EdgeStar TWR282S Manual de usuario

ii V2.1-07282017

Thermoelectric Wine Cooler

Owner’s Manual

For more information on other great EdgeStar products on the web, go to http://www.edgestar.com

To use the EdgeStar self-diagnostic tool, go to https://support.edgestar.com

TWR282S

Important Safety Information

Improper handling can cause serious damage to the EdgeStar wine cooler and / or injury to the

user. This wine cooler is designed for domestic indoor use only. Do not use the unit for

industrial or commercial use. Any other use may invalidate the warranty. Please review the

ratings label located on the rear panel of the unit for electrical and other technical data related

to this unit. The unit must be used in a properly grounded wall outlet.

Please read and follow the safety information listed below to reduce the risk of fire,

electric shock, or injury.

Electrical Safety

 Do not exceed the power outlet ratings.

 It is recommended the wine cooler be connected on its own circuit.

 The unit must be installed in accordance with state and local electrical codes.

 A standard electrical supply (115 V, 60Hz), that is properly grounded in accordance with the

National Electrical Code and local codes and ordinances is required.

 Use outlets that cannot be turned off by a switch or pull chain.

 Always turn the unit off and unplug it from the outlet when cleaning.

 Unplug the unit if it is not going to be used for an extended period of time.

 Do not operate the unit with a power plug missing the ground plug, a damaged cord, or a loose

socket.

 Be sure the wine cooler is properly grounded.

 Never plug or unplug the unit with wet hands.

 Do not bypass, cut, or remove the grounding plug.

 Do not use extension cords or power strips with this unit. You may need to contact your electrician if

it is necessary to use a longer cord or if you do not have a grounded outlet. Do not modify the power

cord’s length or share the outlet with other appliances.

 Do not start or stop the unit by switching the circuit’s power on and off.

 If the power cord is damaged, it must be replaced by the manufacturer or a qualified technician.

 Never repair the unit while it is plugged in.

 Immediately unplug the unit if it makes strange sounds, emits smells, or smoke comes out of it, and

contact customer service.

 Do not remove any part of the casing unless you are instructed to do so by an authorized

technician.

 You should never attempt to repair the unit yourself.

 Contact customer service for service options if the unit needs service.

Note: This owner’s manual is provided for reference use only. Specifications may change

without prior notice. Refer to the product label on the back of your wine cooler for the latest

technical information.

General Safety

 To prevent back and other types of injuries, use at least two people to move and install the wine

cooler.

 This appliance is not intended for use by persons, including children, with reduced physical,

sensory, or mental capabilities, unless they have been given supervision or instruction concerning

the use of the appliance by the person(s) responsible for their safety.

 The temperature range for this cooler is optimized for wine storage. Perishable food items may

require a different storage environment.

 Do not place hot or warm items into the cooler before they cool down to room temperature.

 This unit is designed to be installed indoors, and protected from rain, sleet, snow, and / or moisture.

 This unit is not intended to be used by children.

 Children should be supervised to ensure that they do not play with this product.

 Never allow children to crawl inside the wine cooler. If you are disposing of the unit, remove the

door.

 Do not use this cooler near flammable gas or combustibles, such as gasoline, benzene, thinner, etc.

 Do not place the unit near heat sources such as ovens, grills, or direct sunlight.

 Only use in an upright position on a flat, level surface and provide proper ventilation.

 Do not pinch or kink the power supply line.

 Do not leave any cleaning solutions in the unit.

 Do not use solvent-based cleaning agents or abrasive solutions to clean the unit as they may

damage the interior and exterior.

 Do not place any other appliances or allow anyone to sit on top of the unit.

 Do not operate the unit upside down, on its side, or at an angle off level.

 Do not move the unit without emptying the contents and securing the door in a closed position.

iii

Table of Contents

IMPORTANT SAFETY INFORMATION……………………………………………………………………………………...I

TABLE OF CONTENTS………………………………………………………………………………………………………..III

FIRST TIME OPERATING INSTRUCTIONS………………………………………………………………………………………….1

INTRODUCTION……………………………………………………………………………………………………………….. 1

PARTS IDENTIFICATION…………………………………………………………………………………………………….. 2

EXTERIOR VIEW………………………………………………………………………………………………………………….. 2

INTERIOR VIEW (WITHOUT DOOR)………………………………………………………………………………………………. 2

INSTALLING THE WINE COOLER………………………………………………………………………………………….. 3

UNPACKING THE WINE COOLER…………………………………………………………………………………………………. 3

TYPES OF INSTALLATION………………………………………………………………………………………………………….3

Free-standing Installation……………………………………………………………………………………………………… 3

INSTALLATION CLEARANCE REQUIREMENTS……………………………………………………………………………………..4

ELECTRICAL REQUIREMENTS……………………………………………………………………………………………………. 5

Recommended Grounding Method……………………………………………………………………………………………5

LEVELING THE WINE COOLER……………………………………………………………………………………………………. 5

OPERATION……………………………………………………………………………………………………………………. 6

INSTALLATION CHECK LIST BEFORE OPERATION……………………………………………………………………………….. 6

ADJUSTING THE TEMPERATURE…………………………………………………………………………………………………. 6

Internal Control Box……………………………………………………………………………………………………………. 6

NORMAL SOUNDS…………………………………………………………………………………………………………………7

DEFROSTING………………………………………………………………………………………………………………………7

PREPARING THE WINE COOLER FOR STORAGE………………………………………………………………………………….7

CLEANING AND MAINTENANCE……………………………………………………………………………………………8

EXTERIOR CLEANING…………………………………………………………………………………………………………….. 8

INTERIOR CLEANING………………………………………………………………………………………………………………8

WATER PAN AND CONDENSATION………………………………………………………………………………………………..8

MAINTENANCE……………………………………………………………………………………………………………………. 8

TROUBLESHOOTING………………………………………………………………………………………………………… 9

SPECIFICATIONS………………………………………………………………………………………………………………11

EDGESTAR LIMITED WARRANTY…………………………………………………………………………………………. 12

First Time Operating Instructions

Before use, make sure all packaging labels and materials are removed from the unit. Be sure to

keep track of all included parts and pieces before discarding packaging materials. It is advised

that you keep the original box and packaging materials in case you ever need to move or ship

the appliance in the future.

Let the unit stand for at least 24 hours before you use it. The instruction manual should be read

before use.

Introduction

Thank you for purchasing this EdgeStar wine cooler. We hope that this purchase will be the

beginning of a lasting and rewarding relationship between you and EdgeStar. We will provide

the customer support and exemplary products necessary to nurture that relationship.

This manual contains important information regarding the proper installation, use, and

maintenance of your wine cooler. Following this manual will ensure that your product will work at

its peak performance and efficiency.

Please save the original product packaging in case you need to safely transport your wine cooler.

For Your Records:

Please write down the model number and serial number below for future reference.

Both numbers are located on the ratings label on the back of your unit and are needed

to obtain warranty service. You may also want to staple your receipt to this manual as it

is the proof of your purchase, and is also needed for service under your warranty.

Model Number:

Serial Number:

Date of Purchase:

For a more efficient experience, please do the following before contacting customer service:

 If you received a damaged product, immediately contact the retailer or dealer that sold you

the product.

 Read and follow this instruction manual carefully to help you install, use, and maintain

your wine cooler.

 Read the troubleshooting section of this manual as it will help you diagnose and solve

common issues.

 Visit us on the web at http:/www.edgestar.com to register your product, download product

guides, and access additional troubleshooting resources and up-to-date information. You

can also find an interactive self-diagnostic tool at https://support.edgestar.com

 If you need warranty service, our friendly customer service representatives are available

via email at [email protected] or by telephone at 1 (866) 319-5473.

Tip: Gather the model and serial number from the product label and write them down before

loading the wine cooler.

Parts Identification

Exterior View

Interior View (Without Door)

Note: The carbon filter

should be replaced

every 3-6 months

depending on the

unit’s exposure level

to odor. If the unit is

placed in the kitchen

regular replacement

every 3 months is

ideal.

Important: Do not remove any safety, warning, or product information labels from your wine

cooler.

Installing the Wine cooler

The wine cooler should be installed in accordance with local electrical code requirements. The

wine cooler should also be placed in a location that is strong enough to support its total weight,

keeping in mind that it will weigh substantially more when fully loaded than when empty.

Before you plug the wine cooler into a power supply, be sure to let it stand upright for at

least 24 hours to allow the temperature to acclimate.

Unpacking the Wine cooler

Carefully remove the packaging materials. Remove any shipping tape and glue from your wine

cooler before using. Do not use sharp instruments, rubbing alcohol, flammable fluids, or

abrasive cleaners to remove tape or glue. These products can damage the surface of your

wine cooler.

Types of Installation

This wine cooler has been designed for free-standing installation only. There must be adequate

ventilation space around the top, back, and sides of the unit.

Free-standing Installation:

A free-standing installation will allow you to install the wine cooler in almost any place you

desire. You must follow the stated instructions for electrical requirements, installation

clearance, and leveling the wine cooler.

Tip: Gather the model

and serial number

from the product label

and write them down

before installing the

wine refrigerator.

Warning: DO NOT install the wine cooler built-in or behind a closed cabinet door.

Important Notes:

 Choose a location that has an ambient temperature of 78° F. Operation outside this

temperature may result in lowered efficiency or cause other adverse effects.

 This unit MUST be installed indoors in an area protected from the elements, e.g. wind,

rain, water spray or drips.

 The wine cooler should not be located next to ovens, grills, or other high heat sources.

Installation Clearance Requirements

 To ensure proper ventilation, allow at least 5” of clearance at the back, 3” at the top, and

3” at the sides.

 The wine cooler should be installed on a firm and level surface that will be able to support

the entire weight of a fully loaded unit. It is important for the wine cooler to be level in

order to work properly. If needed, you can adjust the height of the wine cooler by rotating

the feet. See the “Leveling the Wine Cooler” section.

 A standard electrical supply (115 VAC only, 60 Hz), properly grounded in accordance with

National Electrical Code and local codes and ordinances, is required.

Important Notes:

• Choose a location that has

ambient temperatures above

50°F and below 95°F.

Operation outside these

temperatures may result in

lowered efficiency or cause

other adverse effects.

• This unit MUST be installed

in an area protected from the

elements, e.g., wind, rain,

water spray or drips.

• The wine refrigerator should

not be located next to ovens,

grills or other high heat

sources.

• Do not kink or pinch the

power supply cord between

the wine refrigerator and wall

or cabinet.

ELECTRIC SHOCK HAZARD!

 Plug into a grounded 3-prong outlet.

 Never remove the grounding prong from the plug.

 Never use an adapter to bypass the grounding prong.

 DO NOT use an extension cord.

 Failure to follow these instructions can result in fire, electrical shock, or death.

Note: You must adjust the feet to level the wine cooler.

Electrical Requirements

Before you move your wine cooler into its final location, it is important to make sure you have

the proper electrical connection:

A standard electrical supply (115 V, 60Hz), properly grounded in accordance with the National

Electrical Code and local codes and ordinances, is required.

The fuse (or circuit breaker) size should be 15 Amps.

Recommended Grounding Method

For your personal safety, this appliance must be grounded. It is equipped with a power

supply cord that has a 3-pronged grounding plug. To minimize possible shock hazard, the

cord must be plugged into a mating 3-pronged wall socket, and grounded in accordance

with the National Electrical Code and local codes and ordinances. If a mating wall socket

is not available, it is the personal responsibility of the customer to have a properly

grounded, 3-prong wall receptacle installed by a qualified electrician.

Leveling the Wine Cooler

It is important for the wine cooler to be leveled in order to work

properly. It can be raised or lowered by rotating the plastic sheaths

around each of the feet on the bottom of the machine. If you find that

the surface is not level, rotate the feet until the wine cooler becomes

level. You may need to make several adjustments to level it. We

recommend using a carpenter’s level to check the machine.

1. Place a carpenter’s level on top of the product to see if the wine

cooler is level from front to back and side to side.

2. Adjust the height of the feet as follows:

Turn the leveling feet to the right to lower that side of the

refrigerator.

Turn the leveling feet to the left to raise that side of the refrigerator.

Tip: Use a surge protector to protect your wine cooler from electrical surges.

Operation

Installation Check List Before Operation

1. Have all packing materials and tape been removed from the interior and exterior of the

wine cooler?

2. Have the installation instructions been followed, including connecting the machine to

electricity, and has proper grounding been installed for the wine cooler?

3. Has the machine been leveled?

4. Is the wine cooler in a site where the ambient temperature is around 78° F all year round?

5. Is there a clearance of at least 5” at the rear, 3” at the top, and 3” at the sides for proper

air circulation?

Adjusting the Temperature

Internal Control Box

You may adjust the temperature of the wine cooler using the temperature control knob

inside of the unit. Turn and adjust the knob until you reach your desired temperature. The

wine cooler has a temperature range of 52° F to 64° F. Whether your wine cooler can

reach the actual set temperature depends on the ambient environmental conditions.

Turn the temperature knob to your left to increase the temperature and to the right to

decrease the temperature.

Press the light switch to turn the inner light on or off.

Note:

 Allow at least 24 hours before storing your wines to allow the temperature to acclimate.

 Radio devices may interfere with the touch sensitive controls and cause the temperature

settings to change. Move radio devices away from the wine cooler.

Otros manuales para TWR282S

Tabla de contenidos

Otros manuales de Electrodoméstico de cocina de EdgeStar

EdgeStar

EdgeStar Koldfront TWR327ESS Manual de usuario

EdgeStar

EdgeStar KC2000SSTWIN Manual de usuario

EdgeStar

EdgeStar TWR125SS Manual de usuario

EdgeStar

EdgeStar CWR1660SZ Manual de usuario

EdgeStar

EdgeStar TWR282S Manual de usuario

EdgeStar

EdgeStar TWR282S Manual de usuario

EdgeStar

EdgeStar BWC71SS Manual de usuario

EdgeStar

EdgeStar KC2000 Manual de usuario

EdgeStar

EdgeStar CWR462DZ Manual de usuario

EdgeStar

EdgeStar Koldfront TWR6S Manual de usuario

EdgeStar

EdgeStar Koldfront TWR4BL Manual de usuario

EdgeStar

EdgeStar CWR1553DD Manual de usuario

EdgeStar

EdgeStar CWBD1760FD Manual de usuario

EdgeStar

EdgeStar KC3000 Manual de usuario

EdgeStar

EdgeStar CWR261DZ Manual de usuario

EdgeStar

EdgeStar CWR1102DZ Manual de usuario

EdgeStar

EdgeStar TWR210EBL Manual de usuario

EdgeStar

EdgeStar AWC151DZ Manual de usuario

EdgeStar

EdgeStar Wine Cooler TWR215ESS Manual de usuario

EdgeStar

EdgeStar AFR151SS Manual de usuario

EdgeStar

EdgeStar TWR121ES Manual de usuario

EdgeStar

EdgeStar BWR301BL Manual de usuario

EdgeStar

EdgeStar CWB8420DZ Manual de usuario

EdgeStar

EdgeStar CWR182SZ Manual de usuario

Manuales populares de Electrodoméstico de cocina de otras marcas

Tayama

Tayama TYG-35AF Manual de usuario

AEG

AEG 43172V-MN Manual de usuario

REBER

REBER Professional 40 Guía del usuario

North American

North American BB12482G / TR-F-04-B-NCT-1 Manual de usuario

Presto

Presto fountain popper Manual de usuario

Westmark

Westmark 1035 2260 Manual de usuario

Zanussi

Zanussi ZCG64396XA Manual de usuario

HOFFEN

HOFFEN SM-9302M Manual de usuario

Philips

Philips HD3133 Manual de usuario

Ronco

Ronco Beef Jerky Manual de usuario

Hendi

Hendi 470411 Manual de usuario

Livoo

Livoo MEN386 Manual de usuario

Vogue

Vogue D446 Manual de usuario

croydon

croydon WR-10313-700 Manual de usuario

ADE

ADE AUTOMATIC-L Manual de usuario

Chefman

Chefman RJ43-SQ Series Manual de usuario

Vacmaster

Vacmaster VP680 Manual de usuario

Jetmaster

Jetmaster 900HG Manual de usuario