How to Set Up EENOUR Hat Press?
Power On: Long press the power button for 3 seconds to turn it on, and then the hat press
starts to heat and the heating indicator blinks.
Heat Levels Setting: Short press the power button to set the heating level when the hat
press is on. Which light is in blinks indicates the heat level you have set.
Power Off: Long press the power button for 3 seconds to turn it off.
How to Use EENOUR Hat Pressing Form?
1.Fully fill up the hat pressing
form first, it's recommended to use
cotton or cloth.
2.Unfasten the hat and remove its
insert.
3.Fold down the sweatband, and
use both hands to place the hat
over the form.
4.Use the handle to adjust the
form inside the hat until snug.
5.Tightly fasten the hat around the
form, to ensure the pressing
surface is flat and firm.
6.Follow the instructions in
"Steps to Press a Hat" on
page**.
How to Use EENOUR Hat Pressing Base?
1.Unfasten the hat and remove its
insert.
2.Place the pressing part on the
press base.
3.Tuck the rest into the recess of
the press base.
4.Adjust the position of the cap
and base until it fits snugly.
5.Ensure the pressing surface is
flat and firm, and the press base
stable.
6.Follow the instructions in "Steps
to Press a Hat" on page**.
3
