ECD SmartDRY SD Series Manual de instrucciones

ECD SmartDRY - Keeping products safe and reliable for peace of mind.

SD Series Dry Cabinets Setup and Operation Manual

ECD

World Headquarters

Electronic Controls Design, Inc.

4287-B S.E. International Way

Milwaukie, Oregon 97222-8825 U.S.A.

Telephone:

+1 800.323.4548

+1 503.659.6100

FAX:

+1 503.659.4422

Email:

[email protected]

Internet:

http://www.ecd.com

ECD Asia/Pacific

Singapore Office

Telephone:

+65 9692.6822

FAX:

+65 6241.9890

Email:

ecd.asia@ecd.com

ecd.china@ecdchina.cn

ECD Europe/Africa/Middle East

Mobile::

+48 512 659 100

Email:

ecd.europe@ecd.com

Pending. Information in this publication supersedes all previously published information. This Publication may not be translated and/or

reproduced or stored in data retrieval system, or transmitted in any form or by any means without the express written permission of

ECD. Specification and price change privileges reserved.

The trapezoidal ECD logo® is a registered trademark of ECD. SmartDRY™ is a trademarked by ECD.

While every precaution has been taken in the preparation of this document, ECD assumes no responsibility for errors or omissions, or

for damages resulting from the use of information contained in this document or from the use of programs and source code that may

accompany it. In no event shall ECD be liable for any loss of profit or any other commercial damage caused or alleged to have been

caused directly or indirectly by this document.

DECLARATION OF CONFORMITY

Electronic Controls Design, Inc.

4287-B S.E. International Way

Milwaukie, Oregon U.S.A. 97222-8825

(503) 659-6100 / (800) 323-4548

FAX: (503) 659-4422

Declaration of Conformity

Product:

SmartDRY™ SD-10 & SD-10SB

Part Number:

E55-7310-30/35

E58-7310-60/65

SmartDRY™ SD-30 & SD-10SB

E55-7330-30/35

E57-7339-30/35

SmartDRY™ SD-48F & SD-30XD

E55-7483-30/35

E57-7489-30/35

The undersigned hereby declares, on behalf of the ECD Inc., that the above-referenced product, to which this declara-

tion relates, is in conformity with the provisions of:

SAFTEY:

IEC 61010-1 “Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General require-

ments”

EMISSIONS:

EN 61000-3-2:2014 “Electromagnetic Compatibility (EMC) - Limits For Harmonic Current Emissions …”

EN 61000-3-3:2013 “Electromagnetic Compatibility (EMC) - Limitation of voltage changes, voltage fluctuations and flicker …”

EN 61000-6-4:2007+A1:2011 Class A “Electromagnetic compatibility (EMC) - Emission standard for industrial

environments”

FCC 15.107:2015 Class A “Conducted Limits”

FCC 15.109(g):2015 Class A “Radiated emission limits”

ICES-003:2012 Class A “Information Technology Equipment (ITE) – Limits”

IMMUNITY:

EN 61000-6-1:2007 “Electromagnetic Compatibility (EMC). Immunity for residential, commercial and light-industrial environments”

The Technical Construction File required by this Directive is maintained at the corporate headquarters of ECD, Inc.

Name:

Paul Austen

Position:

Senior Project Engineer

Signature:

Date:

August, 2015

TABLE OF CONTENTS

1.0 Introduction ......................................................................................................................................................................................... 7

2.0 Receiving and Inspection .....................................................................................................................................................................8

2.1 Inspection......................................................................................................................................................................................... 8

2.2 Loss or Damage................................................................................................................................................................................ 8

2.3 Shipping Materials ...........................................................................................................................................................................8

2.4 Return Shipment ..............................................................................................................................................................................8

2.5 Accessories....................................................................................................................................................................................... 8

3.0 Graphic Symbols .................................................................................................................................................................................. 9

4.0 Operators Safety Information ............................................................................................................................................................12

5.0 Setup & Installation............................................................................................................................................................................ 13

5.1 Power Source ................................................................................................................................................................................. 13

5.2 Location.......................................................................................................................................................................................... 14

5.3 Lifting / Handling............................................................................................................................................................................15

5.4 Leveling .......................................................................................................................................................................................... 15

5.5 Shelf Placement ............................................................................................................................................................................. 16

6.0 Control Panel .....................................................................................................................................................................................18

6.1 Main Display................................................................................................................................................................................... 18

6.1.1 Current RH ..............................................................................................................................................................................19

6.1.2 Current Temperature .............................................................................................................................................................. 19

6.1.3 Status indicators ..................................................................................................................................................................... 20

6.1.4 Count Down Timer .................................................................................................................................................................. 22

6.1.5 Graph Display.......................................................................................................................................................................... 23

6.1.6 Menu System .......................................................................................................................................................................... 23

6.2 OK................................................................................................................................................................................................... 24

6.3 Down Arrow ................................................................................................................................................................................... 24

6.4 Up Arrow........................................................................................................................................................................................ 24

6.5 Interior Lighting.............................................................................................................................................................................. 25

6.6 Alarm Mute .................................................................................................................................................................................... 25

6.7 Alarm Cancel ..................................................................................................................................................................................26

6.8 ESD Protection ...............................................................................................................................................................................26

7.0 Network Dashboard........................................................................................................................................................................... 27

7.1 Dashboard...................................................................................................................................................................................... 27

7.2 Settings ..........................................................................................................................................................................................29

7.3 Setup .............................................................................................................................................................................................. 30

7.4 Viewing initial SmartDRY™ data..................................................................................................................................................... 30

SD Series Dry Cabinets Setup and Operation Manual | A55-7379-00 Rev: 2.0.0 Page 5

8.0 Quick Start..........................................................................................................................................................................................31

8.1 Safety and Installation ................................................................................................................................................................... 31

8.2 Location.......................................................................................................................................................................................... 31

8.3 Shelf Configuration ........................................................................................................................................................................ 32

8.4 Power .............................................................................................................................................................................................33

8.5 Time settings.................................................................................................................................................................................. 34

8.6 Clear History................................................................................................................................................................................... 35

9.0 Operation ........................................................................................................................................................................................... 36

9.1 SmartDRY™ Menu System .............................................................................................................................................................37

9.1.1 RH Setpoint ............................................................................................................................................................................. 38

9.1.2 Alarms (SmartDRY™)............................................................................................................................................................... 39

9.2 SmartBAKE™ Menu (Optional)....................................................................................................................................................... 41

9.2.1 J-STD-033 ................................................................................................................................................................................42

9.2.2 Manual Bake ...........................................................................................................................................................................43

9.2.3 Alarms (SmartBAKE™) .............................................................................................................................................................44

9.3 Other Settings ................................................................................................................................................................................ 46

9.3.1 Units ........................................................................................................................................................................................ 46

9.3.2 Date/Time ............................................................................................................................................................................... 47

9.3.3 Data Logging ........................................................................................................................................................................... 48

9.3.4 Network .................................................................................................................................................................................. 49

9.3.5 Sensor ..................................................................................................................................................................................... 50

9.3.6 Lighting.................................................................................................................................................................................... 51

9.3.7 Passcode .................................................................................................................................................................................52

9.4 Help................................................................................................................................................................................................ 53

9.5 Graph ............................................................................................................................................................................................. 54

10.0 Equipment Maintenance .................................................................................................................................................................55

10.1 Cleaning ....................................................................................................................................................................................... 55

10.2 ECD SmartDRY™ Humidity and Temperature Sensor .................................................................................................................. 56

10.3 Clock battery ................................................................................................................................................................................ 57

10.4 SmartDRY™ Dryer ........................................................................................................................................................................58

10.5 Power Board ................................................................................................................................................................................65

10.6 RH/Temperature Probe ............................................................................................................................................................... 69

10.7 SmartBAKE™ Heater..................................................................................................................................................................... 70

SD Series Dry Cabinets Setup and Operation Manual | A55-7379-00 Rev: 2.0.0 Page 6

11.0 Service and Troubleshooting ........................................................................................................................................................... 72

11.1 Main Display is black:................................................................................................................................................................... 72

11.2 RH set point is not achieved: ....................................................................................................................................................... 73

11.3 Bake Temperature set point is not achieved: ..............................................................................................................................74

11.4 System Alerts ...............................................................................................................................................................................75

11.5 Updating SmartDRY™ SD Series Dry Cabinets Firmware & Network Dashboard ........................................................................ 76

11.6 SYSTEM RESET.............................................................................................................................................................................. 77

11.7 Contact Information.....................................................................................................................................................................80

Appendix ..................................................................................................................................................................................................81

Appendix A: Parts List ..........................................................................................................................................................................81

Appendix B: Specifications................................................................................................................................................................... 82

Appendix C: Schematic ........................................................................................................................................................................85

Appendix D: Useful Tables ...................................................................................................................................................................87

Appendix E: Gossary ............................................................................................................................................................................ 88

Appendix F: Network ...........................................................................................................................................................................96

SD Series Dry Cabinets Setup and Operation Manual | A55-7379-00 Rev: 2.0.0 Page 7

1.0 INTRODUCTION

Thank you for purchasing an ECD SmartDRY™ SD Series Dry Cabinets. We know that in today’s competitive

market place, customers have several choices when purchasing a dry storage cabinet. Our continued reputa-

tion as a leading supplier of process and measurements tools depends of each customer’s continued satisfac-

tion. ECD, Inc. stands behind our products and wants to let you know we are here if you need us.

Before you use the SmartDRY™ Cabinet, read this entire manual carefully to understand how to install, oper-

ate, and maintain the unit in a safe manner. Your satisfaction with the unit will be maximized as you read

about its safety and operational features.

Keep this manual on-hand so it can be used by all operators of the unit. Be sure all operators of the unit are

given appropriate training before you put the unit in service.

This Setup and Operation Manual explains how to install use ECD dry storage cabinets and Network Dash-

board.

This Setup and Operation Manual is written for users of varied experience. If a section covers information you

already know, feel free to skip to the next section.

HARDWARE PORTIONS OF THIS MANUAL ARE WRITTEN TO REFLECT THE FOLLOWING FIRMWARE

VERSION 00.01.09 AND HIGHER.

THE NETWORK DASHBOARD PORTIONS REFLECT VERSION(S) 1.06 AND HIGHER.

SD Series Dry Cabinets Setup and Operation Manual | A55-7379-00 Rev: 2.0.0 Page 8

2.0 RECEIVING AND INSPECTION

IMPORTANT: READ THIS MANUAL IMMEDIATELY.

Your satisfaction and safety require a complete understanding of the SmartDRY™ Cabinet, including its proper

function and operation. Be sure operators are given adequate training before attempting to put the cabinet in

service.

This equipment must be used only for its intended application; any alterations or modifications

will void your warranty.

2.1 INSPECTION

The carrier, when accepting shipment, also accepts responsibility for safe delivery and is liable for loss or dam-

age claims. On delivery, inspect for visible exterior damage. Note and describe on the freight bill any damage

found and enter your claim on the form supplied by the carrier.

2.2 LOSS OR DAMAGE

Inspect for concealed loss or damage on the cabinet itself, both interior and exterior. If any, the carrier will

arrange for official inspection to substantiate your claim.

2.3 SHIPPING MATERIALS

Save the shipping crate until you are sure the unit has been delivered in good condition.

2.4 RETURN SHIPMENT

If for any reason you must return the unit, contact ECD for a Return Materials Authorization (RMA). Be pre-

pared to supply the Model Number and Serial number located on the Serial number label when requesting an

RMA. Please refer to 11.0 Service & Troubleshooting for information for contact information or visit

www.ecd.com.

2.5 ACCESSORIES

Verify all of the equipment indicated on the packing list is included with the unit. Carefully check all packaging

before discarding.

SD Series Dry Cabinets Setup and Operation Manual | A55-7379-00 Rev: 2.0.0 Page 9

3.0 GRAPHIC SYMBOLS

The SmartDRY™ Cabinet and this Setup and Operation Manual uses graphic symbols which help identify at a

glance several Dangers, warnings, functions, as well as indicate the status of the cabinet:

Product Symbols:

Warning: Whenever this internationally recognized symbol is used on the product, additional infor-

mation concerning that particular feature or function appears in the Setup and Operation Manual.

Waste Electrical and Electronic Equipment (WEEE). Unit should be recycled; Do not disposed of in

land-fill.

Warning: Warm surface or vent. Keep clear; do not touch or block.

Electro Static Discharge (ESD) protective wrist strap connection point.

Ground point.

Warning: Electrical Shock / Electrocution Hazard. Do not remove this cover.

SD Series Dry Cabinets Setup and Operation Manual | A55-7379-00 Rev: 2.0.0 Page 10

Control Panel Symbols:

Displays Main Menu.

Animated symbol that indicates Drying in process. Static indicates this dryer is on line.

Animated symbol that indicates Regeneration in process. Static indicates awaiting regeneration.

Animated symbol that indicates heat is being applied. Static indicates Bake cycle initiated.

Displays a graph (rH or Temperature)

Moves increments a user entered value.

Approves a user set value for the the current highlighted menu item.

Moves decrements a user entered value.

Mutes the buzzer for all current alarms.

Press to turn on the interior lights.

Indicates that the cabinet is connected to a network.

Otros manuales para SmartDRY SD Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Secadora de ECD

ECD

ECD SmartDRY SD Series Manual de instrucciones

Manuales populares de Secadora de otras marcas

Bosch

Bosch WTA79200GB Manual de usuario

Amana

Amana W10233410A Manual de usuario

Miele

Miele TWH 780 WP Manual de usuario

Asko

Asko T760 Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Manual de usuario

Bosch

Bosch Logixx 10 WTB76556GB Hoja de especificaciones

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Manual de instrucciones

Electrolux

Electrolux EW2H328R2 Manual de usuario

Beko

Beko DS8433RX1M Manual de usuario

Dawlance

Dawlance Spinner DS 6000 C Manual de usuario

Electrolux

Electrolux TP5080TW Manual de usuario

AEG

AEG TR838P4OB Manual de usuario

Indesit

Indesit IDV 75 Manual de usuario

Infiniton

Infiniton SD-DG85C Manual de usuario

BOMANN

BOMANN WT 5019 Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Manual de usuario

Asko

Asko T793C Manual de usuario

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer Manual de usuario