To activate the correct channel frequency plan, select the country or
region where the Pro ler Revolution is situated. Rotate to select and
con rm by tapping the rotary button.
The default setting is Europe. The Pro ler Revolution is also
operational in the following countries/regions: Australia, Brazil,
China, Hongkong, Italia, New-Zealand, Russia, South Africa, UK and
USA.
All the following menu items can be accessed without the reset procedure.
Push the rotary button for 2 seconds to access the menu
INPUT SETTINGS
DISPLAY READOUT EXPLANATION
Tap the rotary button to enter the INPUT FM menu. Rotate the
button to navigate through the submenu.
To lter and amplify an FM signal, tap GAIN, select the gain of the
input FM signal (15 to 35 dB) and tap to con rm.
Remark: DAB should be added via V/U input 1-4.
After INPUT FM is con gured, scroll up to the top of the menu
(INPUT FM), tap the rotary button and scroll right to INPUT V/U 1.
Tap INPUT V/U 1 to enter the menu to con gure input 1.
Rotate the rotary button to scroll down in the submenu of INPUT
V/U 1.
PRE-AMPLI: The internal ampli er is by default ON, only in case of
very strong incoming signals (if the strongest channel on that input
is higher than 80dBµV), it can be advised to switch this OFF.
DC: Decide whether the input should provide power to an external
amplifier. Choose between OFF or 12 V.
Remark: If the external ampli er needs 24 V, you can change this in
advanced settings (see further).
P.6
DISPLAY READOUT EXPLANATION
