Electro-Voice ZX5 Manual de usuario

No-compromise

design

Elegant enclosure

with full-face grille

for clean, profes-

sional look

All new DVX3150

15” woofer,

with 500 watts

(AES) continuous

power handling

All new ND2, 2”

voice coil, 1 “exit

neodymium driver

60° x 60°

or 90° x 50°

coverage pattern

Adjustable monitor

angle (45° or 55°)

Integral rigging

points and inserts

for unlimited flying

options

Full line of acces-

sories for all types of

installations

A unique combination of audio perform-

ance, versatility, aesthetics and light weight.

You won’t find another speaker system on

the market that offers the outstanding

sound quality, range of versatility, and

tremendous output capability of the Zx5

anywhere near its size and weight.

Electro-Voice™ is the pioneer of composite

pro audio speakers.It all started in 1982: when

the 100S was launched as the world’s first pro-

fessional 12” speaker in a lightweight com-

posite enclosure. It was followed by the very

popular S200 in 1984. In 1994, the Sx200

made it’s debut, setting new standards in per-

formance and coverage. The Sx200 used an

EVM®woofer, the DH2010A 1” compression

driver and Varipath™ horn geometry.

Then, in 1997, the Sx300 arrived fea-

turing a DL woofer and incorporating

EV’s RMD™ (Ring-Mode-Decou-

pling) technology.

The Sx Series has since become the industry

standard for pro audio speaker applications

worldwide. Now, after more than 20 years of

making composite speakers, EV once again

raises the performance standard in profession-

al sound reinforcement with the launch of the

Zx5.

For more than 75 years, Electro-Voice™

has been one of the very few manufac-

turers that designs and manufactures its

own loudspeaker components to ensure

the highest possible audio performance

of a loudspeaker system. The Zx5 is the

first speaker to feature EV’s all-new DVX

series of woofers, as well as the ND2

neodymium compression driver.

Cool air enters through frame under spi-

der, flows around the voice-coil to absorb

heat, and exits through differential pres-

sure vent in pole piece. Computer aided

design used for suspension components

enable dynamic linearity at very high out-

put levels, reducing distortion to levels

below audibility.

DVX3150

Forced Air Cooled

500W LF Transducer

ND2 2 inch

voice coil diameter

Compression Driver

High-energy, compact Neodymium

motor

provides extended response, and is very

lightweight. Aluminum heatsink supplies

additional power handling for maximum

output, while reducing size and weight to

a minimum. 0.5 mm (0.002”) titanium

diaphragm provides reliability, transient

response, and great HF.

Linear Suspension

Geometry

Extended Low Frequency

Capability, Lower Distortion

Forced Air Directional

Voice Coil CoolingTM

Higher Power Rating

Less Power Compression

Optimized Computer

Modeled Frame

Extra Rugged,

Lower Weight

Precision Phasing

Plug and 0.5 mm

(0002”) Diaphragm

Extended

HF Response

Special Forged

Magnetic

Material

Higher Sensitivity

Lower Weight

Hi-Efficiency Motor

with Integral Heatsink

Compact,

Higher Power

Handling

For long-throw and cluster applications

Computer Optimized

HF Waveguides

Different applications require differ-

ent coverage patterns. Zx5 has

two available: 90°x 50°for wider

areas, 60° x 60° for longer throw

and high intelligibly in reverberant

spaces. Both provide smooth, even

response on and off-axis.

By design, the Zx5 is also a perfect

solution for stage monitors. As dif-

ferent stage sizes require different

monitor angles, the Zx5 offers two

angles without any additional acces-

sories.

For Monitors

For Installations

The Zx5 is available in black or white finish. Both have a cloth-backed, full-face grille for a clean pro-

fessional look. For outdoor applications there is a PI with stainless steel grille, hydrophobic cloth, and

waterproofed gland nut at the output.

Zx5-60 60° x 60° coverage

Zx5-90 90° x 50° coverage

For wider coverage or shorter distances

Single-button fittings can be used

top, bottom, or rear with internal

steel anchor plates. 10 x M8

threaded points that can be used

to suspend the speaker in several

orientations. Wall mounting and

array brackets for many applica-

tions are available.

The MB-5 mounting bracket

allows

for quick, easy and safe mounting

of the Zx5 on to walls or ceilings.

The CB-5 cluster bracker kit is used

to create larger arrays with Zx5.

Both angles 60° and 90° are pro-

vided. For permanent hanging the

EBK-3 eyebolt kit is available. A kit

of three single-stud fittings, the

SSK-1 offers quick relase for mobile

applications.

Integrated Rigging

and Suspension

Accessories for

more versatility

Quality is inherent in using and

owning any Electro-Voice™ prod-

uct, and we stand behind that.

Every Zx5 is built of premium-

quality materials and is carefully

tested to ensure customers satis-

faction. All EV speakers are backed

by a five-year parts-and-labor

limited warranty.

Quality Made in USA

Zx5 mounted with MB-5

(wall/ceiling bracket)

Zx5 - 2-cabinet

vertical array using 2 EBK-3

Zx5 - flying individual

using the integral

attachment points

Zx5 - 2-cabinet array

using 1 CB-5 cluster

bracket kit

Zx5 - 3-cabinet horizon-

tal array using 2 CB-5

cluster bracket kits

Zx5 - 6-cabinet cluster

using 4 CB-5 cluster

bracket kits

Zx5 mounted with PSA-V

“Strong Arm“ using HA-5

Specifications

Zx5-60 Zx5-90

Frequency Response* (-3 dB) 58 Hz - 15 kHz

Frequency Response* (-10 dB) 41 Hz - 20 kHz

Power Handling (long term/Peak) 600W/2400W

Sensitivity 1W/1m 98 dB

Max SPL (calc.) 132 dB

Low Frequency Driver DVX3150, 15” woofer

High Frequency driver ND2, 2” voice coil compression driver

Box Tuning Frequency 50 Hz

X-over frequency 1500 Hz

Impedance (nom./min.) 8 Ohms / 6.5 Ohms

Dispersion (H x V) 60° x 60° 90° x 50°

Input connector Speakon NL4 (Black and white version)

Gland Nut with SOJ Cable (PI versions)

Suspension: 5 location point points for single-stud attachment plates

(2 on top, 2 on bottom, 1 on rear), 3 anchor plates equipped.

10 metric inserts (M8) integrated polmount adapter

Enviromental Spec: IEC529 IP24 / IP44 for PI version

Dimensions H/W/D 686mm x 445mm 406mm (27.00" x 17.50" x 16.00")

Net Weight/ Shipping Weight 21.3kg (41 lbs)

23.2kg (51 lbs)

* Half Space

Americas

Telex Communications Inc. 12000 Portland Ave South, Burnsville, MN 55337, USA

USA-Phone: 1-800-392-3497, Fax: 1-800-955-6831

Canada-Phone: 1-866-505-5551, Fax: 1-866-336-8467

Latin America-Phone: 1-952-887-5532, Fax: 1-952-736-4212

Europe, Africa & Middle-East

Telex EVI Audio GmbH. Hirschberger Ring 45, D 94315, Straubing, Germany

Phone: +49 9421-706 0, Fax: +49 9421-706 265

France: EVI Audio France S.A. Parc de Courcerin, AllÈe Lech Walesa, F 77185 Lognes, France

Phone: +33 1-6480-0090, Fax: +33 1-6006-5103

UK: Shuttlesound Ltd., The Willows Centre, Willow Lane, Mitcham, Surrey CR4 4NX, UK

Phone: +44 208 646 7114, Fax: +44 208 640 7583

Asia & Pacific Rim

Japan: EVI Audio Japan Ltd. 5-3-8 Funabashi, Setagaya-Ku, Tokyo, Japan 156-0055

Phone: +81 3-5316-5020, Fax: +81 3-5316-5031

China: EVI Audio (HK) Ltd. 7th Floor China Minmetals Tower, No. 79 Chatham Road South,

Tsim Sha Tsui, Kowloon, HK , Phone: +852 2351-3628, Fax: +852 2351-3329

Singapore: Telex Pte. Ltd. 3015A Ubi Road 1, 05-10 Kampong Ubi Industrial Estate, Singapore 408705

Phone: +65 6746-8760, Fax: +65 6746-1206

SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

Otros manuales para ZX5

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Oradores de Electro-Voice

Electro-Voice

Electro-Voice Sb120a Instrucciones de montaje

Electro-Voice

Electro-Voice EVC-1122-VIB Manual de usuario

Electro-Voice

Electro-Voice EVX-180 Manual de usuario

Electro-Voice

Electro-Voice SPA75 Guía de dimensiones

Electro-Voice

Electro-Voice EVID-P6.2B Manual de usuario

Electro-Voice

Electro-Voice LS12A Guía de dimensiones

Electro-Voice

Electro-Voice EVX-180A Manual de usuario

Electro-Voice

Electro-Voice XLC118 Manual de usuario

Electro-Voice

Electro-Voice SRO/15L Guía de dimensiones

Electro-Voice

Electro-Voice QRx 115/75 Manual de usuario

Electro-Voice

Electro-Voice ELX112P Manual de usuario

Electro-Voice

Electro-Voice EVID Series Manual de usuario

Electro-Voice

Electro-Voice S-181 Instrucciones de montaje

Electro-Voice

Electro-Voice EVM 12L BlackLabel Manual de usuario

Electro-Voice

Electro-Voice ZX1-90 Manual de usuario

Electro-Voice

Electro-Voice T252 Instrucciones de montaje

Electro-Voice

Electro-Voice Xi Series Xi-1183A/64F Manual

Electro-Voice

Electro-Voice Sentry 100A Instrucciones de montaje

Electro-Voice

Electro-Voice EKX-12P Manual de usuario

Electro-Voice

Electro-Voice QRx 112/75 Manual de usuario

Electro-Voice

Electro-Voice X1-212/90 Manual de usuario

Electro-Voice

Electro-Voice Tour X series Manual de usuario

Electro-Voice

Electro-Voice ZLX-12P Manual de usuario

Electro-Voice

Electro-Voice X-LINE ADVANCE X1i Guía de inicio rápido

Manuales populares de Oradores de otras marcas

argon audio

argon audio IE20 Manual de usuario

Denon

Denon SC-N7 Manual de usuario

Gemline

Gemline Ace 3952 Manual de usuario

Focal

Focal ON WALL 300 Manual de instrucciones

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manual de usuario

SoundLogic

SoundLogic BCCS-6/6395 Manual de usuario

Peavey

Peavey DTH 218 Manual de usuario

Avantree

Avantree Pluto Air Manual de usuario

Morel

Morel Integra Series INTEGRA OVATION 4 Manual de usuario

Oppo

Oppo SONICA Manual de usuario

Bose

Bose SoundLink Wireless Music System Manual de usuario

Rocksteady

Rocksteady Stadium Manual de usuario

Bowers & Wilkins

Bowers & Wilkins 4 Manual de usuario

Sonance

Sonance SONOS OUTDOOR Series Manual de usuario

Pioneer

Pioneer XW-HTD630 Manual de usuario

Onn

Onn BWA16AA002 Manual de usuario

HP GL313AA - USB Speakers PC Multimedia Manual de usuario

Tannoy

Tannoy SYSTEM 600a Manual de usuario