ELRO SF40GA11 Manual de usuario
English 02 - 14
Deutsch 16 - 29
Nederlands 31 - 44
Français 46 - 59
Hereby, ELRO Europe declares that the radio equipment type SF40GA11
is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
www.elro.eu/compliance
K1 CONNECTOR
ELRO CONNECTS
SF40GA11 Home is not a place, it’s a feeling
-2-
EXPLANATION
The ELRO K1 Connector is the heart of your ELRO Connects system. It
connects all your ELRO Connects products to the free ELRO Connects
App. With the ELRO Connects App you gain full control of your home,
making it a more comfortable and safe environment for you and your
family. ELRO Connects is a plug & play system, developed for anyone to
use and enjoy. 3 step installation
1. Download the ELRO Connects App
Download the “ELRO Connects” app from
the Apple App Store or Google Play Store.
To enjoy all the functions of the ELRO
Connects system, make sure to allow the
app to send push notifications and use
your current location.
2. Register an Account
When opening the app for the first time,
the login screen will pop-up. Please press
‘Create an account’ (1) on the bottom
right corner of the app.
-3-
Enter your e-mail address (2). To verify
your e-mail address, please press ‘Get
code’ (3). Now a pop-up will appear in
which you need to fill in a graphic
verification code (4). (Be aware of capital
and lower case letters!)
After you've entered the graphic's
verification code, you'll receive an e-mail
from the ELRO Connects App.
The verification code you received in your
e-mail needs to be filled in left to the
“Get code” button (3).
Next, type in the password (5) you need
to use at least 8 digits, a mix of
upper/lower case letters and numbers
and/or special characters. Re-enter the
password in the field underneath and
press ‘Create an account’. You can check
the password by pressing on the eye
symbol! The login screen will appear and
you can login to the app by using your
email and created password.
-4-
3. Connect the K1 Connector to theapp
Once you have logged into the app, you
are taken to the network configuration.
Plug in the K1 connector into a power
outlet and wait for the LED indicator to
turn green.
Next, press the K1 Connector's button (1)
for at least 3 seconds until the LED
flashes blue. (2) Press ‘Next’.
In the next screen, type in your Wi-Fi
network password (3) and press
‘Configure’. The connector will now
connect with your Wi-Fi network. This
will take approximately 1 minute. You’ll
be informed whether the connection was
successful or not.
Make sure that you use a 2.4GHz Wi-Fi
signal. This means that this cannot be a
Wi-Fi signal that exists of both 2.4GHz
and 5GHz signals. We recommend that
you turn of the 5GHz signal when
installing the K1. After the installation
you can turn this signal back on again.
-5-
Connect ELRO Connects products to the app
Connecting the different ELRO Connects products to your app is very
easy and will take you very little time. First, go to the Device List by
tapping the ‘Devices’ (1) at the bottom right corner of your Home
screen. Next, tap the ‘+’ in the upper right corner (2).
-6-
Quickly press the button on your ELRO
Connects device 3 times (3). When the
connection with the ELRO Connects
device is successful the LED of the K1
Connector will quickly blink 10 times and
you'll receive a notice in the app.
Please note! The ELRO Connects Water
Detector (FW3801R) doesn't have a
button, use a screwdriver to touch both
sensors 3 times in success.
Congratulations!
You successfully connected an ELRO
Connects product to your app. You can
now name the product and use it in your
app to control with your smartphone, use
in scenes etc.
Scenes
Your ELRO Connects app has 3 pre-installed
operation modes “Home, “Away” and
“Sleep”. You can switch between these
operation modes by tapping the button in
the middle of your Home screen and select
the desired mode.
Creating scenes
Press the "Scenes" button at the bottom of the start screen. Here you
can set up various scenes for your ELRO Connects system. It is possible
to add various automatic actions to these scenes to automate
everything. To create a scene, simply press the "+" (1) in the scene
overview. A screen will appear where you can add conditions and link
them to an action that needs to be executed (2). You can also use the
following menu items to set up your own automatic actions. It is
possible to modify a scene by pressing one of the scenes.
-7-
Automatic actions
So it is possible to set an automatic action on a scene. You can assign
one or more conditions to an automatic action. If one or more of these
conditions are met, the automatic action will be executed. For example,
it is possible to have a plug switch on when a door is opened. By
following the steps below you can easily create automatic actions
yourself. In the scene overview, press the plus sign to create an
automatic actions (1). You can then give a name to the automatic action
(2).Add the conditions that will trigger the automatic action (3). This
can be a timer or a button press, for example (4). Then determine which
action should be performed when one or more of the conditions are
met (5). The list of actions will grow as different products are added to
your system (6).
Please note! When only using fire protection products, it is not necessary
to create automatic actions. There are also a number of standard
automatic actions for intrusion protection. You therefore do not need to
set these up yourself either.
-8-
-9-
Timers
On the home screen, press the "Scenes" button at the bottom of the
home screen. To set a timer, press the clock in the top left corner of
your screen. You will then see an overview of all your set timers. By
pressing the plus sign you can set a time when a scene will start
automatically. For example, you can set the "Sleep mode" to be
activated at 23:00 every day.
-10-
Explanation of the app
Below is an overview of all the app's
functions with explanations.
1. Connector list: Here you can find
all the connectors which are
connected to the account. You can
also delete a connector and change
the name of one.
2. Scene switching: Switch between
the different scenes of the system.
3. Alarm history: previous alarms are
stored here.
4. Home page, scene overview and
device list. Home page, scene
overview and device list.
5. Change Password: Change the
password for the account.
6. Configure your connector: add a
second connector to the app.
7. Location settings: here you can
turn the location facilities on or off.
8. Emergency number: Add an
emergency number. This can be
used as a shortcut. Simply call this
number in case of emergency. This
number is not automatically called
by the app.
Tabla de contenidos
Idiomas:
Otros manuales de Cables y conectores de ELRO
