Eclipse TD307II Series Manual de usuario
Thank you for purchasing this speaker.
Please read this Owner's Manual before use.
Be particularly sure to read the Safety Instructions section before using the product.
Keep this Owner's Manual together with the warranty in a safe place for later reference.
OWNER'S MANUAL
Speaker for
Speaker for
Speaker
-
2
-
JAPANESE
ENGLISH GERMAN FRENCH ITALIAN SPANISH
This product is a speaker which has been designed using time domain theory.
Foreword
Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
For your safety in using this product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Cautions on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Part names and connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Installing the speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Adjusting the speaker base and speaker neck assembly positions . . . . . . . . . . . . . . . . . . . . . . 12
Adjusting the speaker angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Removing the protective net . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cleaning/Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Warranty and after-sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
[What is time domain theory? ]
Time domain recreates the changes that occur in sound waves over time from the moment of output until their
disappearance. Its purpose is to reproduce those sound waves that are as close as possible to the original
recorded sound. Time domain audio systems which use time domain theory to improve sound reproduction allow
sound orientation and the nuances that are added by recorded performers to be faithfully reproduced.
• Phillips screwdriver • Awl (or drill) • Scissors
• Tape
(Paper tape or similar)
• Screws (for securing speaker
base to ceiling) X 4 or more
• Screw (for securing drop-prevention
wire to ceiling) X 1
• Allen key
(Supplied with speaker, used
for speaker angle adjustment)
Tools used (for ceiling installation)
•
Have the following tools ready before commencing installation work.
Contents
Accessories
1Speaker X1 2Drop-prevention wire
(hole thread diameter 5.2 mm) X1
3Allen key
(For securing speaker) X1
4Allen key
(For speaker angle adjustment
and securing drop-prevention
wire to speaker) X1
5Owner's Manual X1 6Warranty 7Logo sticker X1
Before use
-
3
-
JAPANESE
ENGLISH GERMAN FRENCH ITALIAN SPANISH
The indicator symbols shown below are used in this manual and on the speaker to ensure proper
and safe use of the product, prevent injuries and avoid damage to surrounding items. Please
become familiar with these symbols and their associated information before proceeding to the
assembly instructions of this manual.
This "Warning" sign indicates a situation in which incorrect handling may
result in death or serious personal injury.
This " Caution" sign indicates a situation in which incorrect handling may
result in personal injury or may result solely in damage to property.
• If installing this unit high up off the floor, be sure to secure it adequately in place. If it is not
secured adequately, it may fall down and cause injury.
• Do not open the cabinet of this product. It may cause electric shocks or injury. Consult a
company customer service facility for interior inspection, adjustment or repair. In addition, do
not attempt to modify this product yourself. It may cause fire or electric shocks.
• Do not use the unit in bathrooms, in areas exposed to rain, or in humid conditions. It may
cause fire or electric shocks. Take care when using the unit in areas exposed to rain or snow,
on the sea shore, or near water. Do not place flower vases, potted plants, cups, cosmetics,
drugs, containers holding liquids, or small metal objects on or near this product.Do not insert
foreign objects or liquids into the unit as such actions can cause fire or electric shock. Do not
insert or drop metal or combustible objects or liquids into the cooling holes of this product.
Such actions can cause fire or electric shock. (Use particular care in households where
children are present.)
For your safety in using this product
• Place the unit on a level floor surface when assembling. If assembly is carried out on a surface
which is not level, the speaker may fall down and cause injury.
• Do not drop or drag this unit while assembling or carrying it. If it is dropped or dragged, it may
cause injury or damage to floor surfaces.
• Install this product securely on a level floor surface. If it is installed in an unstable location, it
may fall down and cause injury.
• Do not use the unit as a step or hanger. Take particular care of this children are around. It may
fall over or break and cause injury.
• After installing the speaker, periodically check the angle bracket and speaker bracket for any
looseness, and tighten them if required as a safety measure.
Caution
Warning
Warning
Caution
-
4
-
JAPANESE
ENGLISH GERMAN FRENCH ITALIAN SPANISH
■Always be sure to minimize the volume before turning on the power and before switching input.
Sudden high volume output can damage the connected speaker system.
■Even pleasant music can be a disturbance at times. To avoid disturbance in your neighborhood,
enjoy your unit at an appropriate volume. Remember that at night, even low volume carries into
surrounding areas.Help to maintain a pleasant living environment.
■Always be sure to turn off the power for the amplifier before connecting speaker systems. If a
speaker wire is inadvertently shorted, the protection circuit in the amplifier will operate, and audio
output will stop temporarily.In this event, disconnect the amplifier's power cord from the outlet,
correct the shorted area and reconnect the power cord to the outlet.
■Be careful not to let this product fall over.
■Clean this product by wiping it gently with a soft cloth moistened in neutral detergent.Do not use
liquid solvents such as alcohol or thinner to clean this product.
Cautions on use
When connecting the speaker wires, insert the ends of the speaker wires correctly so that they do not touch
neighboring terminals, otherwise it may cause short-circuits.
-
5
-
JAPANESE
ENGLISH GERMAN FRENCH ITALIAN SPANISH
Part names and connections
If the speaker wires are routed through the wire holes in the speaker base and speaker neck, they will not easily
visible from outside which will improve the outer appearance of the speaker. (For speaker wires with a diameter
of less than 7 mm) If the diameter of the speaker wires is 7 mm or more, the wires will not pass through the
speaker neck and so you should route them outside the neck.
Speaker wire
Wire hole
Speaker wire
(for diameter of less than 7 mm)
Tip
(Black) (Red)
Speaker base
Speaker unit
Speaker neck
Speaker input terminals
Caution
Tip
-
6
-
JAPANESE
ENGLISH GERMAN FRENCH ITALIAN SPANISH
Ceiling
Wall
Leave enough
space.
Speaker wire
(7 mm diameter or more) Speaker wire (for diameter
of less than 7 mm)
Installing the speaker
This speaker can be installed and used on a floor, and it can also be installed to a ceiling or wall. If installing to a
ceiling or wall, use screws (sold separately) to install it and also be sure to install the drop-prevention wire.
Example 1.
Example 3.
0˚ - 30˚
60˚ - 90˚
Speaker wire (7 mm
diameter or more)
Speaker wire
(for diameter of less
than 7 mm)
Ceiling
Wall Leave
enough
space.
Speaker wire
(7 mm diameter or more)
Speaker wire
(for diameter of less
than 7 mm)
Leave enough
space.
35˚ - 90˚
Ceiling
Wall
0˚ - 55˚
Speaker wire
(for diameter of
less than 7 mm)
Leave
enough
space.
Ceiling
Wall
Caution
Ci
Tip
• Be sure to read this owner's manual thoroughly before carrying out installation and connecting the wires.
• If installation methods or non-standard parts not specified in this owner's manual are used, accidents or injury
may result.
• Specialized knowledge is required in order to install the speaker to a ceiling or wall. Ask a qualified technician
to install the speaker in such cases.
• Installation of the speaker should always be carried out by two or more people.
• The screws to be used for installing the speaker and drop-prevention wire to a ceiling are not included with the
speaker. (Speaker installation hole diameter: 7 mm)
Caution
Example of installation to a ceiling or wall Tip
• The forward/back direction of the base will be reversed.
• In the case of example 2 and example 4, it will be necessary to adjust the assembly positions of the speaker
base and speaker neck. Refer to page 12 for details on changing the assembly positions.
Tip
Be sure to leave some space in between the speaker and the wall so that the speaker and wall do not touch.
Speaker
Example 2.
Example 4.
Caution
Ci
Caution
Speaker wire
(7 mm diameter
or more)
Remove the hexagon head screw which is used for
securing the base cover drop-prevention wire from
the speaker base.
3
The hexagon head screw which is removed will be
used later. Be careful not to lose the hexagon head
screw after removing it.
Remove the base cover.
2
-
7
-
JAPANESE
ENGLISH GERMAN FRENCH ITALIAN SPANISH
Remove the screws from the bottom of the speaker
base.
1
Base cover
Base cover drop-prevention wire
Hexagon
head screw
Speaker base
Screws x3
The screws which are removed will not be used.
Give them to the customer to keep safely.
Speaker base
Speaker neck
Washer
Hexagonal nut
Speaker unit
Remove the speaker neck from the speaker unit.
5
The speaker unit is heavy, so use care when
removing it.
Remove the hexagonal nut and washer which are
securing the speaker unit and speaker neck
together.
4
Tip
Tip
Caution
Use the speaker base to determine the speaker
installation position on the ceiling inside the room,
and then use an awl or similar tool to mark the
positions of the speaker base mounting holes on
the ceiling.
7
Steps (7) and after are be followed when using installation example 1 or example 3. Furthermore, the diagram
shows example 1. For example 2 and example 4, refer to the installation example shown in step 6, and make
sure that the speaker base is facing the right way and that the speaker wires are positioned correctly.
7
Tip
Install the drop-prevention wire to the speaker unit.
6
• Attach the drop-prevention wire securely to the
speaker so that the speaker will not fall down.
• Use the hexagonal head bolt and washer which
were removed from the speaker earlier to secure
the wire to the speaker.
Caution
-
8
-
JAPANESE
ENGLISH GERMAN FRENCH ITALIAN SPANISH
Approx.
8 in.
(20 cm)
Washer
Hexagonal
head bolt Wire
2
Speaker unit
Speaker wire
(7 mm diameter or more)
Speaker wire
(for diameter of less
than 7 mm)
Speaker base
Make marks for the speaker base mounting holes.
When marking the positions of the speaker base
mounting holes on the ceiling, attach the speaker
base to the ceiling with tape to make working
easier.
Tip
Remove the speaker base from the ceiling.
8
-
9
-
JAPANESE
ENGLISH GERMAN FRENCH ITALIAN SPANISH
• When installing the speaker base to the ceiling or
wall, vary the positions and number of screws used
in accordance with the strength of the ceiling or wall
and the locations of beams.
• When installing the speaker base to the ceiling or
wall, use the slits indicated by to insert the
screws (sold separately).
• When installing the speaker base to the wall or
ceiling, provisionally attach the speaker base to the
ceiling with tape to make work easier.
Speaker base
Screws (sold separately)
Install the speaker base at the speaker installation
position using the screws (sold separately).
9
• Install the speaker neck and speaker base
securely so that the speaker will not fall down.
• The screws which are used to install the speaker
to the ceiling or wall are not provided with the
speaker, so purchase them separately.
• When installing the speaker base to the ceiling or
wall with the screws, do not tighten the screws too
tightly, otherwise it will bend the speaker base and
it may not be possible to attach the base cover.
Caution
Tip
Speaker base Slits for securing
speaker base (width
0.2 in. [5 mm])
When connecting the speaker wires, insert the ends
of the speaker wires correctly so that they do not
touch neighboring terminals, otherwise it may cause
short-circuits.
-
10
-
JAPANESE
ENGLISH GERMAN FRENCH ITALIAN SPANISH
Speaker wire
Speaker wire
For diameter of less than 7 mm
7 mm diameter or more
Speaker input
terminals
Speaker input
terminals
Speaker base
Speaker base
Route the speaker wires.
10
Securely install the speaker neck to the speaker
unit.
11
• To make it easier to connect the speaker wires to
the speaker, leave about 8 inches (20 cm) of
speaker wire hanging out.
• The speaker wires can be passed through the
speaker base and the speaker neck which will
improve the outer appearance of the speaker. (for
diameter of less than 7 mm)
Tip
Connect the speaker wires to the speaker input
terminals.
12
Speaker wire
(7 mm diameter or
more) Speaker wire
(for diameter of
less than 7 mm)
Speaker neck
Washer
Hexagonal nut
Speaker unit
Caution
Otros manuales para TD307II Series
1
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Oradores de Eclipse
Eclipse
Eclipse D5II Guía de inicio rápido
Eclipse
Eclipse TD307MK2A Manual de usuario
Eclipse
Eclipse TD712z MK2 Manual de usuario
Eclipse
Eclipse TD510ZMK2 Manual de usuario
Eclipse
Eclipse TD508MK3 Manual de usuario
Eclipse
Eclipse TD508II Manual de usuario
Eclipse
Eclipse 512 Manual de usuario
Eclipse
Eclipse SE8235 Manual de usuario
Eclipse
Eclipse TD508II Manual de usuario
Eclipse
Eclipse 508DMK3 Manual de usuario
