Ectaco TL-2B&FreeML320 - Bulgarian - Talking Electronic... Manual de usuario
ECTACO Universal Translator™ ML320
10-Language Dictionary
English, Czech, Finnish, French, German,
Italian, Polish, Russian, Spanish, Turkish
User’s Manual
Ectaco, Inc. assumes no responsibility for any damage or loss
resulting from the use of this manual.
Ectaco, Inc. assumes no responsibility for any loss or claims by third
parties which may arise through the use of this product.
Ectaco, Inc. assumes no responsibility for any damage or loss
caused by deletion of data as a result of malfunction, repairs, or
battery replacement. Be sure to back up all important data on other
media to protect against its loss.
The contents of this manual are subject to change without notice.
No part of this manual shall be reproduced, stored in a retrieval
system, or transmitted by any means, electronic, mechanical,
photocopying, recording, or otherwise, without permission from
Ectaco, Inc.
Universal Translator™ is a trademark of Ectaco, Inc.
Copyright © 1990-2004 Ectaco, Inc., New York, USA.
All rights reserved.
2
Introduction
Features
♦ Dictionary of 55,000 words
♦ Multilingual phrasebook
♦ Instant translation into any of 10 languages
♦ Phone book
♦ Calculator
♦ Metric conversions
♦ Currency exchange
♦ Local and World time
♦ Alarm
♦ Multilingual interface
As continuous efforts are made by the
manufacturer to ensure a better quality and
performance of the Universal Translator™
products, some characteristics or the design of the
actual device you purchased may slightly differ
from their description in this manual.
Overview
Your Universal Translator™ ML320 is a portable device
with the keyboard and 2 lines x 12 chars LCD screen.
LCD marks and their meanings
scroll left or right is available
▲scroll up is available
▼scroll down is available
alarm is ON
3
♫key tone is ON
low batteries
SHIFT the
SHIFT key is pressed
INS the Insert editing mode is set
Auto Shutoff
If you forget to turn the device off, it will automatically
shut off in three minutes. When you turn the device on,
operation resumes in the current section.
Key Guide
Functions keys
ON/OFF Turn the device on or off
LANG Change the interface/source or target
language
PHRASES Go to Phrasebook
PHONES Go to Phone Book
DICT Go to Main Dictionary
MENU Go to Main Menu
ENTER Select a menu item, accept the
changes, calculate
ESC Go one step back
SHIFT Access the secondary command or
key, or accented letters
Enter space
Language keys
The Direct Language Keys (English, Czech, Finnish,
French, German, Italian, Polish, Russian, Spanish,
and Turkish) are marked above the first keyboard row.
4
Accents input
First, choose a letter of the English alphabet (or
Russian letter Ъ, Э, Ю) on the keyboard and press the
corresponding key, then keep pressing SHIFT until the
desired letter appears on the screen.
These letters can be entered according to the following
sequence:
Czech: AÁ; CČ; DĎ; EÉĔ; Iĺ; NŇ; OÓ; RŘ; SŠ; TŤ;
UÚŮ; YÝ; ZŽ
Finnish: AÅÄ; OÖ
French: AÀÂ; CÇ; EÈÉÊË; IÎÏ; OÔŒ; UÙÛ
German: AÄ; OÖ; Sß; UÜ
Italian: AÀ; EÈÉ; IÌ; OÒ; UÙ
Polish: AĄ; CĆ; EĘ; LŁ; NŃ; OÓ; SŚ; ZŹŻ
Russian: according to the keyboard marks along with
ХЪ; ЖЭ; БЮ
Spanish: AÁ; EÉ; IÍ; NÑ; OÓ, UÚÜ
Turkish: AÂ; CÇ; GĞ; Iİ; OÖ; SŞ; UÜ
Navigation and Editing Keys
◄– move cursor or scroll left
►– move cursor or scroll right
▲– scroll the entry up
▼– scroll the entry down
SHIFT+◄(BS) – delete the symbol or record
SHIFT+ ►(EDIT) – edit the selected entry
SHIFT+▲– insert symbol – press the corresponding
numeric key (0 to 5), use ▼/▲to scroll the list of
symbols
5
SHIFT+▼– switch the Insert/Overwrite mode
– page through the entries up
– page through the entries down
Numeric and Calculator Keys
Allows numbers and math operations input.
Getting Started
Press the ON/OFF button.
When you turn the device on for the first time,
press Y while the INITIALIZE! prompt is displayed.
Interface Language
Select the interface (source) and the target languages:
1. Press the
LANG key.
English
Russian
2. Press ◄or ►, or the desired Direct Language Key
to choose the interface language.
3. Press ▼to select the target language field.
4. Press ◄or ►, or the desired Direct Language Key
to choose the target language.
English
Spanish
5. Press
ENTER.
If the interface (source) and target languages are
the same, you will hear a warning beep.
6
Main Menu
The Main Menu is displayed with the following items:
1. Dictionary.
2. Phrases.
3. Phone book.
4. Clock.
5. Calculator.
6. Setup.
Use the Navigation keys to scroll the Main Menu items
and ENTER to open the desired section.
Every numbered menu item could be accessed by
pressing the corresponding numeric key. For
example, press 2 to open the 2.Phrases section.
Main Dictionary
Select 1.Dictionary from the Main Menu or press the
DICT key.
1. Select the source and the target languages by
pressing the LANG key.
2. Start typing the word you want to translate. The
advanced word recognition function locates and
displays matches starting with the letters you key in.
Enter the whole word if you don't see the correct
match provided by advanced word recognition.
FUTUR_
FUTURE
7
3. When the desired word appeared on the screen,
press ENTER to display its translation.
FUTURE >
FUTURO [N]
If the word you have entered is not found in the
dictionary, you will see the translation of the word
shown on the second line of the screen.
4. Use the ▼or ▲buttons to scroll the translation, if
necessary.
5. Press or to page through the entries list.
6. To obtain the translation of the desired word in
another language, press the corresponding Direct
Language Key. For example, press RUSSIAN to
see the Russian translation of the word:
FUTURE >
БУДУЩЕЕ [N]
7. Press the
LANG key to change the source or target
language.
8. Press
ESC to return to the input screen.
Translations are marked with the following grammatical
labels representing part of speech: A– adjective;
ABBR – abbreviation; ADV – adverb; ART – article;
CONJ – conjunction; INTRJ – interjection; N– noun;
NUM – numeral; PART – particle; PREP – preposition;
PRON – pronoun; V– verb. These are given in square
brackets.
8
French and German nouns are marked with the
following gender and number labels: F– feminine; M –
masculine; N– neuter; PL – plural, FPL – feminine or
plural, MPL – masculine or plural, MF – masculine or
feminine, MN – masculine or neuter, NF – neuter or
feminine. Gender and number labels are given in
parentheses.
Phrases
Select 2.Phrases from the Main Menu or press the
PHRASES key.
1. Select a topic from the displayed list and press
ENTER.
I see. >
Je vois.
2. Press ▼or ▲to scroll the entry, if necessary.
3. To obtain the translation of the desired phrase in
another language, press the corresponding Direct
Language Key.
4. Press the
LANG key to change the source or target
language.
5. Press or to page through the entries within
the chosen topic.
6. Press
ESC to return to the topics list.
9
Phone Book
Select 3.Phone book from the Main Menu or press the
PHONES key.
Adding an Entry
1. Type a name in the Name field and press ENTER or
▼.
Name:
JOHN_
2. Type an e-mail address and press ENTER or ▼.
Press SHIFT + 0…9 to input a numeric value.
3. Type a telephone number in the Phone field and
press ENTER to save the record. You can also
press or in any field.
4. If you press ESC and see the Save (Y/N)? message
on the screen, press Y to save your record.
Viewing the Phone Book
To browse the record list, press or . Use ▼or ▲
to scroll through the content of the displayed record.
Press any key in the view mode to create a new
record.
Editing an Entry
To edit a record, press SHIFT+►while the record is
displayed.
10
Deleting an Entry
To delete a record, press SHIFT+◄while the record is
displayed. The Delete (Y/N)? message appears on the
screen. Press Y to confirm your intention or N to cancel.
Clock
Select 4.Clock from the Main Menu.
New York
03:47 PM
Press ◄or ►to scroll through the cities list. The
selected city and the current time in the corresponding
time zone will be displayed.
Calculator
Select the 1.Calculator option from the Calculator
menu. Use it as an ordinary pocket calculator.
Metric Conversion
Select the 2.Metric Conversion option from the
Calculator menu.
1. Select a unit of measure from the selection list.
2. Select one of the conversion types available in the
chosen category. Press ENTER.
ft->m
0.
3. Press ◄or ►to change the direction of
conversion.
4. Type a value for conversion and press ENTER.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Diccionario electrónico de Ectaco
Ectaco
Ectaco Language Teacher ET200D Manual de usuario
Ectaco
Ectaco Partner EF400T Deluxe Manual de usuario
Ectaco
Ectaco Partner X8 Manual de usuario
Ectaco
Ectaco Partner EPg400T Manual de usuario
Ectaco
Ectaco EHu600T Manual de usuario
Ectaco
Ectaco Partner EP-X8 Manual de usuario
Ectaco
Ectaco Partner ECS430T Manual de usuario
Ectaco
Ectaco Partner E500T Manual de usuario
Ectaco
Ectaco Partner EKS430T Manual de usuario
Ectaco
Ectaco Partner P900 Manual de usuario
Ectaco
Ectaco Partner AzER430T Manual de usuario
Ectaco
Ectaco Partner ERm400TX Manual de usuario
Ectaco
Ectaco Partner EFR430T Manual de usuario
Ectaco
Ectaco Partner EP-X8 Manual de usuario
Ectaco
Ectaco Partner P850 Manual de usuario
Ectaco
Ectaco ERm200D Manual de usuario
Ectaco
Ectaco iTRIVAL Series Manual de usuario
Ectaco
Ectaco Partner ER850 Manual de usuario
Ectaco
Ectaco Partner LUX2 Manual de usuario
Ectaco
Ectaco SpeechGuard 4G Manual de usuario
