Eizo ColorEdge CG210 Manual de usuario

 
 
SAFETY SYMBOLS
PRECAUTIONS
1. INTRODUCTION
1-1.Features
1-2.Package Contents
1-3.Controls & Connectors
2. CABLE CONNECTION
2-1.Before Connecting
2-2.Connecting the Signal 
Cable (D-Sub or DVI)
2-3.Connecting the Signal 
Cable (ADC)
2-4.Connecting Two PCs to 
the Monitor
2-5.How to remove the Tilt 
Stand
3. ScreenManager
3-1.How to use the 
ScreenManager
3-2.ScreenManager 
Adjustments and Settings
3-3.FineContrast
3-4.Useful Functions
4. ADJUSTMENT
4-1.Screen Adjustment
4-2.Displaying a low 
resolution
4-3.Color Adjustment
4-4.Power-save Setup
5. ActiveRotationII Function
6. MAKING USE OF USB 
(Universal Serial Bus)
7. TROUBLESHOOTING
This manual is checked under the browser settings shown 
below. Text size can change for another one through 
browser setting.
Microsoft Internet Exproler:
Text size: Medium
Encoding: Western European

8. CLEANING
9. SPECIFICATION
10. GLOSSARY
APPENDIX/ ANHANG/ 
ANNEXE
About TCO'03(Applicable 
gray)
About TCO'99(Applicable 
black)
FCC Declaration of 
Conformity
Hinweis zur Ergonomie/
Recycling Information/
Hinweise zur Auswahl des 
richtigen Schwenkarms für 
Ihren Monitor

This manual uses the safety symbols below. They denote critical information. Please read them

carefully.

WARNING

Failure to abide by the information in a WARNING may result in serious

injury and can be life threatening.

CAUTION

Failure to abide by the information in a CAUTION may result in moderate

injury and/or property or product damage.

Indicates a prohibited action.

Indicates to ground for safety.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any

form or by any means, electronic, mechanical, or otherwise, without the prior written

permission of EIZO NANAO CORPORATION.

EIZO NANAO CORPORATION is under no obligation to hold any submitted material or

information confidential unless prior arrangements are made pursuant to EIZO NANAO

CORPORATION's receipt of said information Although every effort has been made to ensure

that this manual provides up-to-date information, please note that EIZO monitor specifications

are subject to change without notice.

ENERGY STAR is a U.S. registered mark.

Apple and Macintosh are registered trademarks of Apple Computer, Inc.

VGA is a registered trademark of International Business Machines Corporation.

DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards

Association.

Windows is a registered trademark of Microsoft Corporation.

PowerManager is a trademark of EIZO NANAO CORPORATION.

ScreenManager, ColorEdge and EIZO are registered trademarks of EIZO NANAO

CORPORATION in Japan and other countries.

As an ENERGY STAR®Partner, EIZO NANAO CORPORATION has

determined that this product meets the ENERGY STAR guidelines for

energy efficiency.

IMPORTANT!

●This product has been adjusted specifically for use in the region to which it

was originally shipped. If operated outside the region to which it was originally

shipped, the product may not perform as stated in the specifications.

●To ensure personal safety and proper maintenance, please read this section and

the caution statements on the unit (refer to the figure below).

[Location of the Caution Statements]

If the unit begins to emit smoke, smells like something is burning, or

makes strange noises, disconnect all power connections immediately

and contact your dealer for advice.

Attempting to use a malfunctioning unit may result in fire, electric shock,

or equipment damage.

Do not open the cabinet or modify the unit.

Opening the cabinet or modifying the unit may result in fire, electric shock,

or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing

covers may result in fire, electric shock, or equipment damage.

Keep small objects or liquids away from the unit.

Small objects accidentally falling through the ventilation slots into the

cabinet or spillage into the cabinet may result in fire, electric shock, or

equipment damage.

If an object or liquid falls/spills into the cabinet, unplug the unit

immediately. Have the unit checked by a qualified service engineer before

using it again.

Place the unit at the strong and stable place.

A unit placed on an inadequate surface may fall and result in injury or

equipment damage.

If the unit falls, disconnect the power immediately and ask your dealer for

advice. Do not continue using a damaged unit. Using a damaged unit may

result in fire or electric shock.

Set the unit in an appropriate location.

Not doing so may result in fire, electric shock, or equipment damage.

●Do not place outdoors.

●Do not place in the transportation system (ship, aircraft, trains,

automobiles, etc.)

●Do not place in a dusty or humid environment.

●Do not place in a location where the steam comes directly on the

screen.

●Do not place near heat generating devices or a humidifier.

To avoid danger of suffocation, keep the plastic packing bags away

from babies and children.

Use the enclosed power cord and connect to the standard power outlet

of your country.

Be sure to remain within the rated voltage of the power cord.

Not doing so may result in fire or electric shock.

Power supply: 100-120/200-240 VAC±10 %, 50/60 Hz

To disconnect the power cord, grasp the plug firmly and pull.

Tugging on the cord may damage and result in fire or electric shock.

The equipment must be connected to a grounded main outlet.

Not doing so may result in fire or electric shock.

Use the correct voltage.

* The unit is designed for use with a specific voltage only. Connection to

another voltage than specified in this User's Manual may cause fire, electric

shock, or equipment damage.

* Do not overload your power circuit, as this may result in fire or electric

shock.

Handle the power cord with care.

* Do not place the cord underneath the unit or other heavy objects.

* Do not pull on or tie the cord.

If the power cord becomes damaged, stop using it. Use of a damaged cord

may result in fire or electric shock.

Never touch the plug and power cord if it begins to thunder.

Touching them may result in electric shock.

When attaching an arm stand, please refer to the user’s manual of the

arm stand and install the unit securely.

Not doing so may cause the unit to become unattached, which may result in

injury or equipment damage. When the unit is dropped, please ask your

dealer for advice. Do not continue using a damaged unit. Using a damaged

unit may result in fire or electric shock. When reattaching the tilt stand,

please use the same screws and tighten them securely.

Do not touch a damaged LCD panel directly with bare hands.

The liquid crystal that may leak from the panel is poisonous if it enters the

eyes or mouth.

If any part of the skin or body comes in direct contact with the panel,

please wash thoroughly. If some physical symptoms result, please consult

your doctor.

Follow local regulation or laws for safe disposal.

The backlight of the LCD panel contains mercury.

Handle with care when carrying the unit.

Disconnect the power cord and cables when moving the unit. Moving the

unit with the cord attached is dangerous. It may result in injury.

When handling the unit, grip the bottom of the unit firmly with both

hands ensuring the panel faces outward before lifting.

Dropping the unit may result in injury or equipment damage.

Do not block the ventilation slots on the cabinet.

* Do not place any objects on the ventilation slots.

* Do not install the unit in a closed space.

* Do not use the unit laid down or upside down.

Blocking the ventilation slots prevents proper airflow and may result in

fire, electric shock, or equipment damage.

Do not touch the plug with wet hands.

Doing so may result in electrical shock.

Use an easily accessible power outlet.

This will ensure that you can disconnect the power quickly in case of a

problem.

Periodically clean the area around the plug.

Dust, water, or oil on the plug may result in fire.

Unplug the unit before cleaning it.

Cleaning the unit while it is plugged into a power outlet may result in

electric shock.

In order to suppress the luminosity change by long-term use and to

maintain the stable luminosity, use of a monitor in lower brightness is

recommended.

The LCD panel is manufactured using high-precision technology.

However, note that the appearance of any missing pixels or lit pixels does

not indicate damage to the LCD monitor.

Percentage of effective pixels:99.9994%or higher.

The backlight of the LCD panel has a fixed life span. When the screen

becomes dark or begins to flicker, please contact your dealer.

Do not press on the panel or edge of the frame strongly, as this may result

in damage to the screen. There will be prints left on the screen if the

pressed image is dark or black. If pressure is repeatedly applied to the

screen, it may deteriorate or damage your LCD panel. Leave the screen

white to decrease the prints.

Do not scratch or press on the panel with any sharp objects, such as a

pencil or pen as this may result in damage to the panel. Do not attempt to

brush with tissues as this may scratch the LCD panel.

When the screen image is changed after displaying the same image for

extended periods of time, an afterimage may appear. Use the screen saver

or timer to avoid displaying the same image for extended periods of time.

When the monitor is cold and brought into a room or the room temperature

goes up quickly, dew condensation may occur inside and outside the

monitor. In that case, do not turn the monitor on and wait until dew

condensation disappears, otherwise it may cause some damages to it.

Tabla de contenidos

Otros manuales de Monitor de Eizo

Eizo

Eizo FlexScan S2111W Manual de usuario

Eizo

Eizo FlexScan S2000 Guía del usuario

Eizo

Eizo RadiForce MX216-BK Manual de usuario

Eizo

Eizo FlexScan S2000 Manual de usuario

Eizo

Eizo FlexScan L 788-i Manual de usuario

Eizo

Eizo ColorEdge CS2740 Manual de usuario

Eizo

Eizo RadiForce RX660 Manual de usuario

Eizo

Eizo CuratOR LX491W Manual de usuario

Eizo

Eizo coloredge prominence CG3145 Manual de usuario

Eizo

Eizo FlexScan EV2313W Manual de usuario

Eizo

Eizo CuratOR LX490W Manual de usuario

Eizo

Eizo FlexScan EV3285 Manual de usuario

Eizo

Eizo RadioForce RX650 Manual de usuario

Eizo

Eizo FlexScan HD2442W Manual de usuario

Eizo

Eizo DURAVISION FDX1501 Guía del usuario

Eizo

Eizo DuraVision FDF2182WT Manual de usuario

Eizo

Eizo FlexScan EV2460 Manual de usuario

Eizo

Eizo EIZO ColorEdge CG241W Manual de usuario

Eizo

Eizo FlexScan EV2333W Manual de usuario

Eizo

Eizo CuratOR EX3220-3D Manual de usuario

Eizo

Eizo ColorEdge CG2700X Manual de usuario

Eizo

Eizo RadiForce G11 Manual de usuario

Eizo

Eizo RAPTOR WS3001 Manual de usuario

Eizo

Eizo FlexScan EV2730Q-BK Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación