ECI XDM-300 Manual

XDM®-300

Installation and Maintenance Manual

Version 7

417006-2311-0H3-A00

XDM-300 (ETSI) Installation and Maintenance Manual

Catalog No: X36419

August 2007

1st Edition

This is a legal agreement between you, the end-user, and ECI Telecom Ltd. (“ECI Telecom”). BY OPENING THE

DOCUMENTATION AND/OR DISK PACKAGE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS

AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, PROMPTLY RETURN THE

UNOPENED DOCUMENTATION AND/OR DISK PACKAGE AND THE ACCOMPANYING ITEMS (INCLUDING

WRITTEN MATERIALS AND BINDERS OR OTHER CONTAINERS), TO THE PLACE FROM WHICH YOU

OBTAINED THEM.

The information contained in the documentation and/or disk is proprietary and is subject to all relevant copyright,

patent, and other laws protecting intellectual property, as well as any specific agreement protecting ECI Telecom's

rights in the aforesaid information. Neither this document nor the information contained in the documentation and/or

disk may be published, reproduced, or disclosed to third parties, in whole or in part, without the express prior

written permission of ECI Telecom. In addition, any use of this document, the documentation and/or the disk, or the

information contained therein for any purposes other than t

417006-2311-0H3-A00 ECI Telecom Ltd. Proprietary i

Contents

About This Manual ....................................................................xi

Overview .............................................................................................................xi

Intended Audience ..............................................................................................xi

Document Organization......................................................................................xii

Document Conventions......................................................................................xii

Related Documentation.....................................................................................xiii

Obtaining Technical Documentation .................................................................xiii

Technical Assistance.........................................................................................xiv

Introduction..............................................................................1-1

XDM-300 Platform Overview............................................................................ 1-1

XDM-300 I/O Protection Options...................................................................... 1-2

XDM-300 Shelf with CWDM Networking Capabilities ......................................1-7

Before You Start......................................................................2-1

Overview ..........................................................................................................2-1

Outline of Installation Procedure...................................................................... 2-1

Site Preparation................................................................................................2-4

Tools and Test Equipment ...............................................................................2-6

Installing the XDM-300 in Racks......................................................................2-7

Preparing Cables and Fibers..........................................................................2-14

Work and Equipment Safety...........................................................................2-20

Data Cables for EISMBs, DIOMs, and MCSMs .............................................2-28

Protection Against ESD..................................................................................2-30

Equipment Installation............................................................3-1

Overview ..........................................................................................................3-1

Unpacking and Performing Visual Inspection...................................................3-9

Installation Options.........................................................................................3-10

Installing Ancillary Units in Racks...................................................................3-16

Installing the Shelf in the Rack.......................................................................3-41

Grounding the XDM-300 Shelf.......................................................................3-52

Installing XDM-300 Cards .............................................................................. 3-53

Installing XDM-300 Modules ..........................................................................3-60

Installing TPU Modules .................................................................................. 3-69

XDM-300 Accessories....................................................................................3-77

Connecting Fibers and Cables in ETSI A Racks............................................ 3-85

Attaching TPUs/OCU to the XDM-300 Shelf................................................3-120

Contents XDM-300 Installation and

Maintenance Manual

ii ECI Telecom Ltd. Proprietary 417006-2311-0H3-A00

Maintenance.............................................................................4-1

Overview ..........................................................................................................4-1

Required Test Equipment, Tools, and Materials.............................................. 4-1

Preventive Maintenance...................................................................................4-2

Traffic Monitoring System.................................................................................4-7

Onsite Troubleshooting.................................................................................. 4-12

Replacing Cards and Modules....................................................................... 4-20

Replacing RAP Components.......................................................................... 4-28

Connectors Pin Assignment ................................................. A-1

Overview ..........................................................................................................A-1

ECU300/ECU300-F Card Connectors..............................................................A-2

MXC300 DC Input Power Connectors............................................................A-10

PIM2_21 Connection Data.............................................................................A-10

PIM2_63/B Connection Data..........................................................................A-14

EISMB/DIOM/MCSM Connectors ..................................................................A-17

xRAP-100 Connectors....................................................................................A-19

xRAP-B Connectors.......................................................................................A-25

Rack Installation..................................................................... B-1

Installing Equipment Racks..............................................................................B-1

19" Rack Installation.........................................................................................B-6

Reference Documents............................................................ C-1

Index..........................................................................................I-1

417006-2311-0H3-A00 ECI Telecom Ltd. Proprietary iii

List of Figures

Figure 1-1: XDM-300 shelf.............................................................................................1-2

Figure 1-2: Basic XDM-300 shelf, horizontal installation ...............................................1-3

Figure 1-3: Basic XDM-300 shelf, vertical Installation ...................................................1-4

Figure 1-4: XDM-300 with one TPU on top of the shelf.................................................1-5

Figure 1-5: XDM-300 with two TPUs .............................................................................1-6

Figure 1-6: XDM-300 with an OCU and two TPUs ........................................................1-7

Figure 2-1: ETSI A rack closed view..............................................................................2-9

Figure 2-2: XDM-300 - typical horizontal installation in an ETSI A rack......................2-11

Figure 2-3: Typical installation of XDM-300 and XDM-100 shelves in an

ETSI A rack..................................................................................................................2-12

Figure 2-4: Typical installation of XDM-300 and XDM-1000 shelves in an

ETSI A rack..................................................................................................................2-13

Figure 2-5: Grounding connections at typical site........................................................2-21

Figure 2-6: XDM-300 grounding posts.........................................................................2-23

Figure 2-7: XDM-300 CE label.....................................................................................2-24

Figure 2-8: Basic ESD warning symbol .......................................................................2-30

Figure 2-9: XDM-300 typical temporary EPA arrangement.........................................2-33

Figure 3-1: Components of horizontal XDM-300 installation.........................................3-3

Figure 3-2: Components of XDM-300 vertical installation .............................................3-6

Figure 3-3: XDM-300 - typical horizontal installation in an ETSI A rack......................3-11

Figure 3-4: Typical horizontal installation of two XDM-300 shelves in an

ETSI A rack..................................................................................................................3-12

Figure 3-5: Typical horizontal installation of three basic XDM-300 shelves in

2200 mm ETSI A rack..................................................................................................3-13

Figure 3-6: Typical horizontal installation of three XDM-300 shelves with

TPUs in 2600 mm ETSI A racks ..................................................................................3-14

Figure 3-7: XDM-300 - typical vertical installation in an ETSI A rack ..........................3-15

Figure 3-8: Location of xRAP-B grounding stud ..........................................................3-19

Figure 3-9: Identification of xRAP-B cable routes........................................................3-19

Figure 3-10: Connecting DC power cables to the xRAP-B..........................................3-20

Figure 3-11: Identification of xRAP-B connectors........................................................3-21

Figure 3-12: Installation of xRAP-B circuit breakers....................................................3-22

Figure 3-13: Location of xRAP-100 grounding stud.....................................................3-26

Figure 3-14: Identification of xRAP-100 cable routes ..................................................3-27

Figure 3-15: Connecting DC power cables to the xRAP-100 ......................................3-27

Figure 3-16: Identification of xRAP-100 connectors ....................................................3-28

List of Figures XDM-300 Installation and

Maintenance Manual

iv ECI Telecom Ltd. Proprietary 417006-2311-0H3-A00

Figure 3-17: Installation of xRAP-100 circuit breakers ................................................3-30

Figure 3-18: Cable guide..............................................................................................3-32

Figure 3-19: Fiber guide for ETSI A racks ...................................................................3-33

Figure 3-20: Cable slack tray.......................................................................................3-33

Figure 3-21: Threading optical fibers in the FST..........................................................3-34

Figure 3-22: Attaching rack mount brackets to the ODF .............................................3-36

Figure 3-23: ODF front panel.......................................................................................3-36

Figure 3-24: ODF open view........................................................................................3-37

Figure 3-25: ODF fiber routes......................................................................................3-37

Figure 3-26: Threading and connecting optical fibers in the OPP...............................3-40

Figure 3-27: Installing the vertical lower bracket..........................................................3-43

Figure 3-28: Preparing the filter frame assembly.........................................................3-44

Figure 3-29: Installing the filter frame assembly..........................................................3-45

Figure 3-30: Installing the vertical upper bracket.........................................................3-46

Figure 3-31: Installing the thumbnuts...........................................................................3-47

Figure 3-32: Releasing the thumbnuts.........................................................................3-48

Figure 3-33: Lowering the filter frame..........................................................................3-49

Figure 3-34: Filter frame in lower position....................................................................3-50

Figure 3-35: Inserting the air filter................................................................................3-51

Figure 3-36: XDM-300 shelf and rack grounding.........................................................3-52

Figure 3-37: Installing the FCU300..............................................................................3-54

Figure 3-38: Installing the ECU300/ECU300-F............................................................3-55

Figure 3-39: Installing the MXC300 .............................................................................3-56

Figure 3-40: Installing the NVM in the MXC300...........................................................3-57

Figure 3-41: Installing a quad I/O card.........................................................................3-59

Figure 3-42: Inserting an I/O module in the I/O slots...................................................3-62

Figure 3-43: Installing the SIM16_1 mechanical adapter ............................................3-63

Figure 3-44: Inserting an SFP/XFP transceiver into an I/O module.............................3-66

Figure 3-45: Installation of typical double-slot modules in the XDM-300.....................3-67

Figure 3-46: Removing the module guide....................................................................3-68

Figure 3-47: Inserting the TC module (XDM-300)........................................................3-70

Figure 3-48: Inserting a single-slot TPM in the TPU (XDM-300).................................3-71

Figure 3-49: Inserting a double-slot TPM in the TPU (XDM-300)................................3-73

Figure 3-50: Removing a TPM guide...........................................................................3-74

Figure 3-51: Inserting a triple-slot TPM in the TPU (XDM-300)...................................3-75

Figure 3-52: xRAP-B front panel..................................................................................3-78

Figure 3-53: xRAP-B connectors .................................................................................3-79

Figure 3-54: xRAP-100 front panel ..............................................................................3-81

XDM-300 Installation and

Maintenance Manual List of Figures

417006-2311-0H3-A00 ECI Telecom Ltd. Proprietary v

Figure 3-55: xRAP-100 connectors..............................................................................3-82

Figure 3-56: Routing cables and fibers in an ETSI A rack...........................................3-85

Figure 3-57: XDM-300 1:1 protection scheme example ..............................................3-94

Figure 3-58: XDM-300 1:2 protection scheme example ..............................................3-95

Figure 3-59: XDM-300 1:3 protection scheme example ..............................................3-96

Figure 3-60: XDM-300 1:3 protection scheme example ..............................................3-97

Figure 3-61: Connecting to a TPMH_1 protection with an XDM-300...........................3-98

Figure 3-62: XDM-300 with 252 E1s in 1:2 protection connections.............................3-99

Figure 3-63: RJ-45 extractor......................................................................................3-104

Figure 3-64: Inserting the cables (upper row)............................................................3-104

Figure 3-65: Attaching the extractor to the handle (upper row).................................3-105

Figure 3-66: Extracting the connector (upper row) ....................................................3-105

Figure 3-67: LC/SFP extractor...................................................................................3-106

Figure 3-68: Inserting the cables (lower row).............................................................3-106

Figure 3-69: Attaching the extractor to the handle (lower row)..................................3-107

Figure 3-70: Extracting the connector (lower row).....................................................3-107

Figure 3-71: Inserting the fiber into the extractor.......................................................3-108

Figure 3-72: Pressing extractor's release tab onto SFP's clip...................................3-108

Figure 3-73: Extracting the LC connector..................................................................3-109

Figure 3-74: Moving the connector beyond the tab ...................................................3-109

Figure 3-75: Removing the fiber.................................................................................3-109

Figure 3-76: Inserting the fiber into extractor's narrow end .......................................3-110

Figure 3-77: Moving extractor's end to the connector................................................3-110

Figure 3-78: Inserting the connector into the SFP.....................................................3-110

Figure 3-79: Moving the extractor backward..............................................................3-111

Figure 3-80: Removing the extractor from the fiber...................................................3-111

Figure 3-81: Orienting the extractor in front of the SFP.............................................3-111

Figure 3-82: Moving the extractor forward.................................................................3-112

Figure 3-83: Fitting SFP's partition into extractor's slot..............................................3-112

Figure 3-84: Moving extractor toward SFP clip..........................................................3-112

Figure 3-85: Pulling the extractor backward with grasped clip ..................................3-113

Figure 3-86: Locking the clip between lever and extractor's teeth.............................3-113

Figure 3-87: Releasing the SFP from housing...........................................................3-113

Figure 3-88: Extracting the SFP.................................................................................3-114

Figure 3-89: DIN 1.0/2.3 extractor .............................................................................3-115

Figure 3-90: Placing the extractor in front of the connector.......................................3-116

Figure 3-91: Attaching the extractor to the connector's step .....................................3-116

Figure 3-92: Extracting the connector........................................................................3-117

List of Figures XDM-300 Installation and 
Maintenance Manual

XDM-300 Installation and

Maintenance Manual List of Figures

417006-2311-0H3-A00 ECI Telecom Ltd. Proprietary vii

Figure A-13: SHELF alarm connectors pin identification.............................................A-26

Figure A-14: ALARMS connector pin identification......................................................A-28

Figure B-1: Mounting diagrams for ETSI racks..............................................................B-3

Figure B-2: Mounting diagrams for 19" and 23" racks...................................................B-4

Figure B-3: Rack mounting diagram for attachment to suspended overhead

tray (2200 mm rack).......................................................................................................B-5

Figure B-4: Example of an approved European 19" rack ..............................................B-6

List of Figures XDM-300 Installation and

Maintenance Manual

viii ECI Telecom Ltd. Proprietary 417006-2311-0H3-A00

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario