Ednet 87230 Manual de usuario
User Manual
Dash Cam
87230
1. Package Content
Ednet car DVR 1.2m powe
r
cable
Suction mount User manual
Car charge
r
2. Product overview
Knob for lens adjust LCD display
HDMI Port Lens (Led light surround)
USB port Power Button
Function button (Menu/back) SD card slot
Function button (Playback/Up) Charge indicato
r
Function button (Photo/down) Recording indicato
r
Function button (Video/OK) Reset button
147
13
12
6
5
11
10
9
8
4
3
2
1
Getting started
3. Power on/Power off
Position the device in the vehicle using the suction
mount and press the Power button to turn it on. To
power off the device press the button again.
You can also connect the device to the car charger.
It will automatically turn on and start recording when the
car engine starts. When the engine stops, the device will
automatically save the last file and turn off.
4. Language Setting
To switch to other languages you need to do following
steps to change the menu to your language:
Press function button 4 (Menu/back)
Scroll down to page 5/7 and select “Sprache”
Choose your language and press “OK”(Function button 7)
5. Charging
Using the power cable: connect the device to the USB
port of a computer/Laptop
Using the car changer: Connect the device to the car
charger. The device will start charging after the car
engine is turned on. The device will automatically turn on
and start recording. When the engine stops, the device
will automatically save the last file and turn off.
Normally it takes approximately 2-3 hours to fully charge
the device. Operating the device while charging with the
Car Charger may extend the time of full charge.
Note:
Before using the device for the first time, please, connect it
to the PC or notebook using the USB cable provided to
fully charge the battery. The battery is completely charged
in 2-3 hours.
6. Inserting the microSD-card
Please follow the direction of MicroSD card insertion to
the card slot until it is fixed in the SD card slot.
To take out the SD card, please gently push in the SD
card first to retrieve the SD card out from the slot.
Note:
After inserting the microSD card the device will
automatically recognize it as default storage and all
the data will be saved on this card.
Cautions:
When using the SD card please make sure that the SD
card is functional.
Please pay attention to the direction of the SD card
insertion. If reversely inserted, it might damage the
machine and the SD card.
Please use the high speed SD card (SDHC class6
card)
7. Recording
Connect the device to car charger, when the car engine
is turned on after 5 seconds, the device will start loop
video recording. When the car engine stops, the device
will save the last file and turn off after 15 seconds
Notice:
1. Press OK button (Function button 7) on loop video
recording, the current file will be saved and the device
enters to standby mode.
2. When the microSD card is full, the device will
delete the first unlocked video file automatically.
8. Taking pictures
Press the Photo button (Function button 6) to select
the photo mode
Press Photo button (Function button 6) to take photos,
taken photos are saved on microSD Card.
Press the Menu (Function button 7) button in the photo
mode, and then press up/down button to set resolution
and time.
Home screen
9. Main menu
The following symbols may be displayed on the screen:
Menu mode Play back mode
Picture mode Video recording mode
Back Up
Down Ok
Zoom SOS
Mic Pause
Battery Storage card
Settings
10. Video Menu settings
Turn on the device and make sure the Video mode is
selected.
Note:
The appropriate symbol will be displayed in the top left
corner of the screen.
Press Menu button to enter Settings. Press up/down
button to select the option and press OK button to enter
the select mode, press up/down button to select and
press OK again to set the value.
The following options list is available in the Video menu:
Recording Resolution: Select the video image size
from 1080HFD 1920*1080 /1080P 1440*1080 /720P
1280*720(30fps).
Loop recording: Select the loop recording from Off /
1 min. / 2 mins / 3 mins / 5 mins /10 mins
Exposure: Select the exposure from
+2.0,+5/3,+4/3,+1.0,+2/3, +1/3, +0.0, -1/3,-2/3,-1.0,
-4/3,-5/3,-2.0
Motion Detection: In the standby mode, press Menu
button to set the function on, the device will start video
recording automatically if it detects a moving object and
stop recording when there is no movement detected.
Record Audio: Select to turn the record audio on or off
Date Stamp: Select to turn the date stamp on or off.
11. Picture Menu settings
Turn on the device and make sure the Picture mode is
selected.
Note:
The appropriate symbol will be displayed in the top left
corner of the screen.
Press Menu button to enter Settings. Press up/down
button select the option
The following options list is available in the Picture menu:
1. Capture Mode: Select the capture Mode from Single
/2S Timer/ 5S Timer/ 10S Timer
2. Photo size: Select the picture image size from 12M
4032*3024 / 10M 3648*2736 / 8M 3264*2448 / 5M
2592*1944 / 3M 2048*1536 / 2M HD1920*1080
/1.3M 1280*960 / VGA 640*480
3. Quality: Select quality from Fine / Normal / Economy
4. White Balance: Select white balance from Auto /
Daylight / Cloudy / Tungsten / Fluorescent
5. Color: Select color from color/ Black & white / Sepia
6. ISO: Select ISO from Auto/100/200/400
7. Exposure: Select the exposure from
+2.0,+5/3,+4/3,+1.0,+2/3, +1/3, +0.0,-1/3,-2/3,-1.0,
-4/3,-5/3,-2.0
8. Date Stamp: Select to turn date stamp on or off and
set date and time.
12. General settings
Press Menu button to enter Settings, and then press
UP, DOWN, OK button to select Settings. The following
settings are available:
Date/Time : Select the date and time display format,
MM/DD/YY
Auto Power off: Make the device automatic power off
when it is not in use.
Beep Sound: Select to turn beep sound on or off,
Language: Select the desired language from the list.
TV Mode: Select TV mode from PAL / NTSC,
Frequency: Select frequency from 50HZ / 60HZ,
LCD Off: Select to turn LCD on or off.
Format: Select to format the MicroSD Card.
Default Setting: Select if return menu setting
to defaults or not.
Version: Displays the current system version.
13. Playback mode
Press Playback button (Function button 5) to enter
playback mode. The last recorded file will be displayed.
Press the up/down
button to view the files.
Press the OK button to play the files. Meantime, under
play mode, press up/down to FORWARD / BACKWARD
(1/2,1/4,1/8) the file, then press OK button to pause. Press
the Menu button back to the playback menu. To enter
menu options press Menu button, the following settings
are available:
Delete: Select the file / files you want to delete.
Protect: Select the file you want to lock or unlock.
Volume: Select the playback volume.
14. USB connection
To download registered files on your PC/notebook, please,
connect the device to the PC or notebook via USB-cable
provided. After connecting the device to the PC the USB
menu will be displayed, containing Mass Storage and
PC Camera. Select Mass Storage and the device will
appear in “My computer” as the removable disk.
All registered files are stored in DCIM folder, videos are
stored in AVI format, and the pictures are stored in JPG
format. You can now download the files from the device.
15. PC Camera Mode
Connect the device to a computer via USB. It will show
Mass Storage /PC Cam starting up the device, Press
up/down to select and then press OK to enter PC CAM
mode, then you can use the device as a PC Camera.
16. Playback on TV
To playback the recorded files on TV connect the device to
your TV with the HDMI cable (not included in the package)
and follow the TV instructions or refer to your TV user manual.
Safety precautions
Please observe all safety precautions before using ednet
87230. Please follow all procedures outlined in this manual
to correctly operate the device.
Do not attempt to disassemble or alter any part of the
device that is not described in this guide.
Do not place the device in contact with water or any
other liquids. The device is NOT designed to be liquid
proof of any sort.
In the event of liquid entry into interior of device,
immediately disconnect the device from the computer.
Continuing use of the device may result in fire or
electrical shock. Please consult your product distributor
or the closest support center.
To avoid risk of electrical shock, do not connect or
disconnect the device with wet hands.
Do not place the device near a heat source or directly
expose it to flame or heat.
Never place the device in vicinity of equipments
generating strong electromagnetic fields. Exposure to
strong magnetic fields may cause malfunctions or data
corruption and loss.
Tabla de contenidos
Idiomas:
Otros manuales de Cámara de salpicadero de Ednet
