3
The pump contains particularly powerful magnets. It’s forbidden for those who have
cardiac pacemakers, debrillators, electronic medical devices, metallic heart valves,
metallic prosthesis or sickle cell anaemia, to handle or be in the proximity of the
magnets contained inside the pumps. Consult a health care provider for specic
recommendations before working with these pumps.
The powerful magnetic elds in the proximity of the pumps can damage heart
pacemakers, watches, credit cards, discs and magnetic tapes inside calculators and
computers.
When working in the proximity of pumps, consider that the devices or metallic parts that
you are handling can be unexpectedly attracted towards the pump causing possible
crushing of ngers or hands.
These pumps have been designed and manufactured to be used in specic conditions
and within dened limits. The use outside these specications has to be agreed and
approved by the Ekin Endüstriyel technical service. It must be considered also that,
if the pumps are used outside their technical specications, the CE Certications and
the warranty are no longer valid. Furthermore, if the pump is used outside the technical
specications communicated to us at the moment of the quotation and conrmed in
our order conrmation, the customer becomes responsible for the issue of a new CE
Certication.
The pump has to be used only for the applications specied in the order for which
GemmeCotti has selected the model, the materials of construction and has tested the
pump to respect the specications. For other uses different from those stated in the
order, customer has to call the Ekin Endüstriyel technical ofce.
There will not be any warranty for repairs or alterations on the product done by the
users or third parties not specically authorized by Ekin Endüstriyel. Always shut down
the pump before touching or proceeding with any intervention on it or on the circuit
of installation. The pump must be empty of pumped liquid and it must be completely
decontaminated and successfully rinsed with water before any manual operations or
disassembling.
Make sure that the electrical system to which the pump will be connected has the
adequate power and has the correct protection devices (e.g. grounding, life safe).
Always switch off the electrical supply before working on the pump for maintenance or
part substitution. Always keep an extinguisher next to the pump installed.
Always pay maximum attention in the execution of maintenance activities on pumps and
on the connected circuits when they are used with dangerous liquids.
