EDL NERVO-SCOPE PRO-X Manual de usuario

Electronic Development Labs, Inc.

The Temperature People® - Since 1943

www.edl-inc.com/product/nervo-scope-pro-x/

NERVO-SCOPE®

PRO-X

Digital Thermal Detection Instrument

for Chiropractic Professionals

INSTRUCTION MANUAL

IMPORTANT

INFORMATION

PLEASE READ FIRST

Differential Temperature: All Nervo-Scopes®

- including the Pro-X – are used to compare,

detect and display differential skin temperatures

along a glide path. Each of the two probes

detect a temperature and the difference is

displayed. Please remember this unit is still a

differential temperature device meaning it

WILL NOT ALWAYS SIT AT ZERO – any air current

or heat from body etc. will cause the needle

to move in either direction and therefore it

will cause the unit to appear “not centered or

calibrated.” This is not accurate – again, it’s

differential temperature. All Nervo-Scope®

units are triple checked and calibrated prior to

leaving our facility.

Note: EDL cannot train anyone on how to use or

interpret scope reading.

Note: All Nervo-Scope® sales are nal and

returns are not accepted. EDL manufactures the

Nervo-Scope®however we are not able to

provide instructions on how to use the scope as

we are not trained Doctors of Chiropractic.

Table of Contents

Introduction......................................................................................................................2

Thermal Detector Arm Adjustment.....................................................3

Operation...........................................................................................................................3

Nervo-Scope®Pro-X Diagram...................................................................5

Analog Display.............................................................................................................6

Digital Display................................................................................................................6

Other Settings................................................................................................................7

Sensitivity............................................................................................................................8

Thermocouple Tips.................................................................................................8

Graphing............................................................................................................................10

Battery Information / Charging..............................................................10

Cleaning.............................................................................................................................. 11

Speacial Features.....................................................................................................11

Nervo-Scope® Pro-X Special Features..........................................12

Service..................................................................................................................................12

CE Certication...........................................................................................................13

Warranty............................................................................................................................13

Trust In EDL........................................................................................................................14

2 3

Introduction

Again we must congratulate you for purchasing one of the nest and most

reliable dual probe thermal detection instruments used for Chiropractic

diagnostics ever manufactured. Our Nervo-Scope® line of products is

trusted by Chiropractic professionals around the world – and has been the

preferred tool for accurately adjusting patients for the most prestigious

doctors for decades. All of our instruments were engineered to deliver a

lifetime of accurate and dependable operation. In general, you should

treat these instruments with the same care and concern you would any

high quality medical product. They are designed to be ergonomic and

completely portable – we know they are used with each and every patient

and you need to trust it will work wherever and whenever you require it. All

Nervo-Scopes® - including the Pro-X – are used to compare, detect and

display differential skin temperatures along a glide path. Nervo-Scope®

instruments have earned the trust and respect of chiropractors worldwide

and we thank you for your never ending trust and loyalty to our brand.

The Nervo-Scope® Pro-X is used comfortably for both pre and post

adjustment assessment. The newest iteration of the longtime trusted scope

was developed to provide accurate readings in a package that is next

generation. As with the ETS-9 and ETS-9A models, the Pro-X is resistant to

interference from cell phones, iPads and tablets, laptops, even uorescent

lights. The Nervo-Scope® Pro-X was developed to reject the inuence of

these sources and consistently give precise and repeatable readings each

and every time the instrument is used. All Nervo-Scopes® are hand-made

by skilled craftsmen in our Virginia facility. In addition to manufacturing new

scopes, we are committed to providing ongoing service on every scope

we ever produced. At EDL – there is a time honored tradition of building a

quality product that may be passed down from generation to generation,

of listening to the Chiropractic community, and developing products based

on your needs – what you require to help your patient. For more information

visit www.edl-inc.com/product/nervo-scope-pro-x.

Thermal Detector Arms & The Maximum

Flexibility for Adjustments

The Nervo-Scope® Pro-X offers fully adjustable legs & heads to

accommodate patients of all shapes, sizes, & ages. This scope may also

be used for equine and animal adjustments as the detector heads are

the most adjustable and exible ever – allowing you to scope patients of

virtually any size or shape.

This scope still features he long time favored Super Glide Rings offering

the smoothest glide possible - with maximum comfort. Now included as a

standard feature are our much-loved contour ex tips which were designed

to smoothly hug the spine offering unmatched adjustability of heads ideal

for every type, size, and style of patient.

The black plastic thumb knob on the front of the meter between the arms, is

used to lock the detector arms in place. When adjustment is required simply

loosen the black plastic thumb knob. The arms should move smoothly and

easily. Carefully compress or expand the detector arms to the desired width

and lock them in place by gently tightening the black plastic thumb knob.

Do not overtighten.

Note: You must move both detector arms in unison. If you move only one

side, you may damage the internal spring and block assembly. Be careful

and do not over-tighten the black plastic knob, but ensure the knob is tight

enough so the detector arms will not move while in use.

Thumb Knob For

Locking Detector

Arms (Do NOT

Overtighten)

Adjustable

Detector Arms

4 5

Operation

Simply press the ON/OFF button to turn on your Pro-X. Once the scope is

powered on, gently place the two detector arms against the skin. Apply the

arms simultaneously and with even pressure to start and maintain your

glide at a constant {slow} rate. It is important to maintain the pressure evenly

with the detector arms at a right angle in relation to the skin surface. It is

suggested to use approximately 0.5 to 1 kg (1 to 2 lbs.) of pressure against the

skin with modications made as needed. Under no circumstance should the

glide cause any discomfort to the patient. With the new thermocouple tip

design, we have virtually eliminated the possibility of scratching a patient.

It is not uncommon for drafts or radiated heat to cause the instrument

indicator needle to appear to be off of the “0” (zero). Please remember this

is a differential temperature diagnostic tool. It is recommended that you

rst reset your Pro-X (see instructions below), and if the problem persists

call one of our experienced technicians at 1.800.342.5335 if you feel your

instrument is in need of adjustment. You may download a Support Request

Form at www.edl-inc.com/chiro-support-request/

To turn the unit on hold the ON/OFF button for a minimum of 6 seconds (unit

will NOT turn on until you have released the button). This is also the “Hard

Reset” so if for ANY reason the software is NOT performing the way it should

you will hold the ON/OFF button for a minimum of 6 seconds and release the

button and you will see the main “EDL Splash Screens” (see below).

The ON/OFF button turns the screen on and off when pushed once. A blue

light will appear in the top right corner telling you the scope is in sleep mode.

Either touch the screen or push the ON/OFF button once to resume use. If

the scope remains unused for one hour the screen will turn off automatically

(and can be used again with just one push of the ON/OFF button or touching

ON/OFF Button

(Hold For A

Minimum Of 6

Seconds To Turn

The Unit On)

Sleep Mode

Indicator Light

Adjustable

Detector Arms

Super Glide Ring

Thumb Knob For

Locking Detector

Arms

Charging

Indicator Light

Settings

Battery Life

Advancted Contour

Flex Thermocouople

Tips

Mode

Button

Touch Screen

(Swipe For “Analog”

Or “Digital” Display)

6 7

the screen) after three hours of no operation, the unit will go into a deep

sleep power save mode. When this happens the blue light will turn off and to

resume use you must hold the ON/OFF button for a minimum of 6 seconds.

Remember the unit will not turn on until you release the button.

This unit has a capacitive touchscreen and functions similarly to almost any

smart touch device (phone or tablet). Simply swipe the screen to change

between the “analog display” or the “digital bar graph display”. Please

remember this unit is still a differential temperature device meaning it

WILL NOT ALWAYS SIT AT ZERO – any air current or heat from body etc. will

cause the needle to move in either direction and therefore it will cause the

unit to appear “not centered or calibrated.” This is not accurate – again,

it’s differential temperature. All Nervo-Scope®units are triple checked and

calibrated prior to leaving our facility.

Analog Display

This view is identical to our original display. The analog view will depict 0-25

on. The movement of the needle directly coincides with the thermocouples

in the unit and when one side senses a temperature greater than the other

side the needle moves to display this while in analog view.

While in analog view you will also see a quick representation with a colored

depiction that follows the needle as the number increases in either

direction.

Digital Display

In digital view you will see a large bar graph that will move either left or right,

based on the temperature detected by the thermocouples. Here you have

the option of getting a true body temperature readout (which reads in °C or

°F) which is extremely helpful when checking Fossa readings.

Using The Scope

Simply turn the unit on and perform your standard glides as you would with

any other Nervo-Scope®diagnostic tool. To change any of the settings - the

gear and wrench icon on the top left of the screen is the settings button.

Click the icon and a drop-down menu will slide down full of the settings.

Analog

Display Digital

Display

Adjust Sensitivity

Change Units or Turn Off

Turn On or Off Left / Right

Change to Dark or

Light Mode

Differential

Readings &

Temperature

May Be Turned

ON or OFF

8 9

Thermocouple Tips

Unfortunately, thermocouple tips are

prone to user error and are the most

common repair. ALL EDL instruments

are built with utmost care and use only

the nest components in our products.

We guarantee every part of our scopes

EXCEPT the thermocouple tips because

it is up to you, the Doctor, to keep your

thermocouple tips clean & free of skin

debris, and properly stored. Tips do not

require maintenance if properly cared

for and cleaned. Please note the new

and advanced tips featured on the Pro-X

are based on the same basic science

& functionality, and are made with the

same precision thermocouple wire as all

of our previous model Nervo-Scopes. It’s

identical. But that is where the similarity

ends. The new and improved Contour

Flex Tips (based on the longtime favorite)

are made of a completely new design,

and one with great signicance. With our

new exclusive design we have virtually

eliminated the ability to have a broken

or sharp edge – as the tip is now one

single thermocouple with a smooth

rounded curved design. That means

with this design, you will never scratch

the patient. The smooth curved wire is

intended to smoothly glide along the

spine and you can easily see if your tip is

broken & makes cleaning much easier.

You are now only cleaning one wire – not

(8) crevices. There are virtually NO hard-

to-reach areas in this new design.

Other Settings

Light/Dark Mode: this will change to a dark background with lighter fonts/

graphics vs a brighter background with darker fonts/graphics. This is user

specic – the unit will default with “light mode settings” however with the

simple push of a button you can alter it to your liking.

Units: °F or °C – while in the digital view this will display actual body

temperature when needed.

Show Temp: You may choose to use the temperature display - this is user

specic. If you do not want to display the temperature you can simply turn

this feature off in the settings menu.

L/R View: While in the Digital View the display will show you an “L” or an

“R” in whichever direction the heat is sensed, giving you a quick and easy

reference.

Sensitivity

The Nervo-Scope® Pro-X features eight (8) Sensitivity Settings. These (8)

sensitivities may be changed by simply pressing the MODE BUTTON. Again,

to change sensitivities, simply press the MODE BUTTON OR in the settings

you may chose to slide the button {slider} to your desired sensitivity. This

advanced tool allows you to change sensitivities while doing a standard

glide. Note: If you are “Graphing” (discussed in the next section) your glide

you cannot change sensitivities - because during a “Graph Session” the

MODE BUTTON has a different function.

Note: the higher the number, the higher the sensitivity - the lower the

number, the lower sensitivity.

EDL cannot suggest the level you should set your sensitivity to - the Pro-X

defaults at sensitivity level (5) however each Chiropractor may tailor this to

their own level of comfort and patients specic needs. Please remember

our older model scopes are generally a lower sensitivity while our newer

model scopes are a higher sensitivity. We suggest you test and practice with

the settings until you nd the most comfortable setting for you. You will nd

the one that best ts your technique with just a little practice.

Figure (2)

Figure (1)

Figure (3)

Graphing

This scope is equipped with a graph function allowing you to temporarily

store the glide you just performed giving you an opportunity (without the

Analgraph) to show your patient what you see. Show them both pre and

post adjustment. To use the Graph feature you may choose to be in ANALOG

VIEW, DIGITAL VIEW or in GRAPH VIEW (to get to the graph screen click the

bottom left button that says GRAPH. This is how you will see your graph after

you complete the glides. Simply hit the START BUTTON from any view and

perform your standard glide. Once you have nished your glide press the

STOP BUTTON (this is the same as the START BUTTON so make sure you only

hit it once as the unit only stores the graph temporarily on the non-analog

version). While performing a glide, if you notice a subluxation, you may press

the MODE BUTTON and instead of changing the sensitivity while you are

graphing this will place a “mark” on the graph thus allowing you to see that

break clearly. Once you have reviewed the graph (for yourself or with the

patient) you then perform another glide and if you choose to graph again

you simply hit the START BUTTON again. This will automatically clear the old

data and allow you to start a new glide.

Battery Information/ Charging

DO NOT use unit while it is charging. While the unit is charging the light will

show orange - when it is completely charged it will turn green. This unit will

hold a charge for roughly (12) hours, please know this number will uctuate

based on the usage of the instrument throughout the day. We recommend

charging it every night. The top right of the screen displays the battery

percentage left for use. We suggest to never let the scope get below 10% as

you don’t want to run out of charge during glide. The screen will begin to get

dim and could interfere with your ability to view your ndings. The scope is

supplied with a charging block and charging cord. To charge your device

slide the USB-C charging cord into the bottom charging port. Charging can

cause a slight increase in heat on the board therefore it is recommended

not to use your scope for approximately (10) minutes after removing the

charging cord from the unit.

Cleaning

For compliance with current OSHA, FDA 510 (K), and EPA regulations; these

instruments must be cleaned between each patient. EDL has tested many

cleaners and Certol has been our cleaner of choice for several years.

ProSpray™ Wipes are surface disinfectant/cleaner towelettes that have

been chosen as our recommended cleaner due to the ratings achieved.

To get the full germicidal benet, the tips must remain moist for 3 minutes.

Simply wipe the tip with a towelette, then use the included brush to gently

brush the detector tip 3 to 5 times. Repeat these instructions for the other

detector. Let the detector tips dry for 3 to 5 minutes.

To clean the instrument housing, use a ProSpray™ disinfectant towelette

as well. Do not apply directly on the instrument. Liquid may seep into the

instrument and adversely affect the circuitry.

Note: Other disinfectants on the market do not have the ratings of

ProSpray™ and the use of these other disinfectants, especially ones that

contain quats or iodophors, will damage your instrument and void your

warranty. To purchase ProSpray™ Wipes, visit our website at www.edl-inc.

com or call our 1.800.342.5335.

Special Features

The Nervo-Scope® Pro-X is a fully functional handheld Nervo-Scope®

instrument intended for use alone, without the optional Wireless

Analagraph®. Both ETS-9 and ETS-9A models are available and the ETS-9A is

the Analagraph® Compatible Unit:

Every Nervo-Scope®model offers unmatched quality and accuracy.

Each model is characterized by industry leading technology that your

business can rely on:

• Proven Track Record of Excellence

– with both Products & Service

• 8 Easy to Change Sensitivities

• Auto Power Off

• Fully Adjustable Tips with

Maximum Motion & Range

• High Sensitivity

• High Noise Immunity

• Contour Flex Tips with One

Thermocouple Wire to Clean

(not 8 Crevices)

• Fast Response

• High Reliability

• Stable Readings

Figure (4)

Figure (5)

Charging

Port

12 13

Service

All EDL Chiropractic instruments are constructed of the highest grade of

materials available, and are subjected to rigorous testing and calibration

procedures before leaving our facility. However if the need for repair

arises, as the original manufacturer of Nervo-Scope®and Analagraph®

Chiropractic instruments we offer ongoing customer support and repair/

calibration services. Due to FDA regulations, Nervo-Scope® repairs are

only completed at our APPROVED REPAIR FACILITIES (one located in VA in the

USA, and one located in Buenos Aires South America), by one of our trained

technicians. Before sending your scope in for service, we recommend rst

trying reset your scope. If returning for service, include a completed Repair

Form inside the case with your scope. Use ample packaging to prevent

further damage in transit. Send the scope inside a corrugated container

with at least 3” of packaging around all sides of the instrument (including

the top and bottom). Label the outside of the package “Fragile – Handle

with Care” and insure for the full value of the instrument. The manufacturer

accepts no responsibility for damages or loss during transit.

Note: Tampering with the instrument may cause additional or more severe

damage, and will void the warranty.

Important: When sending instruments in for service, you must include a

completed Repair Form with full contact information and specic details

as to the nature of the repair service required. Print a Repair Form online at

https://edl-inc.com/chiro-support-request/ or email [email protected].

Send instruments to:

Electronic Development Labs, Inc.

Attn: Repairs & Calibration

244 Oakland Dr.

Danville, VA 24540

USA

*All Nervo-Scope® sales are nal and returns are not accepted. EDL manufactures the

Nervo-Scope® however we are not able to provide instructions on how to use the scope as we are

not trained Doctors of Chiropractic.

CE Certication on Nervo-Scope®

The Nervo-Scope® conforms to the following specications:

Emissions: EN 61326-1:2006:

EN61000-3-2:2006 +A1:2009 +A2:2009, EN61000-3-3:1995 + A1:2001

Immunity: EN 61326-1:2006:

EN 61000-4-2:1995 + A1:1998 + A2:2001, EN61000-4-3:2002,

EN 61000-4-4:2004, EN61000-4-5:1995 + A1:2001, EN61000-4-6:1996 + A1:2001,

EN61000-4-8:1993 + A1:2001, EN61000-4-11:2004

Warranty

Please complete the included Warranty Card and return by USPS, or

complete the Warranty Submission online at...

https://edl-inc.com/chiropractic-warranty-submission-form/

Electronic Development Labs, Inc. (EDL) warrants this product to be free from

defects in material and workmanship under normal use and service for a

period of two years. This warranty excludes thermocouple tips. This warranty

extends only to the original purchaser (a purchase from EDL or recognized

EDL distributor is an original purchaser). This warranty does not apply to:

(1) cosmetic damage, such as scratches, nicks and dents; (2) consumable

parts, such as batteries, unless product damage has occurred due to a

defect in materials or workmanship; or (3) damage caused by accident,

abuse, misuse, water, ood, re, or other acts of nature or external causes. In

addition, EDL reserves the right to refuse warranty claims against products

or services that are obtained and/or used in contravention of the laws of

any country. Should EDL be unable to repair or replace the product within

a reasonable amount of time, the purchaser’s exclusive remedy shall be

a refund of the purchase price upon return of the product. In the event of

failure of a product covered by this warranty, EDL will repair the instrument

when it is returned by the purchaser, freight prepaid, to our manufacturing

facility within the applicable warranty period. Repairs or replacements will

be made without charge and with return freight paid by EDL, unless the

failure was caused by misuse, neglect, accident, or abnormal conditions

of operation or storage, in which case repairs will be billed at a reasonable

cost. In such cases, an estimate will be submitted before work is started,

14 15

if requested. The foregoing warranty is in lieu of all other warranties,

expressed or implied, including but not limited to any implied warranty of

merchantability, tness, adequacy for any particular purpose or use. EDL

shall not be liable for any special, incidental, or consequential damages,

whether in contract, tort, or otherwise.

For Warranty help and support call: 1.800.342.5335 or e-mail:

[email protected].

Trust In Electronic Development Labs, Inc. (EDL)

EDL has a long tradition of excellence because being the best isn’t nearly

enough for us. Every year, every day, we push ourselves to go beyond

our best. That’s why no matter what it is, every EDL product is the most

accurate, most cost-effective, most sturdy, longest lasting in its class. Our

ethic of continual improvement has been the core of our company since

day one. We were established in 1943 as a repair house for temperature

instruments, and it was not long before we were not just repairing

instruments, but producing a better product than what we were repairing.

Our drive to be the best made our future obvious: we could make superior

instruments, so we did. We’re still, after 80 years, committed to being the

best temperature equipment manufacturer in America. Our products

don’t just make the world go ‘round; they make it bigger. The legacy of EDL

is the legacy of innovation and progress of 20th & 21st century America.

Hand in hand with hundreds of satised clients, we’re forging ahead in

the 21st century, pushing boundaries and preserving the good works that

benet all of us. If you’re a long-time customer, we appreciate the mutual

support. If you’re new to our business, we can’t wait to help you build a

legacy as long-lasting as ours.

Thank you for purchasing the New Nervo-Scope®Pro-X.

244 Oakland Drive Danville, VA 24540

www.edl-inc.com • [email protected]

Toll-Free: 1.800.342.5335 • Fax: 434.799.0847

Electronic Development Labs, Inc.

The Temperature People® - Since 1943

Otros manuales para NERVO-SCOPE PRO-X

Tabla de contenidos

Otros manuales de Equipo de laboratorio de EDL

EDL

EDL STS-COOL Manual de usuario

EDL

EDL CRYO-CAL-1 Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario