Eliminator Lighting Electro Swarm Manual de usuario

Electro Swarm SPECIFICATIONS:

Model: Electro Swarm

Supply Voltage: 90V ~ 240V 60Hz/50Hz

LEDs: 6 x 1W (2 Red, 2 Green, &

2 Blue)

Power Consumption: 15W

Beam Angle: 90 Degrees

Weight: 5.3 lbs./ 2.5kgs

Size: 14.5”(L) x 10.6”(H) x

10.6”(W)

Fuse: 2 Amp

Working Position: Any Safe position

Duty Cycle: None

Colors: Multiple Colored Lenses

Warranty: 1 Year

CAUTION! Please read and

understand these instructions

before installing or operating

this unit.

Operating Instructions:

The Electro Swarm is a powerful effect for clubs and dj’s. The Electro Swarm creates a dramatic

cluster of stobing, multi-colored beams. This unit features an internal microphone that allows the

beams to be triggered by sound. The Electro Swarm is ready to be hung or set on the ground in a

safe position. When mounting this unit to truss be sure to use a clamp. Plug the unit in to a stan-

dard wall outlet. After plugging the unit in, the fixture will react to the beat of the music via the sound

active internal microphone. The unit has a sensitivity knob on the rear of the unit that makes more or

less sensitive to sound. Turning the knob in clockwise direction will make the unit more sensitive to

sound. The unit requires sound to activate the movement.

Master-Slave Operation: This function will allow you to link up to 16 units together and operate. The

units will be sound activated. In Master-Slave operation one unit will act as the controlling unit and the

others will react to the controlling unit. Any unit can act as a Master or as a Slave. See set up below.

1. Using standard XLR microphone cables, daisy chain your units together via the XLR connector

on the rear of the units. Remember the Male XLR connector is the input and the Female XLR con

nector is the output. For longer cable runs we suggest a terminator at the last fixture.

2. The dipswitch settings for Master/Slave mode is as follows. On the Master unit flip dipswitch #1

and #2 to the “OFF” position. On the Slave unit set dipswitch #1 and #2 to the “ON” position.

3. Use the sensitivity knob on the rear of the master unit to make it more or less sensative to sound.

©Eliminator® Bell, CA. - wwwEliminatorLighting.com

Caution! Never open unit when in use.

1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our

1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with

dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover

items or parts prone to wear and tear: lamps, leds, fuses, brushes and belts. Eliminator Lighting war-

ranty is only valid with-in the United States.

©Eliminator® Bell, CA. - wwwEliminatorLighting.com

Tabla de contenidos

Otros manuales de Equipo de DJ de Eliminator Lighting

Eliminator Lighting

Eliminator Lighting Mini Par RGBW LED Manual de usuario

Eliminator Lighting

Eliminator Lighting E 146 CYCLOPS Manual de usuario

Eliminator Lighting

Eliminator Lighting Stealth Wash Zoom Manual de usuario

Eliminator Lighting

Eliminator Lighting EM12 Manual de usuario

Eliminator Lighting

Eliminator Lighting Follow Spot 100 LED Manual de usuario

Eliminator Lighting

Eliminator Lighting LED CLOUD Manual de usuario

Eliminator Lighting

Eliminator Lighting COSMIC BURST Manual de usuario

Eliminator Lighting

Eliminator Lighting LED Moon Beam Manual de usuario

Eliminator Lighting

Eliminator Lighting Mini Par UV LED Manual de usuario

Eliminator Lighting

Eliminator Lighting E 141 OCTO BAR Manual de usuario

Eliminator Lighting

Eliminator Lighting FROST FX BAR RGBW Manual de usuario

Eliminator Lighting

Eliminator Lighting MEGA PAR PROFILE EP Manual de usuario

Eliminator Lighting

Eliminator Lighting TriDisc9 LED Manual de usuario

Eliminator Lighting

Eliminator Lighting Moon Beam Manual de usuario

Eliminator Lighting

Eliminator Lighting Katana LED Manual de usuario

Eliminator Lighting

Eliminator Lighting EZ8 System Manual de usuario

Eliminator Lighting

Eliminator Lighting UV Disc Manual de usuario

Eliminator Lighting

Eliminator Lighting Furious Five RG Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

Eliminator Lighting

Eliminator Lighting EM20 Manual de usuario

Eliminator Lighting

Eliminator Lighting EM30 Manual de usuario

Eliminator Lighting

Eliminator Lighting E 143 ASTEROID Manual de usuario

Eliminator Lighting

Eliminator Lighting Electro 64 BLED Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario

KAM

KAM DMX Laser80 FScan Manual de usuario