Ego Power+ HT2400 Manual de usuario

WARNING: To reduce the risk of injury, the user must read and understand the

Operator’s Manual before using this product. Save these instructions for future reference.

OPERATOR'S MANUAL

56-VOLT

LITHIUM-ION

CORDLESS

HEDGE TRIMMER

MODEL NUMBER HT2400

Español p. 55

Français p. 27

14-1107_EGO_HT2400_HedgeTrimmer_manual_NA_V1

56V LITHIUM-ION CORDLESS HEDGE TRIMMER2

TABLE OF CONTENTS

Safety Symbols ..........................................4

Safety Instructions.....................................5-11

Introduction ............................................12

Speciﬁcations ..........................................12

Assembly..............................................13

Packing List ............................................13

Description .........................................14-15

Operation...........................................15-20

Maintenance ........................................20-22

Troubleshooting.........................................23

Warranty ...........................................24-25

Parts List ..............................................26

56V LITHIUM-ION CORDLESS HEDGE TRIMMER 3

READ ALL INSTRUCTIONS!

WARNING: Some dust created by power cutting contains chemicals known to

the state of California to cause cancer, birth defects or other reproductive harm. Some

examples of these chemicals are:

 Lead from lead-based paints

 Crystalline silica from bricks and cement and other masonry products, and

 Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of

work. To reduce your exposure to these chemical: work in a well-ventilated area, and

work with approved safety equipment, such as those dust masks that are specially

designed to ﬁlter out microscopic particles.

56V LITHIUM-ION CORDLESS HEDGE TRIMMER4

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The

safety symbols and the explanations with them deserve your careful attention and

understanding. The symbol warnings do not, by themselves, eliminate any danger. The

instructions and warnings they give are no substitutes for proper accident prevention

measures.

WARNING: Be sure to read and understand all safety instructions in this

Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,”

and “CAUTION” before using this tool. Failure to following all instructions listed below

may result in electric shock, ﬁre, and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION.

May be used in conjunction with other symbols or pictographs.

WARNING! The operation of any power tools can result in foreign objects being

thrown into your eyes, which can result in severe eye damage. Before beginning power

tool operation, always wear safety goggles or safety glasses with side shield and a

full face shield when needed. We recommend a Wide Vision Safety Mask for use over

eyeglasses or standard safety glasses with side shields. Always use eye protection

which is marked to comply with ANSI Z87.1.

56V LITHIUM-ION CORDLESS HEDGE TRIMMER 5

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may appear on this product. Read,

understand, and follow all instructions on the machine before attempting to assemble

and operate.

Safety Alert Indicates a potential personal injury hazard.

Read the

Operator’s

Manual

To reduce the risk of injury, user must read

operator’s manual.

Eye Protection

Always wear safety goggles or safety glasses

with side shields and a full face shield when

operating this product.

Danger- Keep

Hands Away

from Blades

Contact with blade will result in serious

personal injury.

Recycle Symbols

This product uses lithium-ion (Li-ion)

batteries. Local, state, or federal laws may

prohibit disposal of batteries in ordinary

trash. Consult your local waste authority for

information regarding available recycling and/

or disposal options.

IPX4

Ingress

Protection

Degree

Protection from splashing water

VVolt Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

56V LITHIUM-ION CORDLESS HEDGE TRIMMER6

WWatt Power

min Minutes Time

Alternating

Current Type of current

Direct Current Type or a characteristic of current

n0No-Load Speed Rotational speed, at no load

... /min Per Minute Revolutions per minute

SPM Strokes Per

Minute Stroke speed, at no load

DANGER: People with electronic devices, such as pacemakers, should consult

their physician(s) before using this product. Operation of electrical equipment in close

proximity to a heart pacemaker could cause interference or failure of the pacemaker.

56V LITHIUM-ION CORDLESS HEDGE TRIMMER 7

GENERAL POWER TOOL SAFETY WARNINGS

WARNING: Read all safety warnings and instructions. Fail to follow the

warnings and instructions may result in electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warning refers to your mains-operated (corded) power tool

or battery-operated (cordless) power tool.

WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power tools create sparks which may ignite the

dust or fumes.

Keep children and bystanders away while operating a power tool. Distractions can

cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way. Do not

use any adapter plugs with earthed (grounded) power tools. Unmodiﬁed plugs and

matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your body is

earthed or grounded.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging

the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an extension cord suitable for outdoor

use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is unavoidable, use a GFCI protected

supply. Use of a GFCI reduces the risk of electric shock.

56V LITHIUM-ION CORDLESS HEDGE TRIMMER8

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the inﬂuence of

drugs, alcohol or medication. A moment of inattention while operating power tools

may result in serious personal injury.

Use personal protective equipment. Always wear eye protection. Protective

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal injuries.

Prevent unintentional starting. Ensure the switch is in the off-position before

connecting to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools with your ﬁnger on the switch or energizing power tools that

have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. A wrench or

a key left attached to a rotating part of the power tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewelry or long hair can be caught

in moving parts.

If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust devices can

reduce dust-related hazards.

POWER TOOL USE AND CARE

Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and more safely at the rate for

which it was designed.

Do not use the power tool if the switch does not turn it on and off. Any power tool

that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/or the battery pack from the

power tool before making any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the risk of starting the power

tool accidentally.

56V LITHIUM-ION CORDLESS HEDGE TRIMMER 9

Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tools

operation. If damaged, have the power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control;

Use the power tool, accessories, tool bits, etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those intended could

result in a hazardous situation.

BATTERY TOOL USE AND CARE

Recharge only with the charger speciﬁed by the manufacturer. A charger that

is suitable for one type of battery pack may create a risk of ﬁre when used with

another battery pack.

Use power tools only with speciﬁcally designated battery packs. Use of any other

battery packs may create a risk of injury and ﬁre.

When battery pack is not in use, keep it away from other metal objects, like paper

clips, coins, keys, nails, screws or other small metal objects that can make a

connection from one terminal to another. Shorting the battery terminals together

may cause burns or a ﬁre.

Under abusive conditions, liquid may be ejected from the battery; avoid contact.

If contact accidentally occurs, ﬂush with water. If liquid contact eyes, additionally

seek medical help. Liquid ejected from the battery may cause irritation or burns.

SERVICE

Have your power tool serviced by a qualiﬁed repair person using only

identical replacement parts. This will ensure that the safety of the power

tool is maintained.

56V LITHIUM-ION CORDLESS HEDGE TRIMMER10

HEDGE TRIMMER SAFETY WARNINGS

DANGER – Keep hands away from blade. Contact with blade will result in

serious personal injury.

Keep all parts of the body away from the cutter blade. Do not remove cut material

or hold material to be cut when blades are moving. Make sure the switch is off

when clearing jammed material. Blades coast after turn off.

A moment of inattention while operating the hedge trimmer may result in serious

personal injury.

Carry the hedge trimmer by the handle with the cutter blade stopped. Proper handling

of the hedge trimmer will reduce possible personal injury from the cutter blades.

Hold the power tool by insulated gripping surfaces only, because the cutter

blade may contact hidden wiring. Cutter blades contacting a “live” wire may

make exposed metal parts of the power tool “live” and could give the operator

an electric shock.

Use both hands when operating the hedge trimmer. Using one hand could

cause loss of control and result in serious personal injury.

IMPORTANT SAFETY INSTRUCTIONS

Do not charge the battery pack in rain or in wet locations.

Use only with the battery packs and chargers listed below:

BATTERY CHARGER

BA1120, BA1400, BA2240

BA2800, BA4200

CH5500

CH2100

Do not grasp the exposed cutting blades or cutting edges when picking up or holding

the hedge trimmer.

Do not use on a ladder, rooftop, tree, or other unstable support. Stable footing on a

solid surface enables better control of the hedge trimmer in unexpected situations.

Never allow children to operate the hedge trimmer.

Never remove or tamper with safety devices. Check their proper operation regularly.

Never do anything to interfere with the intended function of a safety device or to

reduce the protection provided by a safety device.

Tabla de contenidos

Idiomas:

Otros manuales de Recortadora de Ego Power+

Ego Power+

Ego Power+ STX3800 Manual de usuario

Ego Power+

Ego Power+ HT2600 Manual de usuario

Ego Power+

Ego Power+ HT5100E Manual de usuario

Ego Power+

Ego Power+ STA1600 Manual de usuario

Ego Power+

Ego Power+ HT2500 Manual de usuario

Ego Power+

Ego Power+ PPX1000 Manual de usuario

Ego Power+

Ego Power+ ST1620E-T Manual de usuario

Ego Power+

Ego Power+ HT2401E Manual de usuario

Ego Power+

Ego Power+ STA1500 Manual de usuario

Ego Power+

Ego Power+ ST1300E-S Manual de usuario

Ego Power+

Ego Power+ HTX6500/4215 Manual de usuario

Ego Power+

Ego Power+ ST1500E-F Manual de usuario

Ego Power+

Ego Power+ HTA2000 Manual de usuario

Ego Power+

Ego Power+ STA1500 Manual de usuario

Ego Power+

Ego Power+ STX3800 Manual de usuario

Ego Power+

Ego Power+ STA1600 Manual de usuario

Ego Power+

Ego Power+ HT2600E Manual de usuario

Ego Power+

Ego Power+ ST1520 Manual de usuario

Ego Power+

Ego Power+ HT2410E Manual de usuario

Ego Power+

Ego Power+ HT2600-FC Manual de usuario

Ego Power+

Ego Power+ ST1400E-ST Manual de usuario

Ego Power+

Ego Power+ HT2410E Manual de usuario

Ego Power+

Ego Power+ ST1610E-T Manual de usuario

Ego Power+

Ego Power+ HT2400-FC Manual de usuario

Manuales populares de Recortadora de otras marcas

MTD

MTD HT 51 E Manual de usuario

McCulloch

McCulloch T22 LS Manual de usuario

COCKRAFT

COCKRAFT PRO HL36-S Manual de usuario

Grizzly

Grizzly CT 1800 Li Manual de usuario

Peco

Peco Z Trimmer ZT-3000 Manual de usuario

Solo

Solo 116 Manual de usuario

Stiga

Stiga ST 1200 Manual de usuario

Echo

Echo GT-225 - 10-09 Manual de usuario

RedMax

RedMax BT17 Manual de usuario

GreenWorks

GreenWorks STA806 Manual de usuario

Parkside

Parkside PHSL 900 A3 Manual de usuario

Gardeo

Gardeo PRO GPTHT2560 Manual de usuario

Park

Park DT-810870 Manual de usuario

Worx

Worx WG209 Manual de usuario

Gardenline

Gardenline 43671/HTKS26 Manual de usuario

Makita

Makita 3710 Manual de usuario

Champion

Champion 100683 Manual de usuario

Stihl

Stihl FS 311 Manual de usuario