ECS P6BAT-B Manual de usuario

Important Information

This publication, including all photographs, illustrations and software, is

Neither this manual, nor any of the material contained herein, may be

reproduced without the express written consent of the manufacturer.

Disclaimer

The information in this document is subject to change without notice.

The manufacturer makes no representations or warranties with respect

to the contents hereof and specifically disclaims any implied warranties

of merchantability or fitness for any particular purpose. Further, the

manufacturer reserves the right to revise this publication and to make

changes from time to time in the content hereof without obligation of the

manufacturer to notify any person of such revision or changes.

Trademark Recognition

Microsoft, MS-DOS and Windows are registered trademarks of Microsoft

Corp.

MMX, Pentium, Pentium-II, Pentium-III, Celeron are registered

trademarks of Intel Corporation.

VGA, OS/2, PS/2 are registered trademarks of International Business

Machines.

AMD, K5, K6 are registered trademarks of Advanced Micro Devices Inc.

Cyrix, M1 are registered trademarks of Cyrix Corporation.

Other product names used in this manual are the properties of their

respective owners and are acknowledged.

Version 1.5

Contents

Chapter 1: Introduction.............................................. 1

Welcome....................................................................... 1

About the Manual.......................................................... 2

Checklist ....................................................................... 3

Standard Items------------------------------------------------- 3

Recommendations........................................................ 3

Features........................................................................ 4

Chapter 2: Installation................................................ 7

Quick Installation Table ................................................ 7

Quick Jumper Setting Reference ................................. 8

Before You Begin.......................................................... 10

Static Electricity------------------------------------------------ 10

Choosing a Case---------------------------------------------- 10

How to Set Jumpers ------------------------------------------ 11

Preparing the Mainboard .............................................. 12

Mainboard Guide---------------------------------------------- 12

Check the Jumper Settings --------------------------------- 14

Install the Mainboard in the Case................................. 17

Connecting Power, Chassis Fans, and Panel---------- 19

Install Other Hardware.................................................. 21

Install the Processor------------------------------------------ 21

Installing a Slot1 Processor--------------------------------- 23

Installing a Socket-370 Processor ------------------------ 25

Install the Memory Modules -------------------------------- 27

Install a Hard Disk Drive and CD-ROM/DVD----------- 28

Installing a Floppy Diskette Drive ------------------------- 31

Using the Expansion Slots ---------------------------------- 32

Add-in Card Options------------------------------------------ 34

Install Extension Brackets and Modules----------------- 35

Chapter 3: Setup ......................................................... 41

About the Setup Utility .................................................. 41

Starting the Setup Utility -------------------------------------41

How to Flash a New BIOS-----------------------------------43

Standard CMOS Setup Option ..................................... 44

BIOS & CPU Features Setup Option............................ 45

Chipset Features Option............................................... 48

Power Management Setup Option ............................... 50

PNP/PCI Configuration Option ..................................... 53

Load BIOS Defaults Option .......................................... 54

Load Optimum Settings ................................................ 54

Integrated Peripherals Option....................................... 55

Supervisor and User Password Settings...................... 57

IDE HDD Auto Detection Option................................... 57

Save And Exit Setup Option ......................................... 58

Exit Without Saving Option........................................... 58

Chapter 4: Software.................................................... 59

About the Software ....................................................... 59

Folders for this Mainboard............................................ 59

Running the Support CD-ROM..................................... 61

Utility Folder Installation Notes ..................................... 61

CMI8X38 Folder Installation Notes............................... 62

Audio Software -------------------------------------------------62

Modem Driver and Software --------------------------------63

VIA Folder Installation Notes ........................................ 63

Mainboard (KOB 693 DCS) Installation Notes ............. 64

Appendix 1: Quick Jumper Setting Reference ........ 65

Welcome

Congratulations on purchasing the KOB 693 DCS mainboard. The

mainboard includes a Slot1 processor slot and a FC-PGA (Flip-Chip

Plastic Pin Grid Array) Socket-370 processor socket. This feature

means that you can install the mainboard with a Pentium-II or

Pentium-III cartridge, the SEPP (Single Edge Processor Package)

Celeron cartridge, or one of the new generation PGA Celeron or FC-

PGA Coppermine processors.

The KOB 693 DCS is a baby-AT sized mainboard that uses 4-layer

printed circuit board and measures 22cm x 22cm. The mainboard

features the VIA Apollo Pro Plus chipset. The KOB 693 DCS has a slot1

and a socket-370 so that it can be installed with either a slot1 processor

(SEPP Celeron, Pentium-II, Pentium-III) or a socket-370 processor (PGA

Celeron/FC-PGA Coppermine processor). The mainboard includes an

integrated audio system and a plug-in fax/modem module. The board

has an AGP slot for a graphics adapter, three PCI slots and one legacy

ISA slot. The mainboard has power connectors for both ATX and AT

power supplies, so that it can be installed in practically any kind of PC

case.

This chapter contains the following information:

 About the Manual explains how the information in this manual is

organized

 Checklist comprises a list of the standard and optional components

that are shipped with this mainboard

 Recommendations lists some Do’s and Don’ts from the

manufacturer to help ensure reliability and performance from this

product

 Features highlights the functions and components that make this

one of the best value mainboards on the market

About the Manual

The manual consists of the following chapters:

Introduction

Use the Introduction Chapter to learn about the features of the

mainboard, and the checklist of items that are shipped with the package.

Installation

Use the Installation Chapter to learn how to install the mainboard and

get your system up and running.

Setup

Use the Setup Chapter to configure the mainboard for optimum

performance.

Software

Use the Software Chapter to learn how to use the software drivers and

support programs that are provided with this mainboard.

Checklist

Compare the contents of your mainboard package with the standard

checklist below. If any item is missing or appears damaged, please

contact the vendor of your mainboard package.

Standard Items

 1 x KOB 693 DCS Mainboard

 1 x Cable/Bracket Pack

Diskette drive ribbon cable

IDE drive ribbon cable

 Parallel port extension bracket

 Serial ports extension bracket

 Audio ports extension bracket

 This User’s Manual

 Software Support CD-ROM Disc

Optional Items

 ATX Form Bracket (2 USB ports, IR port, PS/2 mouse port)

 Digital audio extension bracket

 V.90 Fax/modem module

Recommendations

This mainboard automatically determines the CPU clock frequency and

system bus frequency for the kind of processor that you install. You may

be able to change these automatic settings by making changes to

jumpers on the mainboard, or changing the settings in the system setup

utility. We strongly recommend that you do not overclock the mainboard

to run processors or other components faster than their rated speed.

Overclocking components can adversely affect the reliability of the

system and introduce errors into your system. Overclocking can

permanently damage the mainboard by generating excess heat in

components that are run beyond the rated limits.

Components on this mainboard can be damaged by discharges of static

electricity. Handle the board carefully holding it by the edges. Don’t flex

or stress the circuit board. Keep the board in its static-proof packing until

you are ready to install it. Follow the static guidelines given at the

beginning of Chapter 2.

Features

The key features of this mainboard are the wide range of processors that

can be installed, and the support for both AT and ATX power supplies.

Wide Choice of Processors

This mainboard provides an excellent platform for an inexpensive value

PC that is internet-ready thanks to the fax/modem module. The socket-

370 can be installed with a PGA Celeron or FC-PGA Coppermine

processor. The PGA Celeron has 32k of internal cache memory, 128K of

external cache memory, and operates over a 66 MHz system bus. The

PGA Celeron ships with clock speeds running from 300 MHz through to

533 MHz. The FC-PGA Coppermine operates over a 100 MHz system

bus. The FC-PGA Coppermine ships with clock speeds running from 500

MHz through to 750 MHz.

The PGA Celeron and FC-PGA Coppermine processors are the ideal

choice for an entry-level PC.

For better performance, the KOB 693 DCS can be installed with a slot1

processor. The SEPP (Single Edge Processor Package) Celeron is the

least expensive slot-1 processor. It has 32K of internal cache memory,

128K of external cache memory (except for older versions), and

operates over a 66 MHz system bus. SEPP Celerons ship with clock

speeds ranging from 266 MHz through to 533 MHz.

For higher-performance business-class computing, the slot1 can be

installed with a Pentium-II or Pentium-III processor cartridge. The

Pentium-II and Pentium-III have 32K of internal cache memory and 512K

of external cache memory. They operate over a 100 MHz system bus

(except for older Pentium II versions). The Pentium-III includes new

instructions that are designed to enhance multimedia/internet computing

by providing rapid encoding and decoding of the compressed audio and

video files which are pervasive in the internet environment. The Pentium-

II ships with clock speeds running from 233 MHz through to 450 MHz.

The Pentium-III ships with clock speeds of 450 MHz, up to 750 MHz, and

higher.

VIA Apollo Pro Plus Chipset

The VIA Apollo Pro Plus chipset is a high performance chipset that

ensures full support for Intel’s Slot1 and socket-370 processors. The

chipset supports 66 MHz and 100 MHz front side buses and SDRAM

memory installation of up to 768 MB. Support is provided for a 2x AGP

slot and two PCI IDE channels with Ultra DMA 33. The chipset is

compliant with the PC98/99 specifications.

Inexpensive Memory

The board has three DIMM sockets for the installation of 168-pin, 3.3V

non-buffered DIMM memory modules. The DIMM memory modules must

be installed with SDRAM memory chips. The board supports a memory

bus of 66 MHz or 100 MHz, so you can choose between inexpensive 66

MHz memory modules or high-performance PC-100 memory modules.

Each installed memory module can be populated with 8 MB up to 256

MB of memory, so a maximum total of 768 MB memory can be installed.

Highly Integrated Design

The ITE LPC I/O controller handles the mainboard’s I/O functions. The

CMI 8738/PCI C3DX is a two-chip solution that provides an integrated

audio and fax/modem system.

Built-in PCI 3D Sound

The system includes built-in PCI 3D audio support. The chip provides

Sound Blaster 16-bit-compatible audio, plus support for Microsoft’s

DirectSound 3D specification and Aureal A3D interface. The sound ports

include jacks for speakers, microphone and stereo in, and a game/MIDI

port. The audio system supports full duplex operation and drivers are

available for WIN 95/98 and WIN NT 4.0. The audio system can output

sound to 4 loudspeakers and also supports SPDIF 24-bit digital sound

input and output.

Built-in V.90 Fax/modem

The mainboard includes an integrated fax/modem. The fax/modem

supports 56 Kbps transmission using the V.90 protocol. The fax/modem

is integrated with the built-in audio system to support voice as well as

data transmissions. You must install a fax/modem module (with line and

telephone sockets) in order to use the integrated fax/modem.

Expansion Options

The board has plenty of expansion potential with one 2x AGP slot for an

AGP graphics adapter, three 32-bit PCI slots, and one legacy 8/16-bit

ISA slot. The ISA slot is shared with one of the PCI slots which means

that you can use either one of the slots but not both at the same time.

Integrated I/O

Using the ITE LPC I/O chip and the VIA Apollo Pro Plus chipset, the

board has a comprehensive set of integrated I/O ports. The I/O ports are

installed as connectors on the mainboard and can be installed on the

system case using extension brackets. The I/O ports include one PS/2

mouse port, a parallel port, two USB ports, and an infrared port. The

mainboard includes connections for floppy diskette drives and two PCI

IDE channels.

Keyboard Power On Feature

Using the system BIOS setup program, you can configure the system to

turn on using a keyboard-typed password. A green keyboard is not

required.

Hardware Monitoring

The system supports hardware monitoring so that monitoring software

applications can generate warnings if critical parameters, such as

voltages and temperatures, are exceeded

Programmable Firmware

The mainboard includes Award BIOS, which allows BIOS setting of CPU

parameters. The fully programmable firmware enhances the system

features and allows users to set power management, CPU and memory

timing, LAN and modem wake-up alarms, and so on. The firmware can

also be used to set parameters for different Celeron processor clock

speeds so that you don’t need to change mainboard jumpers and

switches.

Quick Installation Table

This chapter explains how to successfully install the mainboard into a

computer case and build a working system. The installation procedure is

as follows:

Quick Jumper

Setting Reference

Provides a quick reference for the jumper

settings on this mainboard.

Before you Begin Provides advice on choosing a case,

avoiding static electricity damage, and setting

jumpers.

Preparing the

Mainboard

Provides a guide to the mainboard and I/O

port locations, full details on the jumper

settings, and advice on installing the

mainboard in the system case.

Install Other

Hardware

Provides guidance on installing essential

hardware: processor, memory, hard disk

drive, CD-ROM, floppy disk drive, and

expansion cards.

Make the External

Connections

Provides advice on using the external I/O

ports to install peripheral devices such as a

keyboard, a monitor, a mouse, a printer,

loudspeakers, and so on.

Tabla de contenidos

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario