EDL Displays 3023 Manual de usuario
EDL Displays, Inc.
3023
Installation and Operation
Manual
Model 3023
LCD Video Monitor
Revised February 20, 2006
www edldisplays com
3023 Operation and Maintenance Manual EDL Displays, Inc. February, 2006
2
Table of Contents
INTRODUCTION 3
FEATURES 3
SPECIFICATIONS 3
INSTALLATION 5
GENERAL 5
UNPACKING 5
MECHANICAL INSTALLATION 5
SIGNAL INPUT CONNECTIONS 6
GRAPHICAL USER INTERFACE AND ON-SCREEN DISPLAY 11
Main Menu 12
PICTURE Submenu 12
OSD Submenu 13
UTILITY Submenu 13
Quick Menu 13
RECOMMENDED USE 15
Safety Precautions and Maintenance 15
Table of Figures
FIGURE 1 MODEL 3023 OUTLINE DRAWING 9
FIGURE 2 REAR PANEL INPUT CONNECTIONS 10
FIGURE 3 IR REMOTE 11
3023 Operation and Maintenance Manual EDL Displays, Inc. February, 2006
3
Introduction
Features
• 23.1" diagonal LCD (equivalent to 25" CRT)
• Rugged design intended for harsh environments
• etal Enclosure with VESA mount, Rack mount,
Console mount or Tabletop
• Auto-detection of multiple display formats from
640x480 to 1600x1280, including interlaced
formats, with excellent scaling to 1600x1200
native resolution
• VESA DP S compliant, VESA DDC1/2 plug
and play compliant
• Full-range backlight dimming standard
• Backlight stabilization standard
• Accepts digital or analog RGB at DVI-I connector, S-video or composite video at DIN or RCA
connector
Specifications
Display
Active area 470 4mm x 352 8mm (18 5" x
13 9")
Native resolution 1600 x 1200
Pixel pitch 0 29mm (0 098 X RGB)
Colors 16,777,216
(256 gray levels)
Contrast ratio 400:1
(typical, at 25°C)
Luminance 250 cd/m² (typical, at 25°C)
Luminance variation 25% (max, at 25°C)
Viewing angle, H ± 80° (typical, for CR ≥ 10)
Viewing angle, V ± 80° (typical, for CR ≥ 10)
CIE white X = 0 313, Y = 0 329
(typical, at 25°C)
Response time t
r
= 15msec, t
f
= 10msec
(typical, at 25°C)
Backlight
Type 6 CCFL
Lifetime 50,000 hrs
3023 Operation and Maintenance Manual EDL Displays, Inc. February, 2006
4
(typical, at 25°C)
Electromagnetic Environment
Susceptibility Per EN55022
Emissions Per EN55022, FCC class A
Safety
Design Per UL/C 1950, EN60950
Physical Environment
Temperature (operating) 0°C to +50°C
Temperature (storage) -20°C to +60°C
Relative Humidity (operating) 90%, condensing
(to 50°C)
Relative Humidity (storage) 90%, condensing
(to 60°C)
Altitude (operating) Sea level to 15,000ft
(4500m)
Altitude (storage) Sea level to 40,000ft
(12000m)
Shock (operating) 30g, 11msec ½ sine
Shock (storage) 30g, 11msec ½ sine
Weight (in standard
configuration) 36lbs (16 3Kg)
Power (in standard
configuration) 95W
Vibration (operating) ±1mm, 2 to 13Hz; 0 7g, 13 to
100Hz, 3 axes
Vibration (storage) TBD
Inputs
Video signal input
RGB digital (TMDS) or RGB
analog, 0 7V
p-p
into 75Ω, S-video
or composite video
Sync signal input
Separate TTL H&V, Composite TTL
H&V,
Sync on green
Sync selection Automatic
Signal connector
DVI-I for RGB, DIN for S-video,
RCA jack for composite video
(RGB via HD-15 or BNC handled
with cable options)
3023 Operation and Maintenance Manual EDL Displays, Inc. February, 2006
5
I STALLATIO
GENERAL
This section describes the installation of the monitor. The monitor is pre-aligned at
the factory to user input requirements. However, there may still be the need for
some minor adjustments to be made. Those procedures will be provided later in the
Calibration Procedures section.
UNPACKING
Before unpacking, the carton should be inspected for shipping damage. The carton
should be carefully opened and the monitor removed. The monitor should then be
carefully inspected for shipping damage. If damage has occurred, the shipping
carton and all packing materials should be saved for possible inspection by the
shipping company. The shipping company and EDL Displays should be notified at
this time.
MECHANICAL INSTALLATION
The 3023 monitor is designed to be mounted and secured in place on any flat
surface.
3023 Operation and Maintenance Manual EDL Displays, Inc. February, 2006
6
SIG AL I PUT CO ECTIO S
The odel 3023 LCD onitor accepts both digital and analog video signals at its
integrated connector (DVI-I).
When connecting the monitor to a digital signal source, it is necessary to use a cable
that terminates on the monitor end with a DVI-I connector that mates to the monitor’s
connector, and on the source end with a DVI connector appropriate to the source –
usually a DVI-D connector. (See cable descriptions below for details.)
When connecting the monitor to an analog signal source, it is necessary to use a cable
that terminates on the monitor end with a DVI-I connector that mates to the monitor’s
connector, and on the source end with an HD-15 connector or with some combination of
three to five BNC connectors, as appropriate to the source. (See cable descriptions
below for details.)
Provided the correct cable is used, the monitor will automatically sense adapt to any
analog or digital signals applied. In the case of analog signals, the monitor will
automatically sense and adapt to the sync type (sync-on-green, composite separate
sync, or separate horizontal and vertical syncs).
Video Input Connector Pin Assignments
Pin
Signal Pin Signal
1 T DS Data 2 - 16 Hot Plug Detect
2 T DS Data 2 + 17 T DS Data 0 -
3 T DS Data 2/4 Shield 18 T DS Data 0 +
4 T DS Data 4 - 19 T DS Data 0/5 Shield
5 T DS Data 4 + 20 T DS Data 5 -
6 DDC Clock 21 T DS Data 5 +
7 DDC Data 22 T DS Clock Shield
8 Analog Vertical Sync 23 T DS Clock +
9 T DS Data 1 - 24 T DS Clock -
10 T DS Data 1 + C1 Analog Red
11 T DS Data 1/3 Shield C2 Analog Green
12 T DS Data 3 - C3 Analog Blue
13 T DS Data 3 + C4 Analog Horizontal Sync (or composite H & V
sync)
14 +5VDC (power input) C5 Analog Ground (RGB return)
15 Ground (5VDC, and analog H and V sync
return)
3023 Operation and Maintenance Manual EDL Displays, Inc. February, 2006
7
Cable Options
DVI-I to DVI-D
This cable should be used when connecting the monitor to a signal source that provides
digital outputs by way of a DVI-D connector.
DVI-D (output) Signal DVI-I (input)
1 T DS Data 2 - 1
2 T DS Data 2 + 2
3 T DS Data 2/4 Shield 3
4 T DS Data 4 - 4
5 T DS Data 4 + 5
6 DDC Clock 6
7 DDC Data 7
8 Not connected 8
9 T DS Data 1 - 9
10 T DS Data 1 + 10
11 T DS Data 1/3 Shield 11
12 T DS Data 3 - 12
13 T DS Data 3 + 13
14 +5VDC (power input) 14
15 Ground (5VDC, and analog H and V sync return) 15
16 Hot Plug Detect 16
17 T DS Data 0 - 17
18 T DS Data 0 + 18
19 T DS Data 0/5 Shield 19
20 T DS Data 5 - 20
21 T DS Data 5 + 21
22 T DS Clock Shield 22
23 T DS Clock + 23
24 T DS Clock - 24
DVI-I to 3 BNC
This cable should be used when connecting the monitor to an analog source that
provides RGB video with composite sync on green by way of three BNC connectors.
Source (output) Signal DVI-I (input)
BNC R Analog Red C1
BNC G Analog Green (with composite sync) C2
BNC B Analog Blue C3
(BNC shells) Analog Ground C5
DVI-I to 4 BNC
This cable should be used when connecting the monitor to an analog source that
provides RGB video and separate composite sync by way of four BNC connectors.
3023 Operation and Maintenance Manual EDL Displays, Inc. February, 2006
8
Source (output) Signal DVI-I (input)
BNC R Analog Red C1
BNC G Analog Green C2
BNC B Analog Blue C3
BNC H/C Composite Sync C4
(BNC RGB shells) Analog RGB Ground C5
(BNC H/C shell) Sync Ground 15
DVI-I to 5 BNC
This cable should be used when connecting the monitor to an analog source that
provides RGB video and separate horizontal and vertical sync by way of 5 BNC
connectors.
Source (output) Signal DVI-I (input)
BNC R Analog Red C1
BNC G Analog Green C2
BNC B Analog Blue C3
BNC H/C Horizontal Sync C4
BNC V Vertical Sync 8
(BNC RGB shells) Analog RGB Ground C5
(BNC H/C and V shells) Sync Ground 15
DVI-I to HD-15
This cable should be used when connecting the monitor to an analog source that
provides RGB video and separate horizontal and vertical sync by way of a VGA style
HD-15 connector.
Source HD-15 (output) Signal DVI-I (input)
1 Analog Red C1
2 Analog Green C2
3 Analog Blue C3
13 Horizontal Sync C4
14 Vertical Sync 8
6, 7, 8 Analog RGB Grounds C5
10 Sync Ground 15
3023 Operation and Maintenance Manual EDL Displays, Inc. February, 2006
9
POWER BRIGHTNESS
SOURCE UPDOWNENU LEFT RIGHT AUTO
POWER
VIDEO IN
FUSE NTSC S-VHS
SERIAL 1 SERIAL 2
S-VIDEO VIDEO DVI-I SERIAL 1
85-265 VAC
47-440 Hz
POWER
FUSE
2 A P SBSERIAL 2
Figure 1 Model 3023 Outline Drawing
3023 Operation and Maintenance Manual EDL Displays, Inc. February, 2006
10
POWER
VIDEO IN
FUSE NTSC S-VHS
SERIAL 1 SERIAL 2
Figure 2 Rear Panel input connections
Tabla de contenidos
Otros manuales de Monitor de EDL Displays
