General Instructions Before Riding:
Your Vehicle has been thoroughly inspected by our engineers before delivery
but on the spot checks are equally important. It is always recommended to do
a quick check of the scooter before setting off.
When the key is inserted and turned into the “ON” position, the power indicator
will illuminate. Your scooter is now on and you are now ready to ride.
To avoid unplanned acceleration, always turn the key to the “OFF” position
before dismounting or leaving the scooter unattended.
WARNING
SAFETY NOTICE: Be sure that you are seated on the scooter and
the stands are clear of the floor before touching the throttle
handle. If you twist the throttle before you are ready to go or while
you are mounting/dismounting the scooter, it may run away from
you and could lead to an accident.
This scooter may be ridden in wet conditions, but be sure to avoid soaking it
during cleaning to avoid damaging any of the electric components.
This scooter should not be left in strong direct sunlight for long periods as
some of the electric components may overheat
Motorcyclists must abide by the same traffic rules and regulations as other
motorists. Before taking your scooter on a public road, be familiar with the
traffic rules and regulations and any special requirements for motorcycles.
Riding in “LOW SPEED” mode*
and at an economical speed will greatly increase
range and help with battery longevity.
6
*Only available on unrestricted model (125cc Moped)
