eisenblatter Gladius 1800 Manual de usuario
Manual
G L A D I U S® 1 8 0 0
THE MULTIFUNCTIONAL GRINDING
SWORD
www.111abrasives.com.au
Phone (07) 5546 6026 Fax: (07) 5546 6381
You have made a good decision buying our GLADIUS® 1800. In just one machine you will find a belt-grinder, fl
at-grinder, belt-polishing-machine, deburring-machine and wood-treatment-machine! GLADIUS® 1800
provides high quality working results, even if used continuously and due to its unique design, this machine
provides solutions to a wide variety of applications. The long, sword-shaped belt driver is guaranteed to
provide you flawless machining of previously inaccessible areas.
It enables also sharp-edged grinding operations in corners of metal constructions.
Even rods in different diameters can be added with fl at surfaces in short time.
Motor speed:
Easy control over the machine speed with continuously adjustable rpm
by thumb-wheel: 1,000-3,800 rpm.
IMPORTANT INFORMATION FOR THE USE OF GLADIUS® 1800: While using fleece belts, solely use the rpm dial
from letters A to C! Using the fleece material with higher speeds can cause, in some cases, material melting and
can harm/stick to the guidance plate.
Speed steps (approx. rpm /approx. belt speed):
E= 2,400 rpm (~ approx. 8 m/sec. belt speed)
F= 2,900 rpm (~ approx. 9 m/sec. belt speed)
G= 3,800 rpm (~ approx. 12 m/sec. belt speed)
A= 1,000 rpm (~ approx. 3 m/sec. belt speed)
B= 1,300 rpm (~ approx. 4 m/sec. belt speed)
C = 1,900 rpm (~ approx. 6 m/sec. belt speed)
D= 2,100 rpm (~ approx. 7 m/sec. belt speed)
Application:
Foreword:
G L A D I U S
®
1 8 0 0
THE MULTIFUNCTIONAL GRINDING SWORD
■GLADIUS® 1800 – Thanks to its design, it allows grinding
of previously impossible areas.
■GLADIUS® 1800 – Grinds smoothly and without chatter
marks on complete lengths of both sides of the sword.
■GLADIUS® 1800 – Long, sword-shaped, belt-driven tool for
processing previously inaccessible areas.
■GLADIUS® 1800 – Simply grind sharp-edged metal
constructs.
■GLADIUS® 1800 – Mobile and stationary use: Optional
equipment stand, (Included in the complete kit).
Turn the machine into a bench-mounted device for precise
work (e.g. knife grinding, de-burring and bevelling).
■GLADIUS® 1800 – Even round rods of varying diameters
can be given a smooth surface finish within a short time.
■GLADIUS® 1800 – World’s most powerful drive motor in
its class and size ensures highest quality working results,
even during constant operation.
■GLADIUS® 1800 –Ideal for all metals, wood and plastic.
TIP
Maintenance:
Changing the carbon brushes:
Remove the plug from the power socket (so there is no electric current anymore!), unscrew and lift/remove
the service cover. Branch off the wires, remove the carbon brushes and clean the carbon brush holder with
compressed air. Insert new carbon brushes (must not be clamped), re-attach the pressure spring. Attach
and screw on the service cover.
When you can observe a carbon-fire through the air entrances on each side of the machine, turn off the
machine immediately before the fire is too intense! This is to prevent the machine from getting seriously
damaged, from this point on it is advised to send the machine back to us.
Only original spare carbon brushes must be used. When not using recommended carbon brushes our warranty
is void.
Cleaning:
The accumulation of metal dust in the inner core of the machine should be avoided, clean the machine
regularly with compressed air.
Gear box:
The gearbox screws must not be dismantled while in the warranty period or our warranty is void. With
unscrewing the bearing bracket, you can remove the worn gear grease and replace it with approx. 16 grams of
new gear grease. The gear grease has to be replaced after approx. 1,500 hours.
Period of warranty:
We grant 12 months warranty (from date of invoice) on all technical and mechanical parts, as long as the
damage is not caused by a third party.
This is how easy it is to replace the carbon
brushes. Simply unscrew the service cover
and open it, re-place the used carbon
brushes, close the cover and secure it.
That’s all there is to it!
Easy, fast replacement of carbon brushes
1 2 3
G L A D I U S
®
1 8 0 0
THE MULTIFUNCTIONAL GRINDING SWORD
TIP
Technical Data
Mains connection 230 V ~ 50 – 60 Hz
(alternative 110 V ~ 50 – 60 Hz)
Rating input 1,750 watts
Speed Infinitely adjustable from 1,000 rpm to 3,800
rpm, with tacho-generator for constant speed
under load.
Belt dimension 40mm x 780 mm
Weight 4.6 kg
www.111abrasives.com.au
Phone (07) 5546 6026 Fax: (07) 5546 6381
5
4
2
3
1
1 2 3 4
5
Details / Features:
Long, sword-shaped, belt-driven
tool for machining previously
inaccessible places. Accesses
them easily thanks to the
innovative design (no protruding
components).
Protective cover with suction flange
for optional connection to all
standard industrial vacuum
cleaners.
Innovative stop button enables
lightning-fast replacement of belt
without using tools.
Very compact, well-balanced
design with bow handle for
fatigue free working in every
position.
Exclusive at Eisenblätter:
Rubberised grip for non-slip
handling.
G L A D I U S
®
1 8 0 0
THE MULTIFUNCTIONAL GRINDING SWORD
www.111abrasives.com.au
Phone (07) 5546 6026 Fax: (07) 5546 6381
Putting on the belt
1. Place the machine upright. Press and hold the
locking pin (1) while applying pressure on the bottom end
with a downward motion, until the locking pin locks. Still hold
the locking pin and release the pressure from the machine
head. Release the pin. Now the gripping mechanism is
activated.
2. Add the desired grinding / polishing belt first on the
driving roller...
and then on the guidance roller.
Application / Operation:
G L A D I U S
®
1 8 0 0
THE MULTIFUNCTIONAL GRINDING SWORD
º
º
1
www.111abrasives.com.au
Phone (07) 5546 6026 Fax: (07) 5546 6381
G L A D I U S
®
1 8 0 0
THE MULTIFUNCTIONAL GRINDING SWORD
3. Again raise the machine upright and apply light
pressure on its tip…
until the locking pin releases automatically.
º
www.111abrasives.com.au
Phone (07) 5546 6026 Fax: (07) 5546 6381
G L A D I U S
®
1 8 0 0
THE MULTIFUNCTIONAL GRINDING SWORD
Adjusting the belt (rear)
To adjust the grinding / polishing belt,here
are the following tools that are included
when the machine is shipped:
-1 x Hexagon socket screwdriver (D)
-1 x Hexagon socket key SW 5 (E)
-1 x Hook wrench (C)
1. Start the machine (speed control on level “C”)
2. Loosen screw 3
3. Turn screw 4 in direction of arrow until the
grinding / polishing belt is in its desired position
4. Tighten screw 3 as well as screw 3a
If there is still adjustment necessary, please repeat
steps 2 to 4.
E
C
D
3
43
3a
www.111abrasives.com.au
Phone (07) 5546 6026 Fax: (07) 5546 6381
www.111abrasives.com.au
Phone (07) 5546 6026 Fax: (07) 5546 6381
www.111abrasives.com.au
Phone (07) 5546 6026 Fax: (07) 5546 6381
G L A D I U S
®
1 8 0 0
THE MULTIFUNCTIONAL GRINDING SWORD
Adjusting the belt (front)
1.Loosen screw 2 slightly (“open”)
2. Turn screw 1 until you reach your desired
position.
3. Tighten screw 2 again.
If there is still adjustment necessary, please repeat steps 1 to 3.
2
2
1
www.111abrasives.com.au
Phone (07) 5546 6026 Fax: (07) 5546 6381
G L A D I U S
®
1 8 0 0
THE MULTIFUNCTIONAL GRINDING SWORD
An example of a grinding / polishing belt sitting
incorrectly on the machine:
Re-adjustment is necessary.
An example of a grinding / polishing belt
that is perfectly positioned onto the
machine.
º
º
www.111abrasives.com.au
Phone (07) 5546 6026 Fax: (07) 5546 6381
G L A D I U S
®
1 8 0 0
THE MULTIFUNCTIONAL GRINDING SWORD
Grinding setups (flat and curved)
B
A
With the aid of screw A and B (see picture)
GLADIUS® 1800 can be converted and used
for either flat or curved grinding.
Curved grinding (for on the spot
grinding applications)
As shown in the picture you can turn the screw to
bend the guiding rail downwards to enable curved
and on the spot grinding, for example to deal with
spot-welds.
Flat grinding
As shown in the picture, turn the screw to
straighten the rail to grind flat and with a
consistent grinding pattern.
TIP:
Ideal alignment of GLADIUS® 1800
To create a flawless grinding pattern, the
machine should be held in an angle of approx.
20° degree to the centre of the work piece
(picture).
º
TIP:
º
approx. 20°
TIP
www.111abrasives.com.au
Phone (07) 5546 6026 Fax: (07) 5546 6381
Tabla de contenidos
Otros manuales de Amoladora de eisenblatter
eisenblatter
eisenblatter PIPE-SNIPER Manual de usuario
eisenblatter
eisenblatter PIPE-FIX+ DUO Manual de usuario
eisenblatter
eisenblatter VARILEX WSF 1600 Manual de usuario
eisenblatter
eisenblatter ROLEI BE 5 Manual de usuario
eisenblatter
eisenblatter VARILEX 1100 Manual de usuario
eisenblatter
eisenblatter PTX COMPACT HT Manual de usuario
eisenblatter
eisenblatter PIPE MAX 802 HT Manual de usuario
eisenblatter
eisenblatter MINI-MAX+ Manual de usuario
eisenblatter
eisenblatter POLY-PTX 802 HT Manual de usuario
eisenblatter
eisenblatter VARILEX WSF 900 Guía
eisenblatter
eisenblatter VARILEX Akku 6112-5.0 Hoja de información del producto
eisenblatter
eisenblatter VARILEX WSF 900 DUO Manual de usuario
eisenblatter
eisenblatter PIPE SNIPER 802 HT Manual de usuario
eisenblatter
eisenblatter VARILEX WSF 1800 Manual de usuario
eisenblatter
eisenblatter VARILEX 1802 HT Manual de usuario
eisenblatter
eisenblatter POLY-PTX 802 HT Manual de usuario
eisenblatter
eisenblatter PIPE-FIX DUO Manual de usuario
eisenblatter
eisenblatter PIPE-MAX Manual de usuario
eisenblatter
eisenblatter VARILEX WSF 900 DUO Manual de usuario
eisenblatter
eisenblatter BAND-IT Manual de usuario
