Eight TouchOne G3 Manual de usuario

Page 1 of 12

TouchOne G3 - Installation and User Manual

Introduction

Welcome to the next generation of centralised control for the smart technology around you!

TouchOne G3 features a best in class 64-bit CPU for blazing fast performance, paired with our best in class smooth capacitive touch

panel, and gorgeous 7” HD IPS display. TouchOne G3 is available in 3 colour options to perfectly blend into your environment.

In The Box

Installation Requirements and Preparation

Page 2 of 12

Installation Requirements and Preparation

Power Supply

TouchOne G3 requires a 12V-14V 15W power supply (measured at the end of line) for smooth operation. Certified compatible power

supplies include:

Mean Well GE18I12-P1J Plug Pack (used in the 8PS-PP18xx-1x power supply kit)

Mean Well APV-16-12 / APV-16E-12 Power Supply (used in the 8PS-IW15-1x power supply kit)

TouchOne PoE Power Only Adaptor (Used in 8PS-POE25-1x power supply kit)

TouchOne PoE Power and Data Adaptor (8PS-POED-1x)

For an updated list, please visit http://mytouchone.com/g3-power

Wire Harness

TouchOne G3 includes a 4-wire wire harness for connection to power and data (either via a suitable connector or soldering). Power

requirements are listed in the Power Supply section above. The 2-wire data connection is for Certified compatible control systems.

TouchOne Certified compatible power supplies (8PS-PP18xx-1x or 8PS-POE25) include a different wire harness for a tool-less plug-

and-play connection.

Orientation

TouchOne can be mounted in either Landscape or Portrait orientation to provide the best user experience for the applications you will

be using.

Hardware Installation

Step 1 - Install Power Supply

The selected power supply should be installed as per the included instructions. For safety, make sure the power supply is turned off

during the installation process. If you are using the TouchOne Barrel Jack Adaptor, it’s recommended to cable tie the power supply

wire and the barrel jack wire together to ensure they don’t become disconnected during installation.

Some applications will only support one orientation so it’s important to check the orientation compatibility of the apps you

want to use before screwing TouchOne to the wall.

Page 3 of 12

Step 2 - Mark and Drill Holes

Hold the included Wall Mount onto the wall in either Portrait or Landscape, using a spirit level to ensure the mount is level. Mark two

screw holes and the wire cutout using a pencil.

For mounting to plasterboard: Drill two 2.5mm (7/64 inch) pilot holes.

For mounting to masonry: Drill two 6mm (1/4 inch) holes for the included wall anchors.

If the wire is being fed through the wall, drill an appropriately sized hole (at least 20mm or 3/4 inch) in the wire cutout for the wire to

come through.

Step 3 - Screw Mount to Wall

Using the included screws, screw the Wall Mount to the wall. Double check for level when tightening the screws.

Step 4 - Wire and Connect to Power

Bring the power supply wire through the wire cutout and connect to the back of TouchOne.

If mounting to a standard flush box, use the appropriate screw holes for the flush box. 6-32 UNC flush box screws can be used

with the Wall Mount instead of the included screws.

Page 4 of 12

Step 5 - Mount TouchOne

Feed the wire back into the wall and mount TouchOne onto the Wall Mount. Slide TouchOne in the opposite direction of the camera

until you feel a click.

Once you apply power to the power supply, TouchOne will boot automatically. In a successful installation, you’ll see the TouchOne

logo within 3 seconds of applying power.

Software Setup

Step 1 - Connect to Wi-Fi

Page 5 of 12

Step 2 - Update eightOS

Installing Apps

TouchOne G3 runs most Android 10 compatible applications. In order to ensure compatibility of the application, apps are certified by

eight. You can install new apps with the following methods:

Pre-Loaded Apps - A number of applications are pre-loaded on TouchOne G3 and can be installed in the Apps section of the settings

menu. The list of pre-loaded apps differs depending on your product distributor.

SD Card - New apps can be installed via SD Card. You can download an app file from our Knowledge Base at

http://mytouchone.com/g3-apps

The ability to download new apps on the device from the internet will be released on a later version of eightOS 3.

Home Screen

Page 6 of 12

The Home screen is the first screen you will see when TouchOne turns on. Home screen functions are:

Device Name Customise your device name in the Settings Menu. Select About and then tap Device name.

Current Time Shows the current time in 12-hour format. Time can be adjusted in the Settings Menu, then tap

Date & time.

Settings Button Opens the Settings Menu.

App Drawer Shows the currently installed third party applications.

Bottom Bar Back Button:

Goes back one screen on the app that is open.

Home Button:

Takes you back to the Home screen from any app.

Quick Actions Menu Button:

Opens the Quick Actions Menu to quickly adjust volume and

brightness and perform a limited number of quick actions from

any app.

Quick Actions Menu

The Quick Actions Menu lets you quickly adjust critical settings for TouchOne from any application. It’s launched by touching the

Quick Actions Menu button in the bottom right hand corner.

Page 7 of 12

Restarting TouchOne

Step 1 - Open the Quick Actions Menu

Step 2 - Tap “Restart Touchscreen”

Settings Screen

Page 8 of 12

Wi-Fi Connect & disconnect to Wi-Fi networks. Configure networks with a static IP or alternative DNS

settings. View IP Address information.

Bluetooth Pair and connect Bluetooth devices. Commonly used to connect TouchOne to a Bluetooth speaker

system or audio adaptor for music control.

Apps View the list of third-party applications and install / uninstall these apps. More apps will

automatically appear in this list when an SD Card is inserted, with apps provided by the

manufacturer in SFZ/SDZ format.

Display Configure display brightness, sleep and device orientation settings.

Sound Adjust volume and other sounds settings.

Date & time Set the date and time, automatic network provided time, time zone and format.

About TouchOne View the device serial number and various version information. Open source license information

can also be found here.

Primary and Kiosk Apps

Primary Apps

A Primary App is an app that automatically starts when TouchOne is started and can also be configured to automatically re-open after

a configurable amount of time. An app that is configured to be the primary app is identified by the “Primary App” icon in the App

Library list.

Page 9 of 12

Configuring a Primary App

Kiosk Apps

A Kiosk App locks down TouchOne to only be able to use that app. When TouchOne is started, the Kiosk App is automatically

Page 10 of 12

A Kiosk App locks down TouchOne to only be able to use that app. When TouchOne is started, the Kiosk App is automatically

launched and the user cannot exit the Kiosk App without entering a PIN code. The home button is hidden in this mode.

Configuring a Kiosk App

Tabla de contenidos

Manuales populares de Panel de control de otras marcas

RDZ

RDZ PC-HRX Manual de usuario

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manual técnico

Efka

Efka Variocontrol V810 Manual de usuario

Cebora

Cebora 208-10 Manual de usuario

AMX

AMX AutoPatch CP-15 Manual de usuario

Satel

Satel CA-6 KLED-S Manual de usuario

Evolution

Evolution IQ plus 800 Manual de usuario

Fagor

Fagor 8040 TCO CNC Manual de usuario

Trane

Trane ComfortLink II XL950 Control Manual de usuario

AKO

AKO PROCool AKO-17635-2 Manual de usuario

ABB

ABB 6136/30M-101 Manual de usuario

Telikou

Telikou BK-603 Belt Pack Manual de usuario

Mapei

Mapei Mapeheat Thermo Touch Manual de usuario

Bosch

Bosch D9412GV4 Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manual de usuario

Sminn

Sminn BOX L VF1L EI Manual de usuario

Balboa

Balboa TP600 Manual de usuario

Nice

Nice HSCU1 Especificaciones técnicas