Elisa Viihde Manual de usuario
Elisa Viihde
TV service manual
2
Table of Content
1. Kit contents 3
2. Remote control 3
2.1 Remote control 4
3. Installation of the equipment 4
3.1. Quick guide to installation 4
3.2 Digibox installation 5
3.2.1 Digibox connection to antenna or cable network 5
3.2.2 Digibox connection to broadband 5
3.2.3 Digibox connection to TV 5
3.2.4 How to start using the remote control 6
3.2.5 Power cable connection 6
3.2.6 Digibox connection to your stereo or home theatre 7
4. TV service access 8
4.1 Quick guide to TV service access 8
4.2 Guide to TV service access 8
4.2.1 Before you start 8
4.2.2 Language selection 9
4.2.3 Image settings 9
4.2.4 Aspect ratio selection 10
4.2.5 Network selection 10
4.2.6 Channel search 10
4.2.7 Parental Control PIN Code 11
IMPORTANT NOTE ON INSTALLATION 11
4.2.8 Broadband connection 12
5. TV services 12
5.1 Quick guide to watching TV 12
5.1.1 Channel navigation 12
5.1.2 Channel list 12
5.2 Time settings 13
5.3 Programme Guide and programme recording
with the aid of the remote control 13
5.4 Elisa Viihde menu 14
5.4.1 Recorded programmes and playing back recorded programmes 14
5.4.2 Video Store 15
5.4.3 Pay channels 16
5.4.4 News releases 16
6. Menu button 17
6.1 Elisa Viihde portal 17
6.2 TV Programme guide 17
6.3 Settings 18
6.3.1 Picture 18
6.3.2 Sound 18
6.3.3 Display 18
6.3.4 Network 19
6.3.5 Channel search 19
6.3.6 Favourites 19
6.3.7 Parental control 19
6.3.8 Diagnostics 20
7. Computer access to the services 21
8. Mobile access to the services 23
8.1 Mobile user interface 23
8.2 Smartphone remote access 24
9. Digibox settings 25
9.1 TV settings 25
9.2 Network settings 25
10. Digibox specications 25
11. Digibox connection ports 26
3
1. Kit contents
The Elisa Viihde kit includes one digibox and all the necessary
accessories.
.
Elisa Viihde digibox Elisa Viihde remote control Antenna cable
HDMI cable Ethernet cable Power supply unit
2. Remote control
4
2.1 Remote control
The Elisa Viihde digibox is operated with the aid of the remote control
included in the kit. The functions assigned to the remote control
buttons may vary depending on the operation mode. When the remote
control signal is sent to the digibox, the power button LED will ash,
indicating that the digibox is receiving a signal from the remote control.
NOTE! The remote control has two power buttons. To turn on the Elisa
digibox use the left-hand power button.
Please note that during operation the remote control should always
be directed towards the front panel of the digibox. Any obstructions
between the remote control and the digibox will interfere with the
remote control’s signal to the digibox.
3. Installation of the
equipment
3.1. Quick guide to installation
1. Connect the digibox to the antenna and cable network with the
antenna cable.
2. Connect the Elisa Viihde digibox to a broadband modem: plug
one end of network cable to a Network port and the other end to a
free port in the Elisa Viihde broadband modem.
3. Connect the digibox and the TV together: connect one end of the
cable to the digibox HDMI port and the other end to the TV HDMI
port. If your TV has no HDMI port or no free HDMI port, use a SCART
cable. Connect one end of the SCART cable to the digibox TV port
and the other end to the TV SCART port.
4. Install batteries in the remote control.
5. Connect the power cable to the digibox: connect the power cord
to the digibox port and the other end to the mains outlet.
6. Turn the TV on. Select your TV IN port (normally AV IN port). If the
digibox is connected to the TV with an HDMI cable, select the HDMI
IN port.
7. Turn the digibox on.
8. The Elisa Viihde digibox is now ready for use. Please refer to
section 4 of this manual for more information on how to start using
the services.
Digibox connection to various devices
5
3.2 Digibox installation
3.2.1 Digibox connection to antenna or cable
network
3.2.2 Digibox connection to broadband
.
Note! If the digibox and broadband modem are located far from each
other or cannot be connected via the network cable, you can connect
the devices using electrical cables. For further information on electrical
connection, please refer to the Elisa Services page at: www.elisa./
viihde/tekniset/.
3.2.3 Digibox connection to TV
We recommend using an HDMI cable for device connection to a TV. This
connection provides the best picture and sound quality. If your TV has
no HDMI port, please use the SCART port.
Note! If you use the SCART port, please be careful during cable
connection – most image quality problems are caused by a poor SCART
connection.
Digibox antenna ports and antenna cable
Digibox network port and network cable
HDMI and SCART ports
6
Connect one end of the HDMI cable to the digibox HDTV port and the
other end to the HDMI port in your TV (for TVs with HD Ready and Full
HD labels). If you use the SCART port, connect one end of the SCART
cable to the digibox TV port (TV) and the other end to the SCART port in
your TV
3.2.4 How to start using the remote control
Install the batteries supplied in the kit into the remote control. To open
the battery compartment lid, press on the lid with your thumb and push
the lid down. Install the batteries correctly, matching the symbols, then
push the lid back in to place to close.
3.2.5 Power cable connection
Connect the cable to the digibox power port and the other end to the
mains outlet.
Note! Use only the original power cable supplied with the kit!
SCART and HDMI cables
Power port and power supply unit with cables
7
3.2.6 Digibox connection to your stereo or
home theatre
Elisa Viihde can be plugged into your stereo/home theatre to achieve
best sound and picture quality. The connection can be either analogue
RCA or optical. Sound output can be either a stereo or Dolby Digital
signal. When using a Dolby Digital signal, you can take advantage of
multi-channel sound while, for example, watching rental video DVDs on
TV.
The Elisa Viihde digibox can be connected to some of the latest
home theatres with the aid of an HDMI cable. In this case, for image
transmission to the TV a separate HDMI cable connection between the
home theatre and TV is necessary.
Please note that the Elisa Viihde kit does not include audio cables for
digibox connection to a stereo/home theatre.
Audio ports – optical port on the left and RCA port on the right
8
4. TV service access
4.1 Quick guide to TV service access
Start using Elisa Viihde TV services by following the TV screen
instructions and the instructions below:
1. Turn on your TV and select the input interface (normally AV).
2. If you are using HDMI for the digibox connection to the TV,
select the appropriate symbols by following the TV’s on-screen
instructions.
3. Activate the TV service by pressing the OK button on the remote
control.
4. Select English or Finnish as the user language.
5. Select the appropriate picture settings.
6. Enter your Parental Control PIN code by using the remote control
numeric pad and re-enter this PIN-code.
7. Select antenna or cable network for the digibox. If you have
selected cable network, select the TV channel search mode and
start channel searching by pressing the OK button.
8. Wait until the TV channel auto tuning is completed. Channel
search may take several minutes. Channel search progress will be
displayed on the screen. When the channel search is completed, a
summary of the channels found will be displayed.
9. Select your TV screen type: 16:9 (widescreen TV) or 4:3
(conventional TV).
10. Exit the start menu by pressing the OK button on the remote
control.
4.2 Guide to TV service access
4.2.1 Before you start
Turn on your TV, then turn on the digibox. Select from your TV input
interface (channel) for the digibox connection (normally the AV
channel).
Continue to access start by pressing the OK button on the remote
control in the Welcome (Tervetuloa) screen.
Digibox installation start-up
9
4.2.2 Language selection
Select Finnish or English as the user language.
.
4.2.3 Image settings
If you are using an HDMI cable for the digibox connection to the TV,
you will need to select the desired image settings at the beginning of
service access. At the start, the device will oer various display modes
by scrolling from the highest resolution HD mode to lower resolution
modes.
Each display mode will be displayed for 15 seconds; when you nd the
mode suitable for your TV, select it by pressing the OK button. If you
have not selected any of the modes, the display mode will stop at the
lowest resolution mode. If necessary, you can restart display mode
scrolling.
The most appropriate display mode for your TV can be recognized by a
clear picture with no black areas on the screen.
Note! If you are using a SCART cable for the digibox connection to the
TV, the display mode will be selected automatically.
Display mode selection for HDMI cable connection
Display mode selection for HDMI cable connection
Display mode selection for HDMI cable connection
10
4.2.4 Aspect ratio selection
Select your TV screen type: 16:9 Normaali or 4:3 Pan & Scan. After
selecting the desired aspect ratio, save the selection and continue by
pressing the OK button on the remote control.
4.2.5 Network selection
Select the connection type and press OK.
4.2.6 Channel search
Use the remote control to select the digibox connection to the antenna
or cable network and press the OK button on the remote control. If you
have selected the cable network, use the arrow keys on the remote
control to select the desired search mode. After network selection, the
device will start the TV and radio channel search.
Channel search progress will be displayed on the screen. When the
channel search is completed, a summary of the channels found will be
displayed. To proceed, press the OK button. To start using the TV, press
the OK button again.
TV screen type selection
Network selection
Channel search started
Tabla de contenidos
