EdgeStar CW1200 Instrucciones de instalación
Reassembly of the coin trap/lint trap component of the EdgeStar Washer Dryers
If the end piece of the coin trap component on EdgeStar combination washer dryers is
fully unscrewed, the component can come completely apart. Here is how you re-assemble
it.
1. Start with the pieces shown in the order below.
2. Put the rubber gasket onto the end of the long gray piece, as show below.
3. Put the white piece onto the gasket, as shown below.
4. Lightly screw the remaining piece onto the assembly, as shown below.
5. Now the component is reassembled and can be reinserted (and then tightened)
into the combo.
Note: here is another view of the correct order and placement of the component parts:
Otros manuales para CW1200
2
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Lavadora secadora de EdgeStar
EdgeStar
EdgeStar CW 2200 Manual de usuario
EdgeStar
EdgeStar CWD1550BL-1 Manual de usuario
EdgeStar
EdgeStar CW1200 Manual de usuario
EdgeStar
EdgeStar CW1200 Manual de usuario
EdgeStar
EdgeStar SW5L30D Manual de usuario
EdgeStar
EdgeStar sw5l40d Manual de usuario
EdgeStar
EdgeStar CWD1510S Manual de usuario
EdgeStar
EdgeStar CWD1550W Manual de usuario
EdgeStar
EdgeStar CWD1510W Manual de usuario
EdgeStar
EdgeStar CW1210V Manual de usuario
