ElectrIQ Compact V2 Manual de usuario
USER MANUAL
Compact-V2
9,000 BTU PORTABLE AIR CONDITIONER
Thank you for choosing electriQ
Please read this user manual before using this innovative Air Conditioner and
keep it safe for future reference.
Visit our page www.electriQ.co.uk for our entire range of Intelligent Electricals
Page 2 of 16
CONTENTS
SAFETY INSTRUCTIONS
3
FEATURES
5
PARTS LIST
6
INSTALLATION
7
OPERATION AND SETTINGS
9
REMOTE CONTROL
11
WATER-DRAINAGE
12
MAINTENANCE
13
TROUBLESHOOTING
14
TECHNICAL DATA
15
ELECTRIQ UK SUPPORT
16
200
9.6
Page 5 of 16
FEATURES
⚫Self-evaporative system - no external water tank needed
⚫Compact design – half the size of a normal unit
⚫Louvres outlet closes automatically when shutting down the unit, this prevents dust and
dirt entering the machine.
⚫Bright LCD screen, indicates temperature and operation mode
⚫Advanced LCD Remote control
⚫Compressor protection technology
⚫1-24 hrs start / stop timer
⚫3 speed fan allows user to achieve the best balance between maximum cooling and
lowest noise level
Page 6 of 16
PARTS LIST
1. Castors 7. Remote control
2. Handle 8. Air outlet hose connector
3. Control panel 9. Handle
4. Air outlet Louver 10. Exhaust pipe assembly
5. Air inlet grill 11. Window sealing plate assembly
6. Air inlet
Page 7 of 16
INSTALLATION
Warning：Before using this unit, please keep it upright for at least 3-4 hours.
This unit can easily be moved from one room to another.
While moving the unit please note that it must always be kept upright and then placed on
an even surface.
1. Assemble the fishtail connector on to the hose, by extending the end of the hose and
twisting the fishtail into position (At least 3 full rotations)
2. Twist the connector on the
opposite end of the hose into the
Air outlet hose connector on the
rear of the appliance.
INSTALLATION OF WINDOW KIT
3. Partially open the window and then fix the window kit to the window.
Page 8 of 16
4. Make sure the unit is upright and there are no
obstructions to the air inlets and outlet grill. The
unit should be positioned at least 50cm away from
walls or other objects within the room.
5. Fix the other end of the hose
to the air-outlet window kit
Note: The window kit is only designed to be installed with sliding or sash windows or
doors. The window kit is not designed or to be used with any other style of windows.
However the fish tail adaptor can be used with most windows / doors. When using the
cooling mode ensure that the opening left is as small as possible. The best form of
installation is through a wall duct. Please note that the unit will need to be vented outside.
IMPORTANT SAFEGUARDS
The length of the soft hose extends from 28 cm to 150 cm. If hose is extended above this
length the unit may malfunction and this can invalidate the warranty.
The outlet vent must be well ventilated and not
obstructed as this will cause the unit to overheat.
Avoid bending the air hose more than 30
degrees.
If the unit does not reach the desired venting point it may be installed on a flat surface
such as a table, although precautions should be taken to ensure the unit is not at risk of
falling.
Page 9 of 16
OPERATION AND SETTINGS
POWER BUTTON
Press to turn unit “ON” or “OFF”
MODE BUTTON
Press this button to select between the Cooling, Fan and Dehumidify(Dry) modes
COOLING MODE: Cold air will be expelled through the front of the unit and hot air will
be expelled through the vent hose.
DEHUMIDIFY MODE (DRY): The dehumidify function can only be used when the room
temperature is above 17C. The unit should be set up without a vent hose, moisture is
extracted from the air that passes through the unit. Continuous drainage should be set
up for the moisture collected (Drainage pipe not included). If continuous drainage is
not set up, the internal water tank will fill and FL will display when full.
FAN MODE: No cooling effect, circulates air within the room, vent pipe not required.
UP & DOWN BUTTONS
During the cooling function – These buttons raise or lower the temperature by 1oC for each
press. The minimum temperature is 16oC and maximum is 30oC.
FAN SPEED
Press the SPEED button to select either LOW, MEDIUM or HIGH fan speed.
NOTE: In dehumidifying function, this button is invalid as the unit is designed to run at low
speed in dehumidifying mode.
Page 10 of 16
TIMER BUTTON
The in-built timer will allow you to set the unit to turn on or turn off after a set period of
time, Please note only one timer can be used at any time.
ON TIMER – The timer will turn on the unit automatically after the time set has elapsed.
1. With the unit turned off, press the TIMER button, then set the number of hours’ time
you desire the unit to start by pressing the UP and DOWN buttons.
2. Once the set time has elapsed, the unit will turn on automatically.
3. Press the POWER button before the time has elapsed and the unit will turn on as
normal and the timer will be cancelled
4. The function and fan speed can be set whilst setting the timer.
OFF TIMER – The timer will turn off the unit automatically after the time set has elapsed.
1. While the unit is operating, press the TIMER button then set the number of hours’
time you desire the unit to stop by pressing TEMP+ or TEMP- button.
2. Once the set time has elapsed, the unit will turn off automatically.
3. Press the POWER button before the time has elapsed, the setting time will be
cancelled and the unit will turn off.
TANK FULL INDICATOR
When the water tank is full and requires emptying, FL will flash on the LCD screen. Drain
the tank following the information provided in the water drainage section.
LED DISPLAY
The display indicates the current target temperature or the remaining timer settings. When
the set temperature or the timer is adjusted, the new setting is shown.
The display is also used to show error codes.
COMPRESSOR DELAY PROTECTION
The unit will operate for 3 minutes before the compressor starts, apart from the first power-
on.
ANTI FREEZE PROTECTION
The compressor and water motor will stop working if the copper coil temperature falls
below 0℃ for over 20 seconds. The appliance will remain in defrost mode until the
temperature of the copper coils exceed 8C.
Tabla de contenidos
Otros manuales de Acondicionador de aire de ElectrIQ
ElectrIQ
ElectrIQ ECOSILENT12HPW Manual de usuario
ElectrIQ
ElectrIQ P12HPWR Manual de usuario
ElectrIQ
ElectrIQ P16HP Manual de usuario
ElectrIQ
ElectrIQ ECOSILENT12HPWE Manual de usuario
ElectrIQ
ElectrIQ AIRCUBE Manual de usuario
ElectrIQ
ElectrIQ CMAC10M Manual de usuario
ElectrIQ
ElectrIQ iQool-3MS9K9K9K Manual de funcionamiento
ElectrIQ
ElectrIQ eiQ-CRFC18K Manual
ElectrIQ
ElectrIQ SILENT12-V2 Manual de usuario
ElectrIQ
ElectrIQ iQool9PLUS Manual de funcionamiento
ElectrIQ
ElectrIQ P12CE-V2 Manual de usuario
ElectrIQ
ElectrIQ P15C Manual de usuario
ElectrIQ
ElectrIQ eiQ-12K12KC24KWMINV Manual de funcionamiento
ElectrIQ
ElectrIQ eiQ-3MS9K9K9K Manual de funcionamiento
ElectrIQ
ElectrIQ A1/CMAC10M Manual de usuario
ElectrIQ
ElectrIQ SILENT16 Manual de usuario
ElectrIQ
ElectrIQ AIRFLEX 15 Manual de usuario
ElectrIQ
ElectrIQ eIQ-9WMINV Manual de funcionamiento
ElectrIQ
ElectrIQ iQool9 Manual de usuario
ElectrIQ
ElectrIQ ECOSILENT8 Manual de usuario
