EFA P5V580-AT-C Manual de usuario
_____________________________________________________________
P5V580-AT-C M/B Manual Page 1
P5V580-AT-C
ISA/PCI/IO
Mother Board
User’s Manual
PART NO. M523G0010C Rev 1.0 AUG. 1997
_____________________________________________________________
Page 2P5V580-AT-C M/B Manual
TABLE OF CONTENTS
1. SPECIFICATION .................................................................................. 2
2.
JUMPER SETTING ............................................................................... 3
2.1 Table of Jumper Setting .................................................................... 3
CPU Jumper Setting .......................................................................... 3
Memory Size ...................................................................................... 4
Special Function Jumpers .................................................................. 5
2.2 Chart of Jumper .................................................................................. 6
3.
AWARD BIOS SETUP ........................................................................... 7
3.1 Entering Setup ................................................................................... 7
3.2 The Main Menu ................................................................................. 8
3.3 Standard CMOS Setup Menu ............................................................ 10
3.4 BIOS Features Setup Menu ............................................................... 13
3.5 Chipset Features Setup Menu ........................................................... 16
3.6 Power Management Setup Menu ...................................................... 17
3.7 PNP/PCI Configuration Setup Menu ................................................ 20
3.8 Integrated Peripherals ....................................................................... 22
3.9 Supervisor Password & User Password Setting ................................ 24
3.10 IDE HDD Auto Detection ............................................................... 25
3.11 Power On Boot ................................................................................ 28
3.12 BIOS Reference - POST Message ................................................... 29
_____________________________________________________________
P5V580-AT-C M/B Manual Page 3
1. SPECIFICATIONS
1. P5V580-AT SPECIFICATIONS
CPU CPU Intel Pentium P54C / P54CS / P55C
Cyrix 6x86 / 6x86L / 6x86MX
AMD K5 / K6
CPU Speed P54C : 75/90/100/120/133/150/166/200MHz;
P55C : 166/200/233MHz
System Speed 50/55/60/66/75MHz
BIOS BIOS 128K BIOS; PnP Compliant
BIOS ROM Flash Memory
CACHE Internal (L1) Write Back
External (L2) Pipe-line Burst Write Back SRAM(256K/512K)
MEMORY DRAM Size From 8M up to 256M Bytes
DRAM Module SIMM x 4 for 2 Banks of 72 Pin
DIMM x 1 of 168 Pin for 3.3V Sync. and EDO DRAM
Data Path 64 Bit Wide
On Board I/O I/O Function Local Bus Enchanced Dual-Channel IDE
Bus Master PCI IDE /Mode 4 Support
ECP/EPP Parallel Port
2 Serial Port
IR Function (Optional)
FDD Support
GREEN SYSTEM SMM Control, Stop CPU Clock
VGA Control of DPMS
SLOT Expansion Slot 16 Bit ISA x 4
32 Bit PCI x 3 (3 Master Support)
PCI Bus Fully Synchronous 25/27.5/30/33/37.5MHz PCI Bus
Interface
MEMORY DIMM x 1 + SIMM x 4
Mouse PS/2 Mouse
Keyboard Keyboard CNN AT Keyboard
Others Main Chipset VIA 580VPX CHIPSET
IO Chipset SMC669
PCB Size 220mm x 230mm x 1.6mm, 4 layers
_____________________________________________________________
Page 4P5V580-AT-C M/B Manual
2.JUMPER SETTING
2. JUMPER SETTING
2.1. Table of Jumper Setting
lCPU Voltage Select (* : reserve)
CPU TYPE JP1 JP9
A B C D E
VCORE
* * OFF OFF OFF OFF ON 2.1V
PENTIUM MMX/Cyrix 6x86L 3-5/4-6 OFF ON OFF OFF OFF 2.8V
Cyrix 6x86MX/AMD K6(166-200) 3-5/4-6 OFF ON OFF OFF ON 2.9V
AMD K6(233) 3-5/4-6 OFF ON ON OFF OFF 3.2V
PENTIUM 1-3/2-4 OFF ON ON OFF ON 3.3V
Cyrix 6x86/AMD K5 1-3/2-4 OFF ON ON ON ON 3.5V
lCPU Jumper Setting
INTEL JP6 JP7 JP8 JP2 JP3
75MHz 2-3 2-3 2-3 OFF OFF
90MHz OFF OFF
120MHz 2-3 2-3 1-2 OFF ON
150MHz ON ON
100MHz OFF OFF
133MHz OFF ON
166MHz 2-3 1-2 2-3 ON ON
200MHz ON OFF
233MHz OFF OFF
²If select Cyrix CPU, JP10 must be set ON and select 6x86L-P200+ / 6x86MX-
PR200 75MHz, JP5 must be set 2-3
Cyrix JP6 JP7 JP8 JP2 JP3
6x86-P120+2-3 2-3 2-3
6x86-P133+1-2 2-3 2-3
6x86-P150+2-3 2-3 1-2 OFF ON
6x86/6x86L-P166+2-3 1-2 2-3
6x86L-P200+1-2 2-3 1-2
6x86MX- PR166
60MHz Bus 2.5x 2-3 2-3 1-2 ON ON
6x86MX- PR166
66MHz Bus 2x 2-3 1-2 2-3 OFF ON
6x86MX- PR200
66MHz Bus 2.5x 2-3 1-2 2-3 ON ON
6x86MX- PR200
75MHz Bus 2x 1-2 2-3 1-2 OFF ON
AMD JP6 JP7 JP8 JP2 JP3
K5 -PR75 2-3 2-3 2-3
K5 -PR90 2-3 2-3 1-2
K5 -PR100 2-3 1-2 2-3 OFF OFF
K5 -PR120 2-3 2-3 1-2
K5 -PR133 2-3 1-2 2-3
_____________________________________________________________
P5V580-AT-C M/B Manual Page 5
K5 -PR150 2-3 2-3 1-2 ON ON
K5 -PR166 2-3 1-2 2-3 ON ON
K6-166 2-3 1-2 2-3 ON ON
K6-200 2-3 1-2 2-3 ON OFF
K6-233 2-3 1-2 2-3 OFF OFF
2. JUMPER SETTING
lMemory Size
²168 PIN DIMM & 72 PIN SIMM
Option Type
Bank0/1 8M, 16M, 32M, 64M
Bank2/3 4M/4M,8M/8M,16M/16M,32M/32M,64M/64M
Bank4/5 4M/4M,8M/8M,16M/16M,32M/32M,64M/64M
NOTE :1 > 4M :[ 1Mx(32/36)bit]2
8M :[ 2Mx(32/36)bit]2
16M :[ 4Mx(32/36)bit]2
32M :[ 8Mx(32/36)bit]2
64M :[16Mx(32/36)bit]2
2 > The DRAM interface supports 8Mbytes to 256 Mbytes
3 > For access time SIMM, must use 70us or less.
4 > The DRAM modules installed to the same memory bank
need to be consistent. But the combinations of different
memory size of Bank 1 and Bank 2 are accepted.
5 > Bank 0/1 support 168pin 3.3V Sync. and EDO DRAM.
6 >
Bank 2/3/4/5 support 72 pin 5V EDO and fast page mode
DRAM
_____________________________________________________________
Page 6P5V580-AT-C M/B Manual
2.JUMPER SETTING
lSpecial Function Jumpers
Jumper Number FUNCTION
J1 K/B CONNECTOR
J2 PS/2 MOUSE
J6 IR
COM 1 COM PORT 1
COM 2 COM PORT 2
IDE 1 IDE 1
IDE 2 IDE 2
FDC 1 FDD
LPT 1 PRINT PORT 1
JP4 CMOS CLEAR
J7 MULTIFUNCTION CONNECTOR
lMultifunction Connector
Power LED/Key Lock
Speaker Turbo
LED
Ext_SMI
HDD
LED
Reset
Green
LED
+
++ + + + +
_____________________________________________________________
P5V580-AT-C M/B Manual Page 7
2. JUMPER SETTING
2.2 Chart of jumper
JUMPER OUTLINE
VT
82C587VP
VT
82C587VP 64KX32
64KX32
SMC669
VT
82C586VP
PCI1
PCI2
PCI3
VT
82C585VP
JP5/6/7/8
J7
BIOS
JP4 SL1
SL2
SL3
SL4
LPT1
BANK5
BANK4
BANK3
BANK2
FDD IDE2
IDE1
COM1/2
BANK0/1 JP10
JP3/2/11
JP9
ABCDE
JP1
135
J4
J5
J1
J2
_____________________________________________________________
Page 8P5V580-AT-C M/B Manual
3. AWARD BIOS SETUP
3. AWARD BIOS SETUP
3.1 Entering Setup
Power on the computer and press <Del> immediately to allow you to enter Setup. The other way to
enter Setup is to power on the computer, when the below message appears briefly at the bottom of
the screen during the POST (Power On Self Test), press <Del> key or simultaneously press <Ctrl>,
<Alt>, and <Esc> keys.
TO ENTER SETUP BEFORE BOOT PRESS : <CTRL-ALT-ESC> OR <DEL> KEY
If the message disappears before you respond, restart the system by turning it OFF then ON or
pressing the "RESET" button on the system case. You may also restart by simultaneously pressing
<Ctrl>, <Alt>, and <Delete> keys. If you do not press the keys at the correct time and the system
does not boot, an error message will be displayed and you will again be asked to,
PRESS <F1> TO CONTINUE, <CTRL-ALT-ESC> OR <DEL> TO ENTER SETUP
_____________________________________________________________
P5V580-AT-C M/B Manual Page 9
3.AWARD BIOS SETUP
3.2 The Main Menu
Once you enter Awoard BIOS CMOS Setup Utility, the Main Menu (Figure 1) will appear on the
screen. The Main Menu allows you to select from ten setup functions and two exit choices. Use
arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.
STANDARD CMOS SETUP
This setup page includes all the items in a standard compatible BIOS.
BIOS FEATURES SETUP
This setup page includes all the items of Award special enhanced features.
CHIPSET FEATURES SETUP
This setup page includes all the items of chipset special features.
POWER MANAGEMENT SETUP
This category determines how much power consumption for system after selecting below items.
Default value is Disable.
PNP/PCI CONFIGURATION SETUP
This category specifies the value (in units of PCI bus clocks) of the latency time for this PCI bus
master and the IRQ level for a PCI device.
_____________________________________________________________
Page 10 P5V580-AT-C M/B Manual
3.AWARD BIOS SETUP
LOAD BIOS DEFAULTS
BIOS defaults indicates the most appropriate value of the system parameter which the system would
be in minimum performance.
LOAD SETUP DEFAULTS
Chipset defaults indicates the values required by the system for the maximum performance.
INTEGRATED PERIPHERALS
IDE, FDD, Serial, Parallel port I/O configuration.
SUPERVISOR & USER PASSWORD SETTING
Change, set, or disable password. It allows you to limit access to the system and Setup.
IDE HDD AUTO DETECTION
Automatically configure hard disk parameters.
HDD LOW LEVEL FORMAT
To perform low level format of hard disk drive.
SAVE & EXIT SETUP
Save CMOS value changes to CMOS and exit setup.
EXIT WITHOUT SAVE
Abandon all CMOS value changes and exit setup.
Tabla de contenidos
Otros manuales de Placa madre de EFA
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
