EDIC-mini Tiny+ A77 Manual de usuario

Digital voice recorders

of EM Tiny+, Tiny16+, Tiny S+ series

Short operation manual

Purpose

Voice recorders of the Edic-mini Tiny(16)+, Tiny S+ series are professional devices

intended for making high quality record of voice messages into built-in flash memory. The

recordings can be further uploaded onto the PC. These voice recorders feature really

unique characteristics (the world's smallest size, maximum autonomy, high acoustic

sensitivity etc). The recorders are marketed as personal means of documenting audio

information providing protection against fake records as well as unauthorized access

to records. Recorders designed for home use by mass consumers.

The EMPlus program located in the built-in memory is used to operate the recorder.

SoundProcessor program is designed to process the transferred records and to

facilitate the conversion of records to text. The programs operate under Windows XP

(SP2, SP3) / Vista / 7 / 8.

Model

Power supply

Dimensions, mm

Weight, g

Tiny+ A77

Li-Pol 105mA/h rech.batt

29x15x12

Tiny+ A81

Li-Pol 500 150mA/h rech.batt

78x13x13

Tiny+ A83

Li-Pol 800 mA/h rech.batt

38x18,5x23,5

Tiny+ B70

LR43 battery

37x15x7

Tiny+ B73

LR43 battery

46x14x6

Tiny+ B74

CR2016 battery

56x26x4

Tiny+ B76

CR2016 battery

37x25x6

Tiny+ B80

CR2450 battery

48х32х7

Tiny+ E71

External, 3.5-6V

46x14x6

Tiny16+ A75

Li-Pol 150mA/h rech.batt

77x27x4

Tiny16+ A78

Rech.batt

41x29x8

Tiny16+ A79

Rech.batt

53x73x17

112

Tiny16+ A82

Li-Pol 500 150mA/h rech.batt

90х13х13

Tiny16+ E72

External, 3.5-6V

46x14x6

Tiny16+ S78

Li-Pol 150mA/h

rech.batt; solar battery

41x29x8

Tiny S+ E84

External, 3.5-6V

46х14х6

*take into account that the autonomy specified is for 8kHz/8 bit mode, when sample rate

or capacity is higher autonomy is lower (for 16kHz/16 bit roughly twice for models with

rechargeable batteries, four times for models with batteries).

It is not advisable to use 22kHz/16 bit record mode for recorders with batteries. The autonomy

also depends on the battery quality.

Autonomy*,

Signal-to-

noise, dB

Sensitivity,

Sample rate, kHz

Frequency band, Hz

8; 11;16;22

100-10000

210

8; 11;16;22

100-10000

200

8; 11;16;22

100-10000

8; 11;16;22

100-10000

8; 11;16;22

100-10000

8; 11;16;22

100-10000

8; 11;16;22

100-10000

190

8; 11;16;22

100-10000

8; 11;16;22

100-10000

8; 10;13,3;20

100-10000

8; 10;13,3;20

100-10000

1680

8;10;13,3;20

100-10000

140

8;10;13,3;20

100-10000

8; 10;13,3;20

100-10000

8; 10;13,3;20

100-10000

8; 11; 16; 22;

Mono & Stereo

100-10000

Record time in 8kHz/uLaw mode –300h (600h; 1200h; 2400h - depending on model index:

300HQ, 600HQ, 1200HQ, 2400HQ)

Interface: USB 2.0

Operating temperature range: 0…+50°C

Operation life: 3 years

Main features

•Voice Activating System (VAS)

•Timers: Once and Daily

•Linear and circular recording

•Built-in clock, calendar

•Password protection of the records

•Built-in digital markers provides protection from modification of records

•Control and indication: switch and LED

In box

•Digital recorder,

•USB-adapter,

•1 battery (for models with battery),

•device for battery removing (B76 model),

•operation manual,

Operating the recorder

For recorders with battery first set the battery in the recorder. LED will flash three

times and then will light for 40 seconds. After LED extinction the recorder is ready for

operation.

For model B70. Insert a battery into a special compartment. Set the switch to On

position for 2 seconds and then to Off position. The led flashes 3 times and then will

be active for 40 seconds. After the led turns off, the recorder is ready for operation.

Attention: When installing batteries, observe the polarity (see marking on the recorder's

case). Inappropriate installing of battery may lead to failure of the recorder system,

which is not covered by the Warranty. Do not store the recorder for a long time with a

battery inserted, as the battery may leak and lead to recorder failure, and that is not

covered by the Warranty.

For recorders with rechargeable battery, first charge the battery. To do this, gently and

without strain follow the correct polarity, connect the recorder to the USB adapter, which

is in the delivery set, aligning the mark on the recorder with the one on the adapter.

Connect the adapter to the USB port of the PC or charger device, e.g. of a mobile phone,

with the output voltage of 5V and a USB connector. During charging, the LED flashes

rarely (interval of 5 seconds), and after charging has been completed, it starts flashing

frequently. Full charging takes approximately 2.5 hours.

Please note: In order to avoid deep discharge and related damage of the rechargeable

battery, the recorder must be charged at least once a month. The failure of the

battery due to its deep discharge is a violation of the rules of operation. In case of a

complete battery discharge, the procedure to restore the operation of the Recorder

described in full operation manual.

Important!

To prevent deep discharge and related damage of the rechargeable battery, disconnect

USB adapter from the Recorder after disconnecting adapter from PC. Use only the USB

adapter included in the delivery set. Using the USB adapter of third party may cause

the recorder’s malfunction.

For recorders with external power supply –switch the recorder to OFF position and

then connect DC power supply (3.6-6V) to pins 1 (minus, gold colored wire) and 2

(plus, red colored wire) of the cable coming from the Recorder. If the voltage source

is represented by a Li-Pol battery, the connected pins 2 and 3 (green colored wire)

of the cable can provide battery charge with the current of 100mA (provided the

recorder is connected to the adapter, and the adapter is connected to the USB).

Starting the record

The recorder switches to operation mode after the Switch has been shifted to ON. The

LED flashed five times and recording starts. After the transition to operation mode, the

green LED of the recorder makes two series of flashes.

The first series of LED flashes corresponds to battery charge level:

•1 flash - charge level is 80-100%,

•2 flashes - charge level is 20-80%,

•3 flashes - low charge level, 0-20%;

The second series correspond to free memory card capacity:

•1 flash states for 75-100%,

•2 flashes –50-75%,

•3 flashes –25-50%,

•4 flashes –1-25 %.

To stop the recording shift the Switch to OFF position. The LED will flash for 10-12

seconds and then the record stops.

Record playback

When connecting the recorder to the PC please comply with strict order: first

connect USB adapter to the recorder, next connect adapter to the PC

port (disconnection order: first disconnect the USB adapter from the PC, then

recorder from the adapter). Red and green LEDs are briefly on the adapter.

Windows recognizes a new removable drive, which contains two files:

EMPlus.exe and emplus.srv. Run “EMPlus.exe” program.

During first connection there will be an offer to install program to your PC. After

accepting short and full operation manuals, EMPlus and SoundProcessor programs

and manuals will be installed to the hard drive.

Run “EMPlus.exe” program from recorder or hard drive.

Choose connection type USB 2.0 HS. The content of the recorder is on the left side of

the window. Select the desired record and click Play on the bottom of the left panel. To

upload right click on the selected record and choose «Copy to default folder» from the

context menu. The record will be converted to WAV to be displayed at the right panel.

For model B70. From page of the B70 recorder on our web-site

www.ts-market.com, from section Product files (Software) download folder

«B70 soft» to the PC. Unzip the folder and install (as Administrator) driver, file

B70_DrvSetup_1_0.exe. Slide the recorder’s cover with flash memory off in the

direction indicated by the arrow and detach it from the recorder. Connect the cover to

the USB adapter of the recorder B70. Connect the USB adapter to PC USB port. After

LED of adapter lights up, run «EMplus.exe» from the folder «B70 soft». Select type of

connection USB 2.0 Reader. The left part of the program’s window displays the

contents of the recorder’s memory. Further work with EMPlus program is the same

as for other recorders.

Reset

Incase of rechargeable battery operation error press the Reset button with sharp thing

(match or toothpick). For the recorders with batteries: remove and install battery again

in a few seconds. For the recorders with external supply: shut down and then turn on

the power supply.

Warranty

The manufacturer undertakes warranty repair liabilities for 1 year from the date of

purchase, but no longer than 2 years from the date of manufacture of the product

(warranty does not cover batteries), other rules are regulated by the Law «On Protection

of Consumers' Rights».

We are always grateful for any comments and proposals regarding our products, as

well as the detailed description of the conditions and causes that led to failure. We

appreciate time and skills of our customers, and if the problem is not that complicated,

we do not mind if you try to solve the problem yourself. If the attempt to repair was

fairly neat, you do not lose your warranty. In case of major breakdowns and mechanical

damage to the recorder, your warranty will be terminated. Our products have no seals.

If you are experiencing problems with the use of our products, we recommend the

following:

•Go to www.ts-market.com and see a list of common problems (FAQ

section) and their solutions. Perhaps there is a solution to your problem.

•If the problem persists, contact technical support at support@ts-market.com

with the detailed description of your problem, the conditions it

appeared, the exact product name according to the passport, firmware,

software, operating system, and other relevant information. The better

you describe the problem, the sooner it is resolved. E-mail

correspondence is most effective because it preserves history and

minimizes misunderstanding. You will receive a response to

your request by e-mail within 24 hours (excluding

weekends and holidays).

Technical Support

Technical support is available by e-mail: support@ts-market.com

We are constantly working to improve the software and documentation. You can always

download the latest version of the software for free and get information on products on

our website: http://www.ts-market.com.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Grabadora de voz de EDIC-mini

EDIC-mini

EDIC-mini LCD mSD-A Manual de usuario

EDIC-mini

EDIC-mini Pro B42 Manual de usuario

EDIC-mini

EDIC-mini Tiny A31 Manual de usuario

EDIC-mini

EDIC-mini TINY STEREO series Manual de usuario

EDIC-mini

EDIC-mini EM Tiny Plus Series Manual de usuario

EDIC-mini

EDIC-mini 3D-recorder Manual de usuario

EDIC-mini

EDIC-mini CARD16 Series Manual de usuario

EDIC-mini

EDIC-mini Tiny16 A44 Manual de usuario

EDIC-mini

EDIC-mini TINY A27 1120 Manual de usuario

EDIC-mini

EDIC-mini Tiny 16 A63 Manual de usuario

EDIC-mini

EDIC-mini Tiny 16 B25 series Manual de usuario

EDIC-mini

EDIC-mini TINY SOLAR 1120 Manual de usuario

EDIC-mini

EDIC-mini Tiny A22 series Manual de usuario

EDIC-mini

EDIC-mini Daily S50 Manual de usuario

EDIC-mini

EDIC-mini Tiny B33 Manual de usuario

EDIC-mini

EDIC-mini TINY16 B26 Manual de usuario

EDIC-mini

EDIC-mini Tiny16 A37 Manual de usuario

EDIC-mini

EDIC-mini EM-Card Series Manual de usuario

EDIC-mini

EDIC-mini Tiny B32 Manual de usuario

EDIC-mini

EDIC-mini Tiny B30 series Manual de usuario

EDIC-mini

EDIC-mini Tiny16 A35 Manual de usuario

EDIC-mini

EDIC-mini Tiny16+ Series Manual de usuario

EDIC-mini

EDIC-mini Tiny+ series Manual de usuario

EDIC-mini

EDIC-mini Plus A9 Manual de usuario

Manuales populares de Grabadora de voz de otras marcas

Sony

Sony ICD-UX533F Manual de usuario

RCA

RCA VR5230 Manual de usuario

Ramsey Electronics

Ramsey Electronics BULLSHOOTER ENDLESS LOOP BS2C Guía del usuario

Sony

Sony TCM-400DV Manual de usuario

LogTag

LogTag TREL30-16 Manual de usuario

SVAT

SVAT CVP800 Manual de usuario

Marantz

Marantz PMD620 Manual de usuario

Zoom

Zoom H4next Manual de usuario

Roland

Roland BR-900CD Manual de usuario

JVC

JVC ProHD GY-HMZ1U Manual de operación y mantenimiento

Panasonic

Panasonic PQT8531-P Manual de usuario

Sanyo

Sanyo TRC-6400 Manual de usuario

Tascam

Tascam DR-07 Manual de usuario

Olympus

Olympus DW-90 Manual de usuario

Sanyo

Sanyo ICR-B150 Manual de usuario

Korg

Korg D4 Manual de usuario

Sony

Sony ICD-SX46 - Ic Recorder Manual de usuario

Olympus

Olympus DIGITAL VOICE RECORDER WS-200S Instrucciones de montaje