Eizo CuratOR EX3220-3D Manual de usuario

Important

Please read this Installation Manual, and “Instructions for Use”

(separate volume) carefully to familiarize yourself with safe and

effective usage.

•Refer to the Instructions for Use for information on the installation /

connection of the monitor.

•The latest Installation Manual is available for download from our web

site:

http://www.eizoglobal.com

Color LCD Monitor

Installation Manual

This product has been adjusted specically for use in the region to which it was originally shipped. If

operated outside this region, the product may not perform as stated in the specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless

prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every

effort has been made to ensure that this manual provides up-to-date information, please note that EIZO

monitor specications are subject to change without notice.

CONTENTS

CONTENTS............................................................. 3

Chapter 1 Basic Adjustment / Setting.............. 4

1-1. Loading the Monitor Settings...................... 4

1-2. Switching Input Signals ............................... 5

1-3. Using Function Buttons ............................... 6

1-4. 3D/2D Switching............................................ 6

Chapter 2 Advanced Adjustment / Setting ...... 7

2-1. Operation via the Main Menu....................... 7

2-2. Individual Functions of Main Menu............. 8

●3D .................................................................... 8

●Input Cong ..................................................... 9

●Video Cong ...................................................11

●System Cong ................................................12

●Function ..........................................................14

●Window Cong ...............................................16

●Remote ...........................................................18

●Control ............................................................21

Chapter 3 Troubleshooting.............................. 22

3-1. No Picture Displayed .................................. 22

3-2. Imaging Problems....................................... 23

3-3. Other Problems........................................... 23

Chapter 4 Reference ........................................ 24

4-1. Main Default Settings ................................. 24

4-2. PinSpecications....................................... 25

Appendix.............................................................. 26

LIMITED WARRANTY............................................. 26

Trademark ............................................................... 27

License .................................................................... 27

Recycling Information ........................................ 28

4Chapter 1 Basic Adjustment / Setting

Chapter 1 Basic Adjustment / Setting

This chapter describes the basic functions that can be adjusted and set by pressing the buttons on the front

of the monitor.

1-1. Loading the Monitor Settings

It is possible to switch to PRESET, FACTORY, or the USER settings that have been set in advance.

PRESET Basic settings are made in advance at the factory. The settings of PRESET cannot be

changed.

FACTORY Returns to settings when shipped from the factory.

USER Various settings including menus can be made for personal use. For details, see “Preset”

(page 12).

1. Press (PRESET).

The preset menu is displayed.

Press to select the PRESET number, FACTORY, or USER number to

load, and then press (ENTER).

The pre-made settings are loaded and the settings are changed. The selectable settings are as

follows.

• PRESET1 to PRESET5

• FACTORY

• USER1 to USER10

Note

• The “PRESET” menu will disappear after ve seconds have elapsed if no operation is performed.

• is displayed for the USER number that has already been registered.

• When selecting a USER number that has not yet been registered, “No Data” is displayed.

• For information about the main default settings, see “4-1. Main Default Settings” (page 24).

Chapter 1 Basic Adjustment / Setting

1-2. Switching Input Signals

Select the signal input to the monitor and display it on the screen.

1. Press (INPUT).

The “Input Select” menu appears.

For other than 2D or 3D mode SIMUL

Press to select an input signal.

This switches to the selected input signal.

Press (INPUT).

The menu screen exits.

Attention

• In 3D mode, input signals other than SDI and DVI cannot be selected.

Note

• If you press (INPUT) while the “Input Select” menu is displayed in dual screen mode, the “Input Select” menu

of the subscreen is displayed.

• When RGB / YPBPR is selected, if the color is abnormal, set it correctly with “Input Cong” (page 9) on the main

menu.

• The “Input Select” menu will disappear after ve seconds have elapsed if no operation is performed.

6Chapter 1 Basic Adjustment / Setting

1-3. Using Function Buttons

Execute the functions assigned to the function buttons (F1 ( ), F2 ( ), F3 ( ), and F4 ( )). For

information on how to set a function to each button, see “Function” (page 14).

1. Press F1 ( ), F2 ( ), F3 ( ), or F4 ( ).

The function menu is displayed.

Press the button with the target function set while the function menu is

displayed.

Note

• In dual screen mode, press (INPUT) to select a screen for performing the target function.

• When the setting of “Function Display” (page 15) is “Off”, the “INVALID FUNCTION” message is displayed if you

press a function button that cannot operate.

• When the setting of “Function Display” (page 15) is “Off”, the “UNDEFINED” message is displayed if you press a

function key assigned to “Undef”.

1-4. 3D/2D Switching

Switch between 3D and 2D.

1. Press 3D/2D ( (ENTER) ) button.

3D and 2D are toggled each time this button is pressed.

Note

• 3D mode indicator ( ) is displayed on the upper left of the screen in 3D mode.

Chapter 2 Advanced Adjustment / Setting

This chapter describes advanced monitor adjustment and setting procedures using the main menu.

2-1. Operation via the Main Menu

1. Menu display

1. Press (MENU).

The main menu is displayed.

2. Press to select the desired item, and then press .

Adjusting / setting

1. Press to select the desired item.

2. Press to set.

If “Next Menu” is displayed for items, press , and a next menu is displayed.

Exiting

1. If you repeatedly press (MENU), the menu screen exits.

8Chapter 2 Advanced Adjustment / Setting

2-2. Individual Functions of Main Menu

●3D

Setting in 3D mode.

Function Setting range Description

3D/2D Selection 3D

Switches 3D/2D display.

Signal Format SIMUL

TOP AND BOTTOM

SIDE BY SIDE

LINE BY LINE

Sets the signal format in 3D mode.

• “SIMUL”

Displays in 3D mode by inputting left-eye signals from DVI-D 1

(SDI 1) and right-eye signals from DVI-D 2 (SDI 2). Displays in

3D mode by inputting Dual-stream signals (SDI 1 (LEVEL B) or

SDI 2 (LEVEL B)).

• “TOP AND BOTTOM”

Displays in 3D mode by inputting signals in TOP AND BOTTOM.

• “SIDE BY SIDE”

Displays in 3D mode by inputting signals in SIDE BY SIDE.

• “LINE BY LINE”

Displays in 3D mode by inputting signals in LINE BY LINE.

Left/Right Swap Off

Switches the displays of the left-eye signal and the right-eye signal.

H Parallax -62 to 62 Adjusts horizontal offset of the left-eye signal and the right-eye

signal. If you do not experience a 3D effect, this may be improved by

adjusting the parallax.

V Parallax -31 to 31 Adjusts vertical offset of the left-eye signal and the right-eye signal. If

you do not experience a 3D effect, this may be improved by adjusting

the parallax.

Attention

• The settings of “Signal Format”, “Left/Right Swap”, “H Parallax” and “V Parallax” cannot be changed in 2D

mode.

Note

• 3D mode indicator ( ) is displayed on the upper left of the screen in 3D mode.

Chapter 2 Advanced Adjustment / Setting

●InputCong

Setting for each input terminal.

Function Setting range Description

SDI Main Stream 1

Stream 2

Sets the picture on Main screen for dual-stream SDI

signal. This is also applied to the single screen mode.

SDI Sub Stream 1

Stream 2

Sets the picture on the subscreen for dual-stream SDI

signal.

RGB/YPBPRYPBPR

RGB-VIDEO

RGB-PC

Sets to match the connected signal at the Y/G, PB/B, PR/R

input terminal.

• “YPBPR”

Set to Y, PB/CB, or PR/CR signal.

• “RGB-VIDEO”

Set to RGB signals. Signal decision gives priority to

VIDEO system.

• “RGB-PC”

Set to RGB signals. Signal decision gives priority to

PC system.

HD15 RGB-VIDEO

RGB-PC

Sets to match signal connected to the HD15 input terminal.

• “RGB-VIDEO”

Signal decision gives priority to VIDEO system.

• “RGB-PC”

Signal decision gives priority to PC system.

Sync. Select (RGB) Auto

Sync on Green

VBS

Sets the synchronization signal input method for the RGB

input terminals.

• “Auto”

Automatically switches between SYNC input and

SYNC on G. When synchronized with SYNC input and

SYNC on G, SYNC input is given priority.

• “Sync on Green”

When synchronized with SYNC input and SYNC on G,

select this to synchronize with SYNC on G.

• “VBS”

Select this when connecting by synchronizing the

composite sync (VBS) signal with the SYNC input

terminal. E.g., when a non-synchronous R / G / B

image signal and a VBS signal output device are

connected to the monitor, connect the VBS signal to

the SYNC input terminal, and select VBS.

Sync. Select (HD15) Auto

Sync on Green

Sets the synchronization signal input method for the HD15

input terminal.

• “Auto”

Automatically switches between HD/VD input and

SYNC on G. When HD/VD input and SYNC on G are

synchronous, HD/VD input is given priority.

• “Sync on Green”

When HD/VD input and SYNC on G are synchronous,

select this to synchronize with SYNC on G

10 Chapter 2 Advanced Adjustment / Setting

Function Setting range Description

Analog

Adjustment

Auto Setup - Automatically adjusts “H Position”, “V Position”, and “Dot

Clock” when the PC signal is input.

H Position 0 to 300 To move screen left and right.

V Position 0 to 100 To move screen up and down.

Dot Clock 0 to 100 When a striped pattern is displayed, adjust so that noise

will decrease when the synchronous striped pattern (noise)

is produced.

Clock Phase 0 to 31 When inputting RGB signals and PC signals, adjust

for ease of viewing if bleeding or blurring of the screen

contour occurs.

Signal Format 4:3

Wide

Sets signal type for unidentiable signals.

Tabla de contenidos

Otros manuales de Monitor de Eizo

Eizo

Eizo RadiForce RS210 Manual de usuario

Eizo

Eizo FLEXSCAN T960 - Manual de usuario

Eizo

Eizo RadiForce GS520-BL Manual de usuario

Eizo

Eizo FlexScan M1700 Manual de usuario

Eizo

Eizo FlexScan L375 Manual de usuario

Eizo

Eizo FlexScan EV2313W Manual de usuario

Eizo

Eizo Foris FS2332-BK Manual de usuario

Eizo

Eizo RadiForce R12 Manual de usuario

Eizo

Eizo FlexScan L560T-CB Guía del usuario

Eizo

Eizo ColorEdge CS2410 Manual de usuario

Eizo

Eizo DuraVision FDS1904 Manual de usuario

Eizo

Eizo FlexScan SX2761W Manual de usuario

Eizo

Eizo RadiForce R31 Manual de usuario

Eizo

Eizo FlexScan L660 Manual de usuario

Eizo

Eizo CuratOR EX3220 Manual de usuario

Eizo

Eizo DURAVISION FDS1901 Manual de usuario

Eizo

Eizo ColorEdge CG247 Manual de usuario

Eizo

Eizo FLEXSCAN HD2441W - SETUP Manual de usuario

Eizo

Eizo DuraVision FDF2305W Manual de usuario

Eizo

Eizo FlexScan EV2216WFS3 Manual de usuario

Eizo

Eizo ColorEdge CG210 Manual de usuario

Eizo

Eizo FLEXSCAN EV2315W - Manual de usuario

Eizo

Eizo FlexScan L362T Manual de usuario

Eizo

Eizo ColorEdge CG245W Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación