Eiki EK-620U Manual de usuario

Warping and Blending

Manual AP

Applicable models

EK-620U,621W,625U

EK-800U,810U,811W,815U,820U

Oct., 2019

Contents

Preparation

1. Connection - - - - - 3

2. Projector - - - - - - - 4

3. PC (Laptop) - - - - - 5,6

Operation

・How to connect - - -7,8

・Save / Open - - -- - -9

・General - - - - - - - - 10

・Warp - - - - - - - - - - 11,12

・Edge Blending - - - -13,14

・Black Level - - - - - - 15,16,17

Preparation

1. Connection

Connect an RJ45 cable to Ethernet port on the projector and

the PC (Laptop).

LAN Port 102

2-1. Projector

OSD menu : SETUP >Communications> LAN

DHCP : OFF (direct connection) / ON (Multi connections)

IP Address :

Subnet Mask :

Default Gateway :

2-2. Select the Apply→YES to confirm the settings, and then

wait until finished.

<NOTE>

When a DHCP server exists in the connected network, it assigns an IP address to

the projector and the computer automatically.

If DHCP server does not exists, set up IP Address, Subnet Mask and Default Gateway

manually.

DHCP : Please check with the network administrator.

Do not need to change.

3-1. PC (Laptop)

Start > Control Panel > Network and Internet

3-2. Right-click on Local Area Connection, and select 【Properties 】.

3-3. In the Properties window, select the Networking tab, and

select 【Internet Protocol Version 4 (TCP/IPv4 ) 】.

3-4. Select 【Properties 】.

3-5. Select and following the projector IP address.

Change the any numbers

from Projector’s LAN

information.

Same as

Projector’s LAN

information

Operation

This AP provides three major functions including

【Warp 】【 Edge Blending 】and 【Black Level 】.

・Old version AP needs to be removed before install the new one.

・This function makes user be able to operate a single projector.

Connecting Setting

1: Select 【File】→【New Multi-Function】.

2：Select Resolution

3：Input IP Address and press [Connect].

4：Connection is successful, icon will be changed from to

Delete Connecting projector

1：Select Icon

2：[Edit][Delete]

3：Disappear the selected Icon

Save / Open

Open

1: Select [File][Open]

2: Select directory and file.

3: Edit IP address and connect to the projector.

4: Click [Reconfigure]to load the settings.

Save

1: Select [File][Save]

2: Select directory and edit the file name.

<NOTE>

[Configure] button is not available after selected【Warp 】【 Edge Blending 】or

【Black Level 】tabs, need to start over “Open” again.

【General 】

Projector Output Resolution (Default: WUXGA)

・Select the native resolution of the projector.

Connect Setting (Default: 192.168.0.100)

・Connect to the shown IP address.

Function Settings

・Reset All:

Reset all settings to default value.

This function is not available after pressed the 【Warp 】【Edge Blending 】or

【Black Level 】.

・Reconfigure:

It can apply saved settings from AP to projector.

The button will enable after opening a saved file and connecting to the projector

by AP.

Otros manuales para EK-620U

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Proyector de Eiki

Eiki

Eiki XGA "Diamond" Series LC-XD25 Manual de usuario

Eiki

Eiki DLP EIP-4200 Manual de usuario

Eiki

Eiki QXXAVC922---P Manual de usuario

Eiki

Eiki LC-XSP2600 Manual de usuario

Eiki

Eiki LC-HDT700 Manual de usuario

Eiki

Eiki LC-XGA980U Guía de configuración

Eiki

Eiki Projector Manual de usuario

Eiki

Eiki LC-WB100 Manual de usuario

Eiki

Eiki EIP-1000T Manual de usuario

Eiki

Eiki LC-4000 Guía de configuración

Eiki

Eiki EX-5000 Manual de usuario

Eiki

Eiki LC-XT6 Manual de usuario

Eiki

Eiki EIP-D450 Manual de usuario

Eiki

Eiki EK-510U Manual de usuario

Eiki

Eiki PLC-XU101 Manual de usuario

Eiki

Eiki LC-XB21B Manual de usuario

Eiki

Eiki LC-XT1 Guía de configuración

Eiki

Eiki Conference LC-WUL100 Manual de usuario

Eiki

Eiki EK-820U series Manual de usuario

Eiki

Eiki EIP-UJT100 Manual de usuario

Eiki

Eiki LC-XGA970UE Guía de configuración

Eiki

Eiki LC-XG110 Guía de configuración

Eiki

Eiki EIP-WX5000 Manual de usuario

Eiki

Eiki LC-XIP2600 Manual de instalación y operación

Manuales populares de Proyector de otras marcas

iEmmet

iEmmet MP-312 Manual de usuario

Epson

Epson VS400 Manual de usuario

Sony

Sony VPL-HS10 Marketing Specifications & Features Manual de usuario

Sony

Sony VPL-HW65ES Manual de servicio

Toshiba

Toshiba TLP-791U Manual de usuario

Philips

Philips LC1341 Guía de referencia

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manual de usuario

NEC

NEC NP600S EDU Manual de usuario

BenQ

BenQ SH753P Manual de usuario

Epson

Epson PowerLite Pro Cinema 6020UB Manual de usuario

Epson

Epson PowerLite Home Cinema 705HD Manual de usuario

Christie

Christie LHD700 Manual de usuario

Navitar

Navitar FX Manual de usuario

InFocus

InFocus LitePro 560 Manual de usuario

Sony

Sony SRX-R815P Manual de usuario

Vivitar

Vivitar DP1500 X Manual de usuario

Acer

Acer C20 Series Manual de usuario

Asus

Asus ZenBeam Latte Manual de usuario