ElectrIQ EQINDTOUCH60LG Manual de usuario
USER MANUAL
TOUCH PANEL HOB WITH TIMER
EQINDTOUCH60LG
Thank you for choosing electriQ.
Please read this user manual before using the Induction Hob and keep
it safe for future reference.
Visit our page www.electriQ.co.uk for our entire range of electricals
2
CONTENTS
SAFETY WARNINGS
3
PRODUCT OVERVIEW
6
INSTALLATION
7
ELECTRICAL CONNECTION
9
OPERATION
11
TURNING THE APPLIANCE ON AND OFF
11
USING THE COOKING ZONES
11
SMART PAUSE
12
SAFETY FUNCTION
12
CHILD LOCK
13
TIMER
13
BOOST FUNCTION
15
COOKING TIPS
16
CARE AND CLEANING
17
HINTS AND TIPS
18
FAULT CODES
19
TECHNICAL INFORMATION
20
SUPPORT
20
3
SAFETY WARNINGS
Your safety is important to us. Please read this information before
using your hob.
ELECTRICAL SHOCK HAZARD
•Do not cook on a broken or cracked hob. If the surface breaks or
cracks, switch the appliance off immediately at the mains and
contact a qualified technician.
•Switch the hob off at the wall before cleaning or maintenance.
•Failure to follow this advice may result in electric shock or death.
HEALTH HAZARD
•This appliance complies with electromagnetic safety standards.
However, persons with cardiac pacemakers or other electrical
implants (such as insulin pumps) must consult with their doctor or
implant manufacturer before using this appliance to make sure that
their implants will not be affected by the electromagnetic field.
•Failure to follow this advice may result in death.
HOT SURFACE HAZARD
•During use, accessible parts of this appliance will become hot
enough to cause burns.
•Do not let your body, clothing or any item other than suitable
cookware contact the Induction glass until the surface is cool.
•Metallic objects such as knives, forks, spoons and lids should not
be placed on the hob surface since they can get hot.
•Keep children away.
•Handles of saucepans may be hot to touch. Check saucepan
handles do not overhang other cooking zones that are on. Keep
handles out of reach of children.
•Failure to follow this advice could result in burns and scalds.
CUT HAZARD
•The razor-sharp blade of a hob scraper is exposed when the safety
cover is retracted. Use with extreme care and always store safely
and out of reach of children.
4
•Failure to use caution could result in injury or cuts.
IMPORTANT SAFETY INSTRUCTIONS
•Never leave the appliance unattended when in use. Boil over
causes smoking and greasy spillovers that may ignite.
•Never use your appliance as a work or storage surface.
•Never leave any objects or utensils on the appliance.
•Do not place or leave any object which can be magnetized (e.g.
credit cards, memory cards) or electronic devices (e.g. computers,
MP3 players) near the appliance, as they may be affected by its
electromagnetic field.
•Never use your appliance for warming or heating the room.
•After use, always turn off the cooking zones and the hob as
described in this manual (i.e. by using the touch controls). Do not
rely on the pan detection feature to turn off thecooking zones when
you remove the pans.
•Do not allow children to play with the appliance or sit, stand, or
climb on it.
•Do not store items of interest to children in cabinets above the
appliance. Children climbing on the hob could be seriously injured.
•Do not leave children alone or unattended in the area where the
appliance is in use.
•Do not repair or replace anypart of the appliance unless specifically
recommended in the manual. All other servicing should be done by
a qualified technician.
•Do not use a steam cleaner to clean your hob.
•Do not place or drop heavy objects on your hob.
•Do not stand on your hob.
•Do not use pans with jagged edges or drag pans across the glass
surface as this can scratch the glass.
•Do not use scourers or any other harsh abrasive cleaning agents
to clean your hob, as these can scratch the Induction glass.
•If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
5
order to avoid a hazard.
•This appliance is designed for indoor domestic use only, and is not
designed for commercial use.
•Do not attempt to move the appliance while in use, or before
sufficient time has elapsed for it to fully cool.
•Always use the appliance on a stable, heat resistant surface.
•Do not use this appliance on a metal surface.
•WARNING: The appliance and its accessible parts become hot
during use.
•Care should be taken to avoid touching heating elements.
•Children less than 8 years of age shall be kept away unless
continuously supervised.
•This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
•Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
•WARNING: Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire. NEVER try to extinguish a fire
with water, but switch off the appliance and then cover flame e.g.
with a lid or a fire blanket.
•WARNING: Danger of fire: Do not store items on the cooking
surfaces.
•The appliance is not intended to be operated by means of an
external timer or separate remote-control system.
6
CONTROL PANEL
PRODUCT OVERVIEW
1. Heat/Timer increase
7. Child lock indicator
2. Heat display
8. Smart pause
3. Heat selection
9. Heat/Timer decrease
4. Timer display
10. Timer selection
5. Timer function/ cooking
zone indicators
11. Boost
6. Child lock
12. Power
HOB
7
INSTALLATION
•After removing the packaging material from the appliance and its
accessories, ensure that the appliance is not damaged. If you
suspect any damage, do not use it and contact an authorized
service person or qualified technician immediately.
•Make sure that there are no flammable or combustible materials
in the close vicinity, such as curtains, oil, cloth etc. which may
catch fire.
•The worktop and furniture surrounding the appliance must be
made of materials resistant to temperatures above 100°C.
•If a cooker hood or cupboard is to be installed above the
appliance, the safety distance between cooktop and any
cupboard/cooker hood should be as shown below.
Minimum 42 cm
Minimum 42 cm
Minimum 65 cm (with hood) Minimum 70 cm (without hood)
•If the base of the appliance is accessible by hand, a barrier made
from a suitable material must be fitted below the base of the
appliance, ensuring that there is no access to the base of the
appliance.
•If the hob is installed above an oven, the oven should have a
cooling fan. • Make sure that the induction hob is well ventilated
and the air inlet and outlet are not blocked.
8
Your hob is supplied with an installation kit including adhesive
sealing material, fixing brackets and screws.
Cut the aperture dimensions as indicated in the figure. Locate the
aperture on the worktop so that, after the hob is installed, the
following requirements are followed.
9
Apply the supplied one-sided self-adhesive sealing tape all the way
around the lower edge of the cooktop. Do not stretch it.
Screw the 4 worktop mounting brackets in to the side walls of
product. Insert the appliance into the aperture.
ELECTRICAL CONNECTION
WARNING: THE APPLIANCE MUST BE EARTHED.
The electrical connection of this appliance should be carried out by
an authorized service person or qualified electrician, according to
the instructions in this guide and in compliance with the current local
regulations.
Before connecting the appliance to the power supply, the voltage
rating of the appliance (stamped on the appliance identification
plate) must be checked for correspondence to the available mains
supply voltage, and the mains electric wiring should be capable of
handling the appliance’s power rating (also indicated on the
identification plate).
10
•During installation, please ensure that isolated cables are
used. An incorrect connection could damage your appliance.
If the mains cable is damaged and needs to be replaced this
should be done by a qualified person.
•Do not use adaptors, multiple sockets and/or extension leads.
•The supply cord should be kept away from hot parts of the
appliance and must not be bent or compressed. Otherwise
the cord may be damaged, causing a short circuit.
•If the appliance is not connected to the mains with a plug, a
all-pole disconnector switch (with at least 3 mm contact
spacing) must be used in order to meet the safety regulations.
•The fused switch must be easily accessible once the
appliance has been installed.
•Ensure all connections are adequately tightened. Fix the
supply cable in the cable clamp and then close the cover.
The terminal box connection is placed on the terminal box.
Tabla de contenidos
Otros manuales de Quemador de ElectrIQ
