Eclipse Security Nubix DX Manual de usuario
Warning!
The Nubix DX comes locked from factory. You must
unlock the system using the instructions below.
1. Connect power cable
2. Press the power button and then press the "0" button eight times and Enter Button Î The
system will boot up
3. Next press the ‘Lock button’ on the front panel and press the "0" button eight times (ID: 00,
PW: 000000) to release the system lock. You may now enter the System Menu.
Nubix DX Client Quick Setup Guide
Please read this before installing
1. Please connect your new Nubix DX to your network before
attempting to connect via the client software.
2. Have your network specialist or network administrator assign a
local IP to the Nubix DX.
3. The default ports for the Nubix DX are port 80 for the IE Web
browser client and ports 2710 and 2711 for the remote client
software.
4. Your network administrator or network specialist must open
these ports on the router to allow remote viewing via the
WAN.
Please use the diagrams enclosed to setup your DX Client
software for the first time.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
Otros manuales de DVR de Eclipse Security
Eclipse Security
Eclipse Security ECL-CVDVR32 Manual de usuario
Eclipse Security
Eclipse Security 4 Channel Premium DVR Manual de usuario
Eclipse Security
Eclipse Security ECL-NVR16 Manual de usuario
Eclipse Security
Eclipse Security Nubix HD Series Manual de usuario
Eclipse Security
Eclipse Security Nubix Manual de usuario
Eclipse Security
Eclipse Security Tribrid Manual de usuario
