ELAN Lighting ARC-418 Manual de usuario

ARC-418

Thank you for purchasing the ARC-418. Every suit has been thoroughly tested and shipped

in perfect condition. Carefully check the shipping carton for damage that may have occurred

during shipping. If the carton appears to be damaged, carefully inspect your unit for any

damage and be sure all accessories necessary to operate the unit has arrived intactly. In the

case damage has been found or parts are missing, please contact Acson Comercial or your

local supplier for further instructions. Do not return this unit without any warning.

USER’S MANUAL

Contents

FOR YOUR OWN SAFETY, PLEASE READ

THIS USER MANUAL CAREFULLY BEFORE

POWERING OR INSTALLING. SAVE IT FOR

FUTURE REFERENCE

1. Introduction ....................................................................................................... 3

2. General Instructions ......................................................................................... 3

3. Safety Precautions ............................................................................................ 3

4. Set Up ................................................................................................................. 4

5. Operating Instructions ...................................................................................... 4

DMX Mode .................................................................................................... 5

Touch Buttons ............................................................................................... 5

LED Operation Menu .................................................................................... 5

LED Display .................................................................................................. 5

6. DMX Setup ......................................................................................................... 6

7. Cleaning .............................................................................................................. 7

8. Troubleshooting ................................................................................................ 8

1. Introduction

2. General Instructions

3. Safety Precautions

To optimize the performance of this product, please read these operating instructions carefully to familiarize

you with the basic operations of this unit. These instructions contain important safety information regarding

the use and maintenance of this unit. Please keep this manual with the unit, for future reference.

To reduce the risk of electrical shock or fire, do not expose this unit to moisture.

Do not spill water or other liquids into or on to your unit.

Be sure that the local power outlet match that of the required voltage for your unit,

Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or

break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock

and fire in case of an internal short.

Disconnect from main power before making any type of connection.

Do not remove the cover under any conditions. There are user serviceable parts inside.

Never operate this unit when its rear cover is removed.

Never plug this unit into a dimmer pack.

Features

Multi-Colors

Master/Slave synchronization

Color Strobe

LED operation menu with function buttons

Electronic Dimming 0-100%

Sound active mode

DMX-512 protocol

Daisy Chain Units Together in DMX Mode

Caution!

There are no user serviceable parts inside this unit. Do not attempt any

repairs yourself; doing so will void your manufacturer warranty. In the unli-

kely event your unit may require service please contact the manufacturer

or your dealer.

Please recycle the shipping carton whenever possible.

Warning!

To prevent or reduce the risk of electrical shock or fire, Do not expose this

to rain or moisture.

You can use the suit in 4 ways:

• Auto Mode-The unit will automatically chase through the different colors.

• Sound-Active mode–The unit will react to sound, chasing through the built-in programs.

• DMX control mode – This function will allow you to control each individual units traits with a standard

DMX 512 controller.

• Master-slave mode – One unit will work as the master in the one of the above three modes, other units

in the chain will work in synchronization towards the master.

Power Supply

Before plugging your unit in, be sure the source voltage in your area matches the voltage required for your

every suit. Every unit is available in 100v and 240v version. Because line voltage may vary from venue to

venue, you should be sure your unit voltage matches the wall outlet voltage before attempting to operate

you unit.

DMX Linking

To ensure proper DMX data transmission, when using several DMX units try to use the shortest cable path

possible. The order in which units are connected in a DMX line does not influence the DMX addressing. For

example; a unit assigned a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at

the end, or anywhere in the middle. When a unit is assigned a DMX address of 1, the DMX controller knows

to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX chain.

Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between

this device and a wall.

Do not attempt to operate this unit, if it becomes damaged.

This unit is intended for indoor use only; use of this product outdoors voids all warranties.

During long periods of non-use, disconnect the units main power.

Always mount this unit un safe and stable matter.

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to the point they exit from the unit.

Cleaning unit should be cleaned only as recommended by the manufacturer. See ‘Cleaning” for details.

Heat –The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or

other appliances (including amplifiers) that produce heat.

The unit should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D.The appliance does not appear to operate normally or exhibits s marked change in performance.

4. Set Up

5. Operating Instructions

DMX Mode

Operating through a DMX controller gives the user the freedom to create their own programs tailored to their

own individual needs. This function also allows you to use your units as spot lights.

Touch Buttons

There here are four touch buttons under the LED display: Menu,

Up, Down, Enter. Normally, the LED will display the current DMX

address code of the fixture. At this time, presses up and down to

choose the functions you want.

LED Operation Menu

LED screen with four touch buttons: MENU, UP, DOWN and ENTER.

Press MENU to return to the upper menu; Press UP or DOWN to scroll into the menu options or to adjust

the values. Press ENTER to confirm.

After power on and initialization, it will show the status before last power off. Then, the unit is ready for set-

ting and working. Please see the following table for setting information.

1. This function will allow you to control each individual unit’s traits with a standard DMX 512 controller.

2. The LED suit uses 3/4/6DMX channels to operate. Please see “DMX Values and Functions” for the

DMX traits.

3. To run your unit in DMX mode, plug in the unit via the XLR connections to any standard DMX con-

troller. Set your desired DMX address following the setup specifications that come with your DMX

controller.

LED Display

Main Menu Mode Value Functions

/ 001-511 To set the DMX

address code

A001 / Mode A 4channels

(R, G, B, W)

P001 /

Mode P 5channels

(Dimmer, Strobe, R,

G, B, W)

F001 /

Mode F 7channels

(R, G, B, W, Strobe,

Macro, Dimmer)

/ 001-100 Red

/ 001-100 Green

/ 001-100 Blue

/ 001-100 White

/ 001-100 Strobe speed (slow

to fast)

6. DMX Setup

AOOI Mode A 3 Channels RGBW

POOI Mode P 4 Channels RGBW, Dimmer

FOOI Mode F 7 Channels RGB, Dimmer,

Strobe, Macro

Mode A:

Mode P:

/ 001-100 Fade in&out (slow to

fast)

/ 001-100 Color speed

0-49 Auto run

50-100 Sound

DMX setup in 3 modes

Channel Function Value

1 R 0-255

2 G 0-255

3 B 0-255

4 W 0-255

Channel Function Value

1 Dimmer

Dimmer 0-152

Strobe (slow to fast) 153-196

Auto strobe (slow to

fast) 197-242

RGB dimmer 243-255

2 R R 0-255

3 G G 0-255

4 B B 0-255

5 W W 0-255

7. Cleaning

Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried out

periodically to optimize light output.

1. Use normal glass cleaner and a soft cloth to wipe off the outside casing.

2. Clean the external optics with glass cleaner and a soft cloth every 20 days.

3. Always be sure to dry all parts completely before plugging the unit back in.

4. Cleaning frequency depends on the environment in which the unit operates (i.e. smoke, fog residue,

dust, dew).

Mode F:

Channel Function Value

1 R R 0-255

2 G G 0-255

3 B B 0-255

4 W W 0-255

5 Strobe

No function 0-1

Strobe (slow to fast) 2-196

Auto strobe (slow to

fast) 197-255

6 Marco

No function 0-1

Color fade (slow to

fast) 2-19

Color Transient

(slow to fast) 20-39

Color free (slow to

fast) 40-59

Yellow 60-79

Purple 80-99

Light green 100-119

Orange 120-139

Red on and off (10

seconds) 140-159

Green on and off

(10 seconds) 160-179

Blue on and off (10

seconds) 180-199

Light yellow on and

off (10 seconds) 200-219

Cyan on and off (10

seconds) 220-229

White on and off

(10 seconds) 230-249

All on 250-255

7 Dimmer Dimmer (All off—All

on) 0-255

8. Troubleshooting

Unit not responding to DMX:

1. Check that the DMX cables are connected properly and are wired correctly (pin 3 is “hot”; on some other

DMX devices pin 5 may be “hot”).

2. Check that all cables are connected to the right connectors; it does matter which way the inputs and

outputs are connected.

Unit does not respond to sound:

1. Quiet or high pitched sounds will not activate the unit.

2. If problems are not resolved, contact your dealer for service.

Note: All information is subject to change without prior notice.

IMPORTANT INFORMATION!

In order to optimize the recovery and recycling of the materials that old appliances contain

and reduce the impact on human health and the environment, please make sure that this

product is recycled at the end of its life.

Importer:

ACSON COMERCIAL

C/Pallars, 405

08019 Barcelona

www.acson.com

[email protected]

Tabla de contenidos

Otros manuales de Equipo de DJ de ELAN Lighting

ELAN Lighting

ELAN Lighting CABLED-150-SPOT-MKII Manual de usuario

ELAN Lighting

ELAN Lighting PSD 518 Manual de usuario

ELAN Lighting

ELAN Lighting CAB-5R-BEAM Manual de usuario

ELAN Lighting

ELAN Lighting CITYCOLOR-551-UV Manual de usuario

ELAN Lighting

ELAN Lighting CAB-330-MULTI Manual de usuario

ELAN Lighting

ELAN Lighting A2500RGB Manual de usuario

ELAN Lighting

ELAN Lighting CITYCOLOR-551-IP Manual de usuario

ELAN Lighting

ELAN Lighting CABLED-150-BEAM Manual de usuario

ELAN Lighting

ELAN Lighting CLASSICBAR 1831 MATRIX Manual de usuario

ELAN Lighting

ELAN Lighting Classicbar-661 Manual de usuario

ELAN Lighting

ELAN Lighting PSD 512 II Manual de usuario

ELAN Lighting

ELAN Lighting LED-BLINDER-260-RGBW Manual de usuario

ELAN Lighting

ELAN Lighting CABLED-60S-MINI Manual de usuario

ELAN Lighting

ELAN Lighting PSD-218 Manual de usuario

ELAN Lighting

ELAN Lighting PSD-312 Manual de usuario

ELAN Lighting

ELAN Lighting MYTHIC Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario