EGO HTX5300-PA Manual de usuario
MNL_EGO_HTX5300-PA_AV01.01_230608
WARNING: To reduce the risk of injury, the user must read and understand the
Operator’s Manual before using this product. Save these instructions for future reference.
COMMERCIAL
OPERATOR’S MANUAL
56 VOLT LITHIUM-ION COMMERCIAL
CORDLESS ARTICULATING
POLE HEDGE TRIMMER
MODEL NUMBER HTX5300-PA
Wing Nut
Quick-release Lever
B3
B1 B2
B4
SPEED
A
11. Battery-release Button
9. Rear Handle
13. Lock-off Lever
14. Shoulder Strap Loop
15. Auxiliary Handle
4. Front
Handle
16. Hand
Guard
17. Shaft
3. Detent
2. Blade-angle Handle
1. Release Lever
23. Shoulder
Strap
8. Speed Mode Button
7. Bluetooth®Indicator
5. Battery-status
Indicator
18. Blade Support
19. Tip Protector
6. Speed Indicator
21. Hex Key
22. Blade
Sheath 10. Latch
20. Blade
12. Trigger Switch
Wing Nut
Clamping Block
Quick-release Lever
Auxiliary
Handle
Mounting Zone
Mounting Zone
2
1
Clamping Block
Auxiliary Handle
Front Handle
2
1
Shoulder
Strap Loop
Cutting Position
Hand Guard
Support Block
Tip Protector
Storage Position 2
1
C3 D1
C1
D3
C2
2
1
D2
Locking Pin
Blade-angle Handle
Detent
Release Lever
1
2
E
-90°
-15°
-30°
-45°
-60°
-75°
+45°
+30°
+15°
0°
G2
F G1
H1
Front Handle
Auxiliary Handle
L
H2
M2
J
M1
1
2
N
SPEED
K
Speed
Indicator
Battery-
Status
Indicator
Speed Mode
Button
Bluetooth®
Indicator
P1 P2
R
S
Cutting Head Assembly
Power Head Assembly
Cutting Head Assembly
#2
#1
#3
#5
#4
Q
56 VOLT LITHIUM-ION COMMERCIAL CORDLESS ARTICULATING POLE HEDGE TRIMMER — HTX5300-PA 7
READ ALL INSTRUCTIONS!
READ OPERATOR’S MANUAL
Residual risk! People with electronic devices, such
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING: To ensure safety and reliability, all
repairs and replacements should be performed by a
qualied service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention
and understanding. The symbol warnings do not, by
themselves, eliminate any danger.
The instructions and warnings they give are no substitutes
for proper accident prevention measures.
WARNING: Be sure to read and understand all safety
instructions in this Operator’s Manual, including all safety
alert symbols such as “DANGER,” “WARNING,” and
“CAUTION” before using this product. Failure to follow all
instructions listed below may result in electric shock, re,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER,
WARNING, or CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING:
The operation of any machines can result
in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool
operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed.
We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields.
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate it.
Safety Alert Indicates a potential
personal injury hazard.
Read Operator's
Manual
To reduce the risk of
injury, user must read the
operator’s manual.
Wear Eye
Protection
Always wear safety goggles
or safety glasses with side
shields and a full face
shield when operating this
product.
Wear Head
Protection
Wear an approved safety
hard hat to protect your
head.
Danger- Keep
Hands Away from
Blades
Contact with blade will
result in serious personal
injury.
Keep sufcient
distance away
from electrical
power lines
To prevent electrocution,
do not operate within 15
m of overhead electrical
lines. Contact with or use
near power lines may cause
serious injury or electric
shock resulting in death.
XX
Noise Guaranteed sound power
level.
WEEE
Waste electrical products
should not be disposed of
with household waste. Take
to an authorized recycler.
IPX5
Ingress
Protection (IP)
Rating
Protected against water jets
n0No Load Speed Rotational speed, at no load
V Volt Voltage
Direct Current
(DC)
Type or a characteristic of
current
.../min Per Minute Revolutions per minute
mm Millimeter Length or size
kg Kilogram Weight
°C Degrees Celsius Temperature
56 VOLT LITHIUM-ION COMMERCIAL CORDLESS ARTICULATING POLE HEDGE TRIMMER — HTX5300-PA8
GENERAL BATTERY-OPERATED MACHINE
SAFETY WARNINGS
WARNING: Read all safety warnings,
instructions, illustrations and specications provided
with this machine. Failure to follow all instructions listed
below may result in electric shock, re and/or serious
injury.
Save all warnings and instructions for future reference.
The term “machine” in the warnings refers to your mains-
operated (corded) machine or battery-operated (cordless)
machine.
WORK AREA SAFETY
◾Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
◾Do not operate machines in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust. Machines create
sparks which may ignite the dust or fumes.
◾Keep children and bystanders away while
operating a machine. Distractions can cause you to
lose control.
ELECTRICAL SAFETY
◾Machine plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) machines.
Unmodied plugs and matching outlets will reduce risk
of electric shock.
◾Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
◾Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
◾Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the machine. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
◾When operating a machine outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
◾If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
PERSONAL SAFETY
◾Stay alert, watch what you are doing and use
common sense when operating a machine. Do
not use a machine while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating machines may
result in serious personal injury.
◾Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
◾Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the machine. Carrying machines with your nger
on the switch or energizing machines that have the
switch on invites accidents.
◾Remove any adjusting key or wrench before
turning the machine on. A wrench or a key left
attached to a rotating part of the machine may result
in personal injury.
◾Do not overreach. Keep proper footing and balance
at all times. This enables better control of the
machine in unexpected situations.
◾Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair can
be caught in moving parts.
◾If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
◾Do not let familiarity gained from frequent use of
machines allow you to become complacent and
ignore machine safety principles. A careless action
can cause severe injury within a fraction of a second.
MACHINE USE AND CARE
◾Do not force the machine. Use the correct machine
for your application. The correct machine will do
the job better and safer at the rate for which it was
designed.
◾Do not use the machine if the switch does not turn
it on and off. Any machine that cannot be controlled
with the switch is dangerous and must be repaired.
◾Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the machine before making any adjustments,
56 VOLT LITHIUM-ION COMMERCIAL CORDLESS ARTICULATING POLE HEDGE TRIMMER — HTX5300-PA 9
changing accessories, or storing machines. Such
preventive safety measures reduce the risk of starting
the machine accidentally.
◾Store idle machines out of the reach of children
and do not allow persons unfamiliar with the
machine or these instructions to operate the
machine. Machines are dangerous in the hands of
untrained users.
◾Maintain machines and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect
the machine’s operation. If damaged, have the
machine repaired before use. Many accidents are
caused by poorly maintained machines.
◾Keep cutting machines sharp and clean. Properly
maintained cutting machines with sharp cutting edges
are less likely to bind and are easier to control.
◾Use the machine, accessories and machine bits
etc. in accordance with these instructions, taking
into account the working conditions and the work
to be performed. Use of the machine for operations
different from those intended could result in a
hazardous situation.
◾Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the machine in unexpected situations.
BATTERY MACHINE USE AND CARE
◾Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
◾Use machines only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
◾When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a re.
◾Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, ush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
◾Do not use a battery pack or machine that is
damaged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
◾Do not expose a battery pack or machine to
re or excessive temperature. Exposure to re or
temperature above 130 °C may cause explosion.
◾Follow all charging instructions and do not
charge the battery pack or machine outside the
temperature range specied in the instructions.
Charging improperly or at temperatures outside the
specied range may damage the battery and increase
the risk of re.
SERVICE
◾Have your machine serviced by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the machine is
maintained.
◾Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
HEDGE TRIMMER SAFETY WARNINGS
◾Do not use the hedge trimmer in bad weather
conditions, especially when there is a risk of
lightning. This decreases the risk of being struck by
lightning.
◾Keep all power cords and cables away from
cutting area. Power cords or cables may be hidden
in hedges or bushes and can be accidentally cut by
the blade.
◾Hold the hedge trimmer by insulated gripping
surfaces only, because the blade may contact
hidden wiring. Blades contacting a “live” wire may
make exposed metal parts of the hedge trimmer “live”
and could give the operator an electric shock.
◾Keep all parts of the body away from the blade. Do
not remove cut material or hold material to be cut
when blades are moving. Blades continue to move
after the switch is turned off. A moment of inattention
while operating the hedge trimmer may result in
serious personal injury.
◾When clearing jammed material or servicing the
unit, make sure all power switches are off and
the battery pack is removed or disconnected.
Unexpected actuation of the hedge trimmer while
clearing jammed material or servicing may result in
serious personal injury.
◾Carry the hedge trimmer by the handle with the
blade stopped and taking care not to operate any
power switch. Proper carrying of the hedge trimmer
will decrease the risk of inadvertent starting and
resultant personal injury from the blades.
56 VOLT LITHIUM-ION COMMERCIAL CORDLESS ARTICULATING POLE HEDGE TRIMMER — HTX5300-PA10
◾When transporting or storing the hedge trimmer,
always t the blade cover. Proper handling of the
hedge trimmer will decrease the risk of personal injury
from the blades.
◾Operate thehedge trimmerat ground level only. Do
not operate on ladders or any other unstable support.
SAFETY INSTRUCTIONS FOR EXTENDED-REACH
HEDGE TRIMMER
◾Always use head protection when operating the
extended-reach hedge trimmer overhead. Falling
debris can result in serious personal injury.
◾Always use two hands when operating the
extended-reach hedge trimmer. Hold the extended-
reach hedge trimmer with both hands to avoid loss of
control.
◾To reduce the risk of electrocution, never use the
extended-reach hedge trimmer near any electrical
power lines. Contact with or use near power lines
may cause serious injury or electric shock resulting
in death.
IMPORTANT SAFETY INSTRUCTIONS
◾Do not charge the battery pack in rain or in wet
locations.
◾Use only with the battery packs and chargers
listed below:
BATTERY PACK CHARGER
BA1400, BA1400T, BA2800,
BA2800T, BA4200, BA4200T,
BA5600T, BA6720T
CH2100E, CH5500E,
CH7000E
BAX1501 CHX5500
◾Do not grasp the exposed cutting blades or cutting
edges when picking up or holding the hedge
trimmer.
◾Do not use on a ladder, rooftop, tree, or other
unstable support. Stable footing on a solid surface
enables better control of the hedge trimmer in
unexpected situations.
◾Never allow children to operate the hedge trimmer.
◾Never remove or tamper with safety devices.
Check their proper operation regularly. Never do
anything to interfere with the intended function
of a safety device or to reduce the protection
provided by a safety device.
◾Never operate the hedge trimmer without proper
guards, plates, or other safety protective devices
in place.
◾Check damaged parts before further use of the
hedge trimmer. A guard or other part that is
damaged should be carefully checked to determine
that it will operate properly and perform its
intended function. Check for alignment of moving
parts, binding of moving parts, breakage of parts,
mounting, and any other condition that may affect
its operation. A guard or other part that is damaged
should be properly repaired or replaced by an
authorized service center unless indicated elsewhere
in this manual.
◾Check the blade and motor mounting bolts at
frequent intervals for proper tightness. Also,
visually inspect blade for damage (e.g., bent,
cracked, and worn). Replace the blade only with
an EGO™ blade.An unbalanced blade causes
vibration that could damage the motor drive
unit or cause personal injury.
◾Replace the blade if it is bent or cracked. An
unbalanced blade causes vibration that could damage
the motor drive unit or cause personal injury.
◾If the equipment should start to vibrate abnormally,
stop the motor and check immediately for the
cause. Vibration is generally a warning of trouble.
◾The hedge trimmer shall be used to cut stems less
than 28 mm thick.
◾Trim only in daylight or in good articial light.
◾Remove or disconnect battery before servicing,
cleaning, or removing material from the hedge
trimmer.
◾Do not wash with a hose; avoid getting water in
motor and electrical connections.
◾When servicing use only identical replacement
parts listed in this manual. Use of parts which do not
meet the original equipment specications may lead to
improper performance and compromised safety.
◾Do not incinerate the machine even if it is severely
damaged. The batteries can explode in a re.
◾Follow instructions for lubricating and changing
accessories.
◾Keep handles dry, clean and free from oil and
grease.
◾Check the hedges and bushes for foreign objects,
e.g. wire fences and hidden wiring before
operating the machine.
Tabla de contenidos
Otros manuales de Recortadora de EGO
EGO
EGO HTA2000 Manual de usuario
EGO
EGO ST1500 Manual de usuario
EGO
EGO ST1530-FC Manual de usuario
EGO
EGO HTX5310-P Manual de usuario
EGO
EGO STA1500 Manual de usuario
EGO
EGO STA1500 Manual de usuario
EGO
EGO HT2410 Manual de usuario
EGO
EGO HTA2000 Manual de usuario
EGO
EGO POWER+ ST1200 Manual de usuario
EGO
EGO HT5100E Manual de usuario
EGO
EGO ST1520 Manual de usuario
EGO
EGO HT2400E Manual de usuario
EGO
EGO Power+ ST1301E-S Manual de usuario
EGO
EGO HTA2000 Manual de usuario
EGO
EGO Power ST1500E-F Manual de usuario
EGO
EGO ST1620T Manual de usuario
EGO
EGO Power+ ST1511E Manual de usuario
EGO
EGO HT2401E Manual de usuario
EGO
EGO ST1510E Manual de usuario
EGO
EGO HT2600E Manual de usuario
