Edelbrock 2186 Manual de usuario
Catalog #2186, 2191, 7186, 7193
Rev. 3/05 - RS/mc ©2005 Edelbrock Corporation
Brochure #63-0118Page 1of 3
Performer and Performer RPM Intake Manifolds
For Big Block Chrysler V8 Engines
Catalog #s 2186, 2191, 7186, & 7193
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and
procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this
installation, it is recommended to have the installation completed by a mechanic. If you have any questions or problems, please call our Technical
Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at[email protected]..
PLEASEcomplete and mail your warranty card. Be sure to write the model number of this product in the "Part #____" space. THANK YOU.
•DESCRIPTION:
Edelbrock Performer series intake manifolds are designed for engines operating in the idle to 5500 rpm range. Performer RPM series intake
manifolds are designed for engines operating in the 1500-6500 rpm range. Match Performer or Performer RPM intake manifolds with
recommended carburetors and additional equipment for even greater performance increases.
APPLICATIONS:
INTAKE MANIFOLD REFERENCE APPLICATION
2186 B, C Performer 383: Designed for street 361-383-400 c.i.d. Chrysler V8s that measure 7.75”
across the block. Includes pipe plugs to block EGR for non-EGR applications.
2191 B, C Performer 440: Designed for street 413-426-440 c.i.d. Chrysler V8s that measure 8.75”
across the block. Will not fit 1962-1964 Max Wedge cylinder heads. Includes pipe plugs
to block EGR for non-EGR applications.
7186 A, C Performer RPM 383: Designed for street 361-383-400 c.i.d. Chrysler V8s that measure
7.75” across the block. High flow runner design will handle popular stroker
combinations. Will not fit 1962-1964 Max Wedge cylinder heads.
7193 A, C Designed for street 413-426-440 c.i.d. Chrysler V8s that measure 8.75” across the
block. High flow runner design will handle popular stroker combinations. Will not fit
1962-1964 Max Wedge cylinder heads.
A-Not legal for sale or use on pollution controlled motor vehicles.
B-Stock replacement/street legal in some applications. See “Stock Replacement Parts List for Intake Manifolds” insert, or Catalog for details.
C-Available in additional finishes, such as polished, PermaStar, or EnduraShine. See Catalog for details.
•EGR SYSTEMS: Edelbrock EGR-equipped Performer manifolds are intended as a direct functionally identical replacement for their O.E.M.
counterparts. All exhaust emissions or emissions related stock components are intended to be retained and functional. Performer RPM intake
manifolds will not accept stock EGR (Exhaust Gas Recirculation) equipment. EGR systems are used on most 1972 and later model vehicles.
Check local laws for requirements. Performer manifolds #2186 and 2191 are packaged with 2 pipe plugs. Install these plugs into the EGR
pad if an EGR valve will not be used in your application.
•ACCESSORIES & INSTALLATION ITEMS: Major recommendations are listed below. See our catalog for details. To order a catalog, call
(800) FUN-TEAM, or visit www.edelbrock.com.
Catalog #2186, 2191, 7186, 7193
Rev. 3/05 - RS/mc ©2005 Edelbrock Corporation
Brochure #63-0118Page 2of 3
•CARBURETOR RECOMMENDATIONS:
Manifold 2186, 2191 (Emissions Controlled Applications):
Manifold 2186, 2191 (Non-Emissions):
Manifold 7186, 7193 (Non-Emissions):
•THROTTLE BRACKETS: Due to the design of Performer manifolds, the throttle and kickdown bracket on some vehicles may require
modification to fit.
•GASKETS: Do not use competition style intake gaskets for this street manifold. Due to material deterioration over time, internal leakage of
vacuum, oil, and coolant may occur.
A-Carburetor will work with non-EGR or pre-emission control systems.
B-Carburetor will work with EGRsystem.
C-Carburetor has provision for evaporative canister.
D-Carburetor has no provisions for evaporative canister.
E-Carburetor requires #8008 or #8024 stud, washer and nut kit. Determine proper length based on gasket thickness and your accessory
mounting requirements.
F-Carburetor accepts factory cruise control
G-Carburetor comes with manual choke. It can be converted to electric choke using kit #1478.
CARBURETOR REFERENCE PARTS REQUIRED FOR INSTALLATION
Performer #1407 (750 cfm) A, D, E, F, G #1481 or 1843 Chrysler throttle lever adapter
Performer #1411 (750 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Performer #1412 (800 cfm) A, D, E, F, G #1481 or 1843 Chrysler throttle lever adapter
Performer #1413 (800 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Thunder Series #1812 (800 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Thunder Series #1813 (800 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
CARBURETOR REFERENCE PARTS REQUIRED FOR INSTALLATION
Thunder Series #1805 (650 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Thunder Series #1806 (650 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Thunder Series #1825 (650 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Thunder Series #1826 (650 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Performer #1407 (750 cfm) A, D, E, F, G #1481 or 1843 Chrysler throttle lever adapter
Performer #1411 (750 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Performer #1412 (800 cfm) A, D, E, F, G #1481 or 1843 Chrysler throttle lever adapter
Performer #1413 (800 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Thunder Series #1812 (800 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Thunder Series #1813 (800 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
INTAKE MANIFOLD REFERENCE RECOMMENDED GASKET
2186, 2191, 7186, 7193 AEdelbrock #7225 Port: 1.23” x 2.27”, .030” Thickness
NOTE: To ensure maximum performance and a proper seal, Edelbrock gaskets which are
specifically designed and manufactured for use with Edelbrock parts must be used.
A-Must be used with OEM style valley pan.
CARBURETOR REFERENCE PARTS REQUIRED FOR INSTALLATION
OEM 4BBL B, C, F
Catalog #2186, 2191, 7186, 7193
Rev. 3/05 - RS/mc ©2005 Edelbrock Corporation
Brochure #63-0118Page 3of 3
INSTALLATION INSTRUCTIONS
1) Use only recommended intake gaskets set when installing this intake manifold.
2) Fully clean the cylinder head intake flanges and the engine block end seal surfaces.
3) Use a factory style valley pan along with the recommended gaskets.
4. Apply Edelbrock Gasgacinch sealant P/N 9300 to both cylinder head flanges and to the cylinder head side of the gaskets, allow to air dry, and
attach the intake gaskets.
5) Install the intake manifold and hold-down bolts. Torque all of the manifold bolts in two steps by the sequence shown in Figure 1 to 25 ft/lbs.
•PREP AND TUNING FOR POWER:
NOTE: Local emission laws must be checked for legality of any carburetor or ignition changes.
Performer Series Intake Manifolds
1. The long equal length runners in the Performer manifold create a very strong signal to the carburetor. In some applications, the stock
rods or jets may need changing for best overall performance. Refer to your carburetor owner's manual for details.
2) Performer manifolds deliver excellent drivability and power utilizing stock distributor settings. Some applications may benefit from
resetting the initial advance ±2° from the factory specification.
3) Aftermarket ignitions and more aggressive advance curves may be used with Performer packages.
4) Installation of aftermarket headers or camshafts may lean the carburetor calibration. Should this occur recalibrate with a richer jet.
Performer RPM Series Intake Manifolds
1. Due to design, the fuel / air mixture and cylinder charging are very efficient with Performer RPM manifolds. Generally speaking, the stock
jetting for a Performer or Thunder Series carburetor will not need changing. Specific applications may show an increase in power by
tuning the fuel mixture.
2. Aftermarket distributor curve kits may be used with Performer RPM series manifolds.
3. Use modified or high performance cylinder heads such as our Performer RPM, and port-match the manifold to the heads.
4. The compression ratio should be at least 9.5 to 1 to work properly with Performer RPM camshafts.
5. Installation of aftermarket headers, camshafts or both with an Edelbrock Performer RPM series manifold may lean carburetor calibration.
Should this condition occur, recalibrate with a richer jet.
•CAMSHAFT AND HEADERS: Performer Series manifolds are compatible with aftermarket camshafts and headers designed to work in the
idle-5500 rpm range. Edelbrock has developed a dyno-matched, street proven camshaft (#2192 for 383-440 c.i.d. engines) for use with
Performer Series intake manifolds. Header primary tube diameter should be 1-3/4". Performer RPM Series manifolds are compatible with
aftermarket camshafts and headers designed to work in the 1500-6500 rpm range. Edelbrock has developed a dyno-matched, street proven
camshaft (#7194 for 383-440 c.i.d. engines) for use with Performer RPM manifolds (see catalog for details). Header primary tube diameter
should be 1-7/8".
Figure 2 - 361-440 c.i.d. Chrysler Intake Manifold Torque Sequence
Torque Bolts to 25 ft/lbs.
Firing Order 1-8-4-3-6-5-7-2
Turn Distributor Clockwise to Advance Timing
2
75
31
86
4
7
3
15
8
4
2
6
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Pieza de automóvil de Edelbrock
Edelbrock
Edelbrock Later Harley-Davidson 1604 Manual de usuario
Edelbrock
Edelbrock Performer 70011 Manual técnico
Edelbrock
Edelbrock 1711 Manual de usuario
Edelbrock
Edelbrock 70003 Manual de usuario
Edelbrock
Edelbrock 15002 Manual de usuario
Edelbrock
Edelbrock 66792 Manual de usuario
Edelbrock
Edelbrock Chevrolet/GMC Trucks 454 SS Manual de usuario
Edelbrock
Edelbrock 60509 Manual de usuario
Edelbrock
Edelbrock Russell 694540 Manual de usuario
Edelbrock
Edelbrock 1100 Manual de usuario
Edelbrock
Edelbrock Chevrolet 1500-6500 Manual de usuario
Edelbrock
Edelbrock 6652 Manual de usuario
Edelbrock
Edelbrock Performer-Plus 2172 Manual de usuario
Edelbrock
Edelbrock 5224 Manual de usuario
Edelbrock
Edelbrock 66002 Manual de usuario
Edelbrock
Edelbrock Honda/Acura B-Series 4730 Manual de usuario
Edelbrock
Edelbrock Victor Glidden 18 2858 Manual de operación y mantenimiento
Edelbrock
Edelbrock 1803 Manual de usuario
Edelbrock
Edelbrock 7880 Manual de usuario
Edelbrock
Edelbrock 63-0081 Manual de usuario
Manuales populares de Pieza de automóvil de otras marcas
ICI
ICI Magnum FBM10DGN Manual de usuario
Volant Perfomance
Volant Perfomance 19435 Manual de usuario
BENDIX
BENDIX GEN 4 GEN 5 ABS Manual de usuario
Vintage Air
Vintage Air 571065 Manual de usuario
Rugged Ridge
Rugged Ridge 11503.13 Manual de usuario
BENDIX
BENDIX CYCLONE DURADRAIN TRAILER WATER Manual de usuario
