6. Instructions for Manual Programming
MENU and submenus:
•!”addr”: DMX mode (A001-A512)
•!“Chnd”: Selects between 5-channel and 9-channel DMX modes
•!“SLmd”: Selects between Master/Slave modes (MASt, SL 1, SL 2)
•!”Shmd”: Selects different preset modes within the following submenu:
•“Sou1”: Sound activated (slowly color fades when no sound)
•“Colo”: Solid color (see Color Presets map on opposite page)
•“StCo”: Strobe (0-255 speed); uses color from “Colo” selection
•“FAde”: Fading color changes (speeds 1-8, 1 is fastest)
•!”LEd”: On/off, selects whether LED display constantly displays mode
•!”dISP”: reverses the orientation of the text on the LED display
•!”MAnu”: adjusts global master color levels of the unit (for all modes
including DMX use) as follows:
•“rEd”: 0-255
•“Gree”: 0-255
•“bLue”: 0-255
•“AMbe”: 0-255
•“WhIt”: 0-255
•!”teSt”: sequentially lights each color at full brightness (disregarding the
‘manual’ global master color setting in order: R, G, B, A, W, full
•!”FhrS”: machine use time
Press MENU to navigate through the main menu. Press ENTER to access
one of the submenus, or the selectable options for that menu item. Once a
desired setting has been set, press ENTER, and wait for a time-out/black-
out period before the light returns to normal operation with that setting
saved. Options are saved even when the power is cycled. For example, if
you want to choose DMX mode A001, operate as follows:
•Press MENU, to bring up the main menu
•Press UP / DOWN or MENU until “addr” is selected
•Press ENTER to choose, the display will blinking
•Press UP / DOWN to change the address code to select “A001”
•Press ENTER to select and store the current menu option. DMX mode
will be stored automatically and the screen will stop blinking.
