Elation Design LED Par Zoom MH Manual de usuario

Rev. 06/09/2010-visage Ver. 1.0

Design LED Par Zoom MH

Elation Professional

6122 S. Eastern Ave.

Los Angeles, Ca. 90040

www.elationlighting.com

Design LED Par Zoom MH™

©Elation Professional 2 Design LED Par Zoom MH™

Design LED Par Zoom MH™

©Elation Professional 3 Design LED Par Zoom MH™

CONTENTS

1. General Information……………………………………………………………………… 4

a. Introduction………………………………………………………………………. 4

b. Unpacking………………………………………………………..…………..… 3

c. Customer Support…………………………………………….………………… 4

d. Warranty Registration……………………………………………………..…… 5

2. Safety Instructions………………………………………………………........…………. 6

3. Features……………………………………………………………………………………8

4. General Guidelines………………………………………………………………………. 9

5. Fixture Overview…………………………………………………………………………. 10

6. Mounting and Installation………………………………………………………….……. 13

a. Mounting Positions……………………………………………………………… 13

b. Mounting Points…………………………………………………………………. 14

c. Securing………………………………………………………………………….. 15

7. Understanding DMX……………………………………………………………………... 16

a. DMX Connections………………………………………………………………. 16

b. DMX Terminator………………………………………………………………….18

c. 3-Pin to 5-Pin Conversion……………………………………………………….18

8. Fixture Menu……………………………………………………………………………… 20

a. Menu functions………………………………………………………………….. 21

9. DMX Addressing…………………………………………………………………………. 35

10. Operation…………………………………………………………………………………. 36

11. DMX Channel Traits…………………………………………………………………….. 39

a. DMX Channel Values…………………………………………………………… 40

12. Error Codes………………………………………………………………………………. 43

13. Cleaning and Maintenance……………………………………………………………… 44

14. Photometric Data………………………………………………………………………… 45

15. Dimensional Drawings………………………………………………….……………….. 47

16. Circuit Schematic………...……………………………………………………………….48

17. Warranty…………………………………………………………………………………...49

18. Technical Specifications…………………………………………...………….………… 51

Design LED Par Zoom MH™

©Elation Professional 4 Design LED Par Zoom MH™

1. GENERAL INFORMATION

INTRODUCTION: Congratulations, you have just purchased one of the most innovative and

reliable lighting fixtures on the market today! The Design LED Par Zoom MH™ has been

designed to perform reliably for years when the guidelines in this booklet are followed.

Please read and understand the instructions in this manual carefully and thoroughly before

attempting to operate this unit. These instructions contain important information regarding

safety during use and maintenance.

UNPACKING: Thank you for purchasing the Design LED Par Zoom MH™ by Elation

Professional®. Every Design LED Par Zoom MH™ has been thoroughly tested and has

been shipped in perfect operating condition. Carefully check the shipping carton for damage

that may have occurred during shipping. If the carton appears to be damaged, carefully

inspect your unit for damage and be sure all accessories necessary to operate the unit have

arrived intact. In the event damage has been found or parts are missing, please contact our

customer support team for further instructions. Please do not return this unit to your dealer

without first contacting customer support at the number listed below.

CUSTOMER SUPPORT: Elation Professional® provides a customer support line, to provide

set up help and to answer any question should you encounter problems during your set up

or initial operation. You may also visit us on the web at www.elationlighting.com for any

comments or suggestions. For service related issue please contact Elation Professional®.

Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time.

Voice: (323) 582-3322

Fax: (323) 582-3108

E-mail: [email protected]

Forum: www.ElationLighting.com/forum

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to

rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs

Design LED Par Zoom MH™

©Elation Professional 5 Design LED Par Zoom MH™

yourself, doing so will void your manufactures warranty.

Elation Encourages Recycling: Please do not discard the shipping carton in the trash.

Please recycle whenever possible.

WARRANTY REGISTRATION: The Design LED Par Zoom MH™ carries a two year (730

days) limited warranty. Please fill out the enclosed warranty card to validate your purchase.

All returned service items whether under warranty or not, must be freight pre-paid and

accompany a return authorization (R.A.) number. The R.A. number must be clearly written

on the outside of the return package. A brief description of the problem as well as the R.A.

number must also be written down on a piece of paper and included in the shipping

container. If the unit is under warranty, you must provide a copy of your proof of purchase

invoice. Items returned without a R.A. number clearly marked on the outside of the package

will be refused and returned at customer’s expense. You may obtain a R.A. number by

contacting customer support at (323) 582-3322.

Never open this fixture while in use!

This device falls under protection-class 1. Therefore it is essential that the device be

grounded properly.

All electrical connections must performed by qualified personal.

Be sure the available voltage matches the voltage requirements of the unit.

Be sure the power cord is never crimped or damaged. If the power cord is damaged, replace

it immediately with a new one of similar power rating.

Always disconnect from main power before performing any type of service or any cleaning

procedure.

Only handle the power cord by the plug. Never pull out the plug by tugging the wire portion of

the cord.

Please be aware that damages caused by manual modifications to the device are not

subject to warranty.

Design LED Par Zoom MH™

©Elation Professional 6 Design LED Par Zoom MH™

2. SAFETY INSTRUCTIONS

The Design LED Par Zoom MH™ is an extremely sophisticated

piece of electronic equipment. To guarantee a smooth operation,

it is important to follow the guidelines in this manual. The

manufacturer of this device will not accept responsibility for

damages resulting from the misuse of this fixture due to the

disregard of the information printed in this manual.

1. Always be sure that the fan and the air inlets remain clean and are never blocked.

Allow about 6” (15cm) between this fixture and other devices or a wall to allow for

proper cooling.

2. Never touch the fixture during normal operation. This can cause severe personal

injuries and/or damage to the fixture.

3. Be sure to unplug the DESIGN LED PAR ZOOM MH™ from the power outlet

before performing any service related issues.

4. Never look directly into the light beam. You risk injury to your retina, which may

induce blindness.

5. For safe operation, follow the Installation guide described in chapter two of this

manual. Operating the DESIGN LED PAR ZOOM MH™ without suited safety aids

such as safety cables or clamps can increase the risk of damage and/or personal

injury.

6. Installation should only be performed by qualified and certified personal.

7. When mounting this fixture, use only the original rigging parts included with this

fixture. Any structural modification will void the original manufactures warranty and

may increase the risk of damage and/or personal injury.

8. To reduce the risk of fire or shock, do not expose this fixture to rain or moisture.

9. Do not attempt to operate this fixture if the power cord has become damaged or

frayed.

Important Notice: Damages resulting from the disregard of safety and general user

instructions found in this user manual are not subject to any warranty claims.

Design LED Par Zoom MH™

©Elation Professional 7 Design LED Par Zoom MH™

3. FEATURES

•Pan 540˚ / Tilt 265°

•Firmware Upgradeable via Elation E-Load Programming Device

•Low power consumption

•Minimal heat emission

•Equipped with 36 Tricolor, 3 watt LEDs: (12 red, 12 blue, 12 green)

•100,000 hours RATED LEDs

•Variable Zoom (10˚ ~ 60˚)

•Step-less, smooth RGB additive color mixing, 16.7 million colors (24bit)

•Preprogrammed colored macros

•Strobe-effect with a maximum flash rate of 18fps (white or color)

•13 or 11 DMX-channel operation (16 or 8 bit operation)

•Flicker-free operation for television and film

•Brilliant light output

•3 operation mode: DMX controlled, stand alone or sound activated (via internal

microphone)

•Dimmer intensity from 0%~100%

•Control board with 4-digit display and foil-keyboard

•Digital display can be turned 180° to fit different installation position

•RDMX (Remote DMX addressing from any DMX console)

•Auto test for all functions

•Automatic Pan/Tilt Correction

•USITT DMX-512 Complaint

•Value of each DMX-channel can be displayed

•8 User Assignable Program Presets - Internal Program: Edit and save programs to

the incorporated EEPROM through the front control panel or external controller; you

can save a maximum of 48 scenes, and run the saved programs by using the “run”

menu on the front control panel

Design LED Par Zoom MH™

©Elation Professional 8 Design LED Par Zoom MH™

4. GENERAL GUIDELINES

This fixture is a professional lighting effect designed for use on stage, in nightclubs, in

theatres, etc. Do not attempt operation or installation without a proper knowledge on how to

so.

This fixture was designed for indoor use only, use of this product outdoors will void all

warranties written or implied.

Although this fixture has not duty cycle, consistent operational breaks will ensure that the

fixture will function properly for many years to come.

Do not shake the fixture around. Avoid brute force when installing or operating the device.

When choosing an installation location, please be sure the fixture will not be exposed to

extreme heat, moisture, or dust. The minimum distance between the fixture and a wall or flat

surface should be at least .5 meter (about 1.5ft).

Always install the fixture with an appropriate safety cable. When installing the fixture in a

suspended environment always be to use mounting hardware no less than M10 x 25 mm,

also be sure the hardware is insert in the pre-arranged mounting holes in the “Omega” clamp

(see page 14).

When using the quick release “Omega” cam-lock system, be sure the four quick lock

fasteners are locked in the quick lock mounting points properly.

Do not attempt to operate this fixture until you have familiarized yourself with its functions.

Do not permit operation by persons not qualified for operating this type of theatrical fixture;

most damages are the result of operations by persons unfamiliar with this type of product.

Design LED Par Zoom MH™

©Elation Professional 9 Design LED Par Zoom MH™

5. FIXTURE OVERVIEW

1) LED LENS ASSEMBLY – 36 Tricolor, 3 watt LEDs rated at 100,000 hours (12 red,

12 green, 12 blue).

2) YOKE ASSEMBLY- Holds all the electronics and motors that generate the tilt

Design LED Par Zoom MH™

©Elation Professional 10 Design LED Par Zoom MH™

movement.

3) TRANSPORT HANDLE – This fixture contains a build-in carrying handle be sure to

always transport this fixture by the handle and never by grasping the head or yoke

assembly.

4) BASE ASSEMBLY – The main base holds the majority of the electronics and logic

boards. The base also provides a means to securely mount the fixture to the floor or

ceiling.

5) LED MENU DISPLAY – Four segment LED menu display, details all menu functions.

6) MODE/ESC BUTTON – This button is used to access and exit the fixture’s on-board

menu system.

7) UP BUTTON – This button is used to scroll forward when navigating through the

fixture’s menu system.

8) DOWN BUTTON –This button is used to scroll backwards when navigating through

the fixture’s menu system.

9) ENTER BUTTON – This button is used to select and confirm a menu function.

10) POWER SWITCH – This switch controls main power to the unit (if I have to tell you

that, you probably should not be using this fixture!).

11) POWER CONNECTION –This cable provides main power to your fixture. Always be

sure to use a properly grounded power cable. If this cable ever becomes frayed or

damaged this cable should be replaced immediately by a qualified technician.

12) FUSE HOLDER – This housing holds a 4A/250v GMA fuse and is designed to

protect the electronics in the event of severer power fluctuations. Never defeat this

Tabla de contenidos

Otros manuales de Equipo de iluminación de Elation

Elation

Elation Proteus Smarty Hybrid Manual de usuario

Elation

Elation PowerWash 250 Manual de usuario

Elation

Elation Level Q7 IP Manual de usuario

Elation

Elation Opti Tri 30 Manual de usuario

Elation

Elation DLED STRIP RGBAW Manual de usuario

Elation

Elation WW PROFILE HP IP Manual de usuario

Elation

Elation CUEPIX PANEL Manual de usuario

Elation

Elation Design LED 60 TriStrip Manual de usuario

Elation

Elation Elar Quad Par Manual de usuario

Elation

Elation Design Spot 1400E Manual de usuario

Elation

Elation ELAR EXFLOOD Manual de usuario

Elation

Elation PLATINUM BEAM 5R XM485-V1.0-NR Manual de usuario

Elation

Elation ELAR 108PAR RGBW Manual de usuario

Elation

Elation SHOW DESIGNER 2CF Manual de usuario

Elation

Elation ELAR EXQUADPAR HP Manual de usuario

Elation

Elation KL FRESNEL 8 PO Manual de usuario

Elation

Elation Level Q7 IP Manual de usuario

Elation

Elation RGB Lamp Manual de usuario

Elation

Elation Palm Copilot Manual de usuario

Elation

Elation CUEPIX STRIP TRI Manual de usuario

Elation

Elation KL PAR FC Manual de usuario

Elation

Elation Power Spot 700 Manual de usuario

Elation

Elation Event Cylinder DMX Manual de usuario

Elation

Elation 6+ Series Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario