Electrolux EPH09MLIW Manual de usuario

EPH09MLIW

EPH12MLIW

EXH09RLEW

EXH12RLEW

BRUGERVEJLEDNING

User Manual

BRUKSANVISNING 48

BRUKSANVISNING 70

OHJEKIRJA 92

2 www.electrolux.com

TABLE OF CONTENTS

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with

it decades of professional experience and innovation. Ingenious and stylish, it has been

designed with you in mind. So whenever you use it, you can be safe in the knowledge that

you’ll get great results every time.

Welcome to Electrolux.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.electrolux.com

www.electrolux.com/productregistration

Buy Accessories, Consumables and Original spare parts for your appliance:

www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.

The information can be found on the rating plate. Model, PNC, Serial Number.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

Safety precautions .................................................................................................... 3

Description................................................................................................................ 6

Remote control ......................................................................................................... 6

Cleaning and maintenance...................................................................................... 12

Troubleshooting....................................................................................................... 13

Operation tips ......................................................................................................... 15

Installation............................................................................................................... 16

Health ﬁlter.............................................................................................................. 25

ENGLISH 3

SAFETY PRECAUTIONS

Read the manual carefully before operation.

Keep the manual for further reference.

If something abnormal occurs (e.g. unpleasant smells of

burning), disconnect the unit from the power supply and

contact an authorised service centre. If the abnormality

remains, the air conditioner may be damaged or even cause

electric shock or ﬁre.

Before cleaning or maintenance, switch off the unit and

disconnect the unit from the power supply. If the unit is

connected to a fuse box, remove the fuse.

If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualiﬁed persons

in order to avoid a hazard.

Do not use an unspeciﬁed mains cord to prevent electric

shock or ﬁre.

The unit must be installed according to national regulations

for electrical safety. Incorrect wiring can lead to over heat or

ﬁre in the cable, the plug or the electrical outlet.

Do not switch on and off the unit frequently.

If the voltage is too high, electrical elements will be damaged

easily, If the voltage too low, the compressor will vibrate

ﬁercely and damage the cooling system or the compressor.

Electrical components cannot be operated.

Make sure that the unit is properly grounded to prevent

electric shock.

This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

SAFETY PRECAUTIONS

Do not attempt to repair the unit yourself to prevent electric

shock or ﬁre. Have the unit repaired by an authorised service

centre.

Keep combustible materials at least 1 m from the unit to

prevent ﬁre or explosion.

Install the outdoor unit ﬁrmly to prevent personal injury.

Do not stand on the outdoor unit. Do not place heavy things

on the outdoor unit.

Do not block the air inlet or the air outlet.

Do not splash water on the unit to prevent electric shock.

Do not operate the unit with wet hands to prevent electric

shock.

Do not insert your hands or objects into the air inlet or the air

outlet.

Do not expose animals or plants directly to the air ﬂow.

Do not expose yourself to cold air directly for a long time.

Do not use the unit for any other purpose, such as preserving

food or drying clothes.

Select the most appropriate temperature to save electric

energy.

Do not keep windows and doors open for a long time during

operation.

To change the airﬂow direction, use remote control to adjust

the horizontal and vertical airﬂow direction.

Do not use ﬁre or hair dryer to dry the ﬁlter to avoid

deformation or ﬁre hazard.

Keep heat sensible material at least 1 meter far from

air ﬂow to prevent damaging.

4 www.electrolux.com

SAFETY PRECAUTIONS

tDo not dispose this product as unsorted municipal waste.

Collection of such waste separately for special treatment is

necessary.

Please ﬁnd the Electrolux web addresses to your local country from below table.

You can also get this manual through your local distributor or

by visiting our website.

Please visit www.electrolux.com for more information.

This marking indicates that this product should not be disposed

with other household wastes throughout the EU. To prevent

possible harm to the environment or human health from

uncontrolled waste disposal, recycle it responsibly to promote the

sustainable reuse of material resources. To return your used

device, please use the return and collection systems or contact the

retailer where the product was purchased. They can take this

product for environmental safe recycling.

Correct Disposal of this product

ENGLISH 5

Albania www.electrolux.al

Austria www.electrolux.at

Belgium www.electrolux.be

Bulgaria www.electrolux.bg

Croatia www.electrolux.hr

Czech Republik www.electrolux.cz

Denmark www.electrolux.dk

Finland www.electrolux.ﬁ

France www.electrolux.fr

Germany www.electrolux.de

Greece www.electrolux.gr

Hungary www.electrolux.hu

Italy www.electrolux.it

Luxembourg www.electrolux.lu

Netherlands www.electrolux.nl

Norway www.electrolux.no

Poland www.electrolux.pl

Portugal www.electrolux.pt

Romania www.electrolux.ro

Serbia www.electrolux.rs

Slovakia www.electrolux.sk

Slovenia www.electrolux.sl

Spain www.electrolux.es

Sweden www.electrolux.se

Switzerland www.electrolux.ch

Turkey www.electrolux.com.tr

UK & Ireland www.electrolux.co.uk

Country Website address Country Website address

6www.electrolux.com

DESCRIPTION

REMOTE CONTROL

10 11 3

1Indoor unit

2Air inlet (indoor unit)

3Air outlet (indoor unit)

4Outdoor unit

5Air inlet (outdoor unit)

6Air outlet (outdoor unit)

7Mains cord

8Remote control

9Front panel

10 Filter

11 Horizontal louvre

12 Wall pipe

13 Binding tape

14 Connection pipe

15 Drain hose

16 Drain connector

The remote control can be used for

different models. Depending on the

model, some functions on the remote

control might not be available.

CAUTION

r© $O©NOT©DROP©OR©THROW©THE©REMOTE©

control.

r© $O©NOT©POUR©LIQUID©ONTO©THE©REMOTE©

control.

r© $O©NOT©EXPOSE©THE©REMOTE©CONTROL©TO©

direct sunlight.

r© $O©NOT©PLACE©THE©REMOTE©CONTROL©IN©

areas where it is very hot.

NOTE

r© -AKE©SURE©THAT©THERE©ARE©NO©OBJECTS©

between the signal transmitter on the

remote control and the signal receiver

of the unit.

Mode

Fan

Swing-H

Swing-V

Quiet

Turbo

ION

Filter

Sleep

Clock

X-Fan

Light

I Feel Timer

Timer

Off

ENGLISH 7

Explanation of buttons

Nr. Button Explanation

17 ON/OFF Press the button to switch on the unit. Press the button again

to switch off the unit.

18 MODE Press the button to set the operation mode: AUTO, COOL,

DRY, FAN and HEAT. Default setting: AUTO.

In the AUTO mode, the temperature is not shown. In HEAT

mode, the initial value is 28 °C (82 °F). In other modes, the

initial value is 25 °C (77 °F).

19 FAN Press the button to set the fan speed: AUTO, LOW, MEDIUM

LOW, MEDIUM, MEDIUM HIGH and HIGH. Default setting:

AUTO. In the DRY mode, only LOW can be set.

20 UP ^ Press the button to increase the temperature. Keep the

button pressed for two seconds to accelerate the process.

Release the button to set the temperature and send the order

that the °C/°F signal will be displayed constantly.

Temperature range: 16-30 °C (61-86 °F).

In AUTO mode, the temperature cannot be set. If you press

the UP or DOWN button, a beep will sound.

21 DOWN v Press the button to decrease the temperature. Keep the

button pressed for two seconds to accelerate the process.

Release the button to set the temperature and send the order

that the °C/°F signal will be displayed constantly.

Temperature range: 16-30 °C (61-86 °F).

In AUTO mode, the temperature cannot be set, but the order

can be sent by pressing the button.

22 CLOCK Press the button to set the clock. If the clock symbol blinks,

press the UP or DOWN button to set the time. Keep the

button pressed for two seconds to accelerate the process.

Press the CLOCK button again to set the clock. The clock

symbol stops blinking.

After battery replacement, “12:00 PM” will be shown. If the

clock symbol is visible, the actual time will be shown. If the

clock symbol is not visible, the timer will be shown.

23 LIGHT Press the button to switch the display of the indoor unit on or

off. Default setting: OFF.

24 TURBO In COOL or HEAT mode, press the button to enable or

disable the turbo function. If the turbo function is enabled, the

turbo symbol will be shown. Default setting: OFF.

If the turbo function is enabled, the unit will operate at turbo

speed to cool or heat rapidly so that the ambient temperature

approaches the set temperature as soon as possible.

8www.electrolux.com

If the operation mode or the fan speed is changed, the turbo

symbol will not be shown.

25 X-FAN In COOL or DRY mode, press the button to enable or disable

the X-FAN function. If the X-FAN function is enabled, the

X-FAN symbol will be shown. Default setting: OFF.

If the X-FAN function is enabled, the indoor fan will continue

operation at low speed for 2 minutes after switching off

the unit. This function prevents the possible condensation

on cold parts of the indoor unit. Press the X-FAN button to

switch off the unit during the process.

If the X-FAN function is disabled, the unit will be switched off

immediately.

In AUTO, FAN or HEAT mode, X-FAN is not available.

26 ION-FILTER Press the button to enable or disable the operation of the

health ﬁlter.

27 TIMER ON Press the button to set the timer function for switching on the

unit. If the TIMER ON symbol blinks, press the UP or DOWN

button to set the time. Keep the button pressed for two

seconds to accelerate the process. Press the button to set

the timer. Default setting: 8:00 AM (12-hour mode). Press the

button again to cancel the timer function.

28 TIMER OFF Press the button to set the timer function for switching off the

unit. If the TIMER OFF symbol blinks, press the UP or DOWN

button to set the time. Keep the button pressed for two

seconds to accelerate the process. Press the button to set

the timer. Default setting: 5:00 PM (12-hour mode). Press the

button again to cancel the timer function.

29 SWING-V Press the button to enable or disable the vertical swing

function.

30 SWING-H Press the button to enable or disable the horizontal swing

function.

31 I FEEL Press the button to enable or disable the I FEEL function.

If the I FEEL function is enabled, the I FEEL symbol will be

shown.

If the I FEEL symbol is enabled, the remote control will send

the ambient temperature to the main unit every 10 minutes or

when you press one of the buttons.

32 QUIET Press the button to enable or disable the QUIET function.

If the QUIET function is enabled, the indoor fan operates at

ultra-low speed so that the indoor noise is low.

33 SLEEP Press the button to select (SLEEP 1, SLEEP 2, SLEEP 3 or

SLEEP CANCEL). Default setting: SLEEP CANCEL.

SLEEP 1 In COOL and DRY mode:

ENGLISH 9

Sleep status after 1 hour of operation: The temperature will

increase by 1 °C.

Sleep status after 2 hours of operation: The temperature will

increase by 2 °C.

After this time the unit continues to use the new temperature.

In HEAT mode:

Sleep status after 1 hour of operation: The temperature will

decrease by 1 °C.

Sleep status after 2 hours of operation: The temperature will

decrease by 2 °C.

After this time the unit continues to use the new temperature.

SLEEP 2 In COOL mode:

If you set a temperature of 16-23 °C, the temperature will

increase by 1 °C every hour. After 3 °C, the temperature will

be maintained. After 7 hours, the temperature will decrease

by 1 °C. After this time the unit continues to use the new

temperature.

If you set a temperature of 24-27 °C, the temperature will

increase by 1 °C every hour. After 2 °C, the temperature will

be maintained. After 7 hours, the temperature will decrease

by 1 °C. After this time the unit continues to use the new

temperature.

If you set a temperature of 28-29 °C, the temperature will

increase by 1 °C every hour. After 1 °C, the temperature will

be maintained. After 7 hours, the temperature will decrease

by 1 °C. After this time the unit continues to use the new

temperature.

If you set a temperature of 30 °C, the temperature will

decrease by 1 °C after 7 hours. After this time the unit

continues to use the new temperature.

In HEAT mode:

If you set a temperature of 16 °C, the unit will operate at this

temperature.

If you set a temperature of 17-20 °C, the temperature will

decrease by 1 °C every hour. After 1 °C, the temperature will

be maintained.

If you set a temperature of 21-27 °C, the temperature will

decrease by 1 °C every hour. After 2 °C, the temperature will

be maintained.

If you set a temperature of 28-30 °C, the temperature will

decrease by 1 °C every hour. After 3 °C, the temperature will

be maintained.

10 www.electrolux.com

SLEEP 3 The user-dejned behaviour mode. The time on remote control

will show “1hour”. The temperature to use after 1 hour will

blink.

Press the UP and DOWN buttons to set the desired

temperature. Press the TURBO button again to conjrm.

The value "1hour" will increase to the value "2hours",

"3hours" or ”8hours”. In each step the corresponding

temperature will blink.

Repeat the above (2 3) operation for the "2hours", "3hours"

and ”8hours” steps.

Sleep3: Display the set temperatures:

Select SLEEP 3 without changing temperature. Press the

TURBO button to conjrm.

Note: The above setting or enquiry procedure terminates if

no button is pressed for 10 seconds. The ON/OFF button,

the MODE button and the SLEEP button also terminate the

setting or enquiry procedure.

General operation

1. Disconnect the unit from the power

supply.

2. Press the ON/OFF button to start

the unit.

3. Press the MODE button to set the

operation mode.

4. Press the UP and DOWN buttons

to set the temperature. (Note: It is

unnecessary to set the temperature

in AUTO mode.)

5. Press the FAN button to set the fan

speed.

6. Press the SWING-H and SWING-V

buttons to set the swing.

Optional operation

1. Press the SLEEP button to enable

or disable the sleep mode.

2. Press the TIMER ON and TIMER

OFF buttons to enable or disable the

timer function.

3. Press the LIGHT button to turn

on or to turn off the display of the

indoor unit.

4. Press the TURBO button to enable

or disable the turbo function.

Special functions

AUTO mode

The temperature will not be displayed.

The unit automatically sets the operation

mode.

Locking/unlocking the remote control

Simultaneously press the SWING-V

button and the ION-FILTER button to

lock or unlock the remote control. If

the remote control is locked, the LOCK

symbol will be shown. Press any button

to make the LOCK symbol blink 3 times

and unlock the remote control. If the

remote control is unlocked, the LOCK

symbol will not be shown.

Celsius (°C) ~ Fahrenheit (°F)

If the unit is switched off, simultaneously

press the SWING-H button and the

ION-FILTER button to switch between

Celsius (°C) and Fahrenheit (°F).

Energy-saving function

In COOL mode, simultaneously press

the ION-FILTER button and the CLOCK

button to enable or disable the energy-

saving function. The display shows

”SE”.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Bomba de calor de Electrolux

Electrolux

Electrolux EPI09LEIW Manual de usuario

Electrolux

Electrolux EPH09NLIW Manual de usuario

Electrolux

Electrolux DC6-8HP m Manual de usuario

Electrolux

Electrolux EXl09HL1W Manual de usuario

Electrolux

Electrolux EXH09HX Manual de usuario

Electrolux

Electrolux EXH09HX1WI Manual de usuario

Electrolux

Electrolux EXH09HL1W Manual de usuario

Electrolux

Electrolux EXH09HL1W Manual de usuario

Electrolux

Electrolux CXH09HL1W Manual de usuario

Manuales populares de Bomba de calor de otras marcas

MICROWELL

MICROWELL HP 1000 GREEN Manual de usuario

Sanyo

Sanyo SAP120FCH Manual de usuario

Daikin

Daikin EHYHBH05AA Manual de usuario

Panasonic

Panasonic WH-SDF03E3E5 Guía

Bryant

Bryant 544B Manual de usuario

Airxcel

Airxcel 45000 Series Manual

Mitsubishi Electric

Mitsubishi Electric PUZ-SWM60VAA Manual de usuario

Dimplex

Dimplex LI 16I-TUR Guía del usuario

Carrier

Carrier WSHP Open v3 Guía de configuración rápida

TGM

TGM CTV14CN018A Manual de usuario

Carrier

Carrier 38MGQ Series Manual de usuario

Kokido

Kokido K2O K880BX/EU Guía de solución de problemas

Viessmann

Viessmann VITOCAL 300-G PRO Type BW 2150 Guía rápida

Carrier

Carrier 48EZN Manual de usuario

Viessmann

Viessmann KWT Vitocal 350-G Pro Series Instrucciones de funcionamiento

Ariston

Ariston NIMBUS Manual de usuario

Weishaupt

Weishaupt WWP L 7 Guía del usuario

GE Zoneline AZ85H09EAC Manual de usuario