Ebyte ESP32-C3-MINI-1 Manual de usuario

ESP32-C3-MINI-1

ESP32-C3-MINI-1U

Development Board User Manual

Contents

ESP32-C3-MINI-1 .........................................................................................................1

ESP32-C3-MINI-1U ...................................................................................................... 1

Development Board User Manual ................................................................................. 1

Disclaimer and Copyright Notice .................................................................................. 2

1 Overview .....................................................................................................................3

1.1 Product introduction ..........................................................................................3

1.2 Parameters .........................................................................................................3

2. Components introduction ...........................................................................................4

2.1 Components and interfaces ............................................................................... 4

2.2 Pin Definition ....................................................................................................5

2.3 Function introduction ........................................................................................6

3 Program Burning Guide .............................................................................................. 7

4 Revision History ......................................................................................................... 7

Chengdu Ebyte Electronic Technology Co.,Ltd. ESP32-C3-MINI Dev. Board User Manual

Disclaimer and Copyright Notice

Information in this document, including URL addresses for reference, is subject to

change without notice. Documentation is provided "as is" without warranty of any

kind, including any warranties of merchantability, fitness for a particular purpose, or

non-infringement, and any warranties referred to elsewhere in any proposal,

specification or sample. No responsibility is assumed in this document, including any

liability for infringement of any patent rights arising out of the use of the information

in this document. This document does not hereby grant, by estoppel or otherwise, any

license, express or implied, to use any intellectual property rights.

The test data obtained in this article are all obtained by the Ebyte laboratory test, and

the actual results may be slightly different. All trade names, trademarks and registered

trademarks mentioned herein are the property of their respective owners and are

hereby acknowledged.

Ebyte Electronic Technology Co., Ltd.

Note :

Due to product version upgrade or other reasons, the contents of this manual may be changed.

Ebyte Electronic Technology Co., Ltd. reserves the right to modify the contents of this manual

without any notice or prompt. This manual is only used as a guide . Chengdu Ebyte Electronic

Technology Co., Ltd. does its best to provide accurate information in this manual. However,

Chengdu Ebyte Electronic Technology Co., Ltd. does not ensure that the contents of the manual

are completely error-free. All statements in this manual , information and advice do not create any

express or implied warranties.

Chengdu Ebyte Electronic Technology Co.,Ltd. ESP32-C3-MINI Dev. Board User Manual

1 Overview

1.1 Product introduction

ESP32-C3-MINI-1-TB ESP32-C3-MINI-1U-TB

ESP32-C3-MINI-1-TB and ESP32-C3-MINI-1U-TB are two entry-level development

boards for developing and testing small-sized ESP32-C3-MINI-1 &

ESP32-C3-MINI-1U modules.

This group of development boards has complete Wi-Fi and Bluetooth low energy

functions, and most of the pins of the modules on the board have been led out to the

pin headers on both sides. Developers can easily connect various peripherals through

jumpers according to actual needs. The device can also be used by plugging the

development board into the breadboard.

1.2 Parameters

NO.

Name

Value

Notes

Support module

ESP32-C3-MINI-1

ESP32-C3-MINI-1U

WiFi serial module

Module size

38.91 * 25.4mm

Including USB connector

Production Process

Lead-free process,

machine sticker

Wireless products must be

machine-mounted to ensure batch

consistency and reliability

Power supply interface

USB

Communication Interface

TTL

Operating temperature

-40 ~ +85℃

Industrial grade

Working humidity

10% ~ 90%

Relative humidity, non-condensing

Storage temperature

-40 ~ +125℃

Industrial grade

Chengdu Ebyte Electronic Technology Co.,Ltd. ESP32-C3-MINI Dev. Board User Manual

2. Components introduction

2.1 Components and interfaces

2 Main component diagram

No.

Name

Functions

ESP32-C3-MINI-1 &

ESP32-C3-MINI-1 U

ESP32-C3-MINI-1 & ESP32-C3-MINI-1 U are general-purpose Wi-Fi

and Bluetooth low energy dual-mode modules with PCB onboard

antennas. This module integrates the ESP32-C3FN4 chip with 4 MB

embedded flash. Since the flash is directly packaged in the chip, the

ESP32-C3-MINI-1 module has a smaller package size.

5V to 3.3V LDO

Power converter, input 5 V, output 3.3 V.

5 V power indicator

This indicator lights up when the board is connected to USB power.

All available GPIO pins (except the flash's SPI bus) have been routed to

the board's pin headers. Please see pin headers for more information.

Boot key

Download button. Hold down the Boot key and press the Reset key to

enter the "Firmware Download" mode, and download the firmware

through the serial port.

Micro-USB interface

USB interface. It can be used as the power supply for the development

board or as the communication interface between the PC and the

ESP32-C3FN4 chip.

Reset key

Reset button.

USB to UART bridge

Single-chip USB to UART bridge providing transfer rates up to 3

Mbps.

RGB LED

Addressable RGB LED, driven by GPIO8.

Note: For specific function instructions, please refer to the user manual of ESP32-C3-MINI-1 &

Chengdu Ebyte Electronic Technology Co.,Ltd. ESP32-C3-MINI Dev. Board User Manual

ESP32-C3-MINI-1 U.

2.2 Pin Definition

The following positive illustration shows the ESP32-C3-MINI-1-TB as an

example:

Current test interface diagram

NO.

Name

Type

Functions

GND

ground

3V3

3.3V power supply

3V3

3.3V power supply

IO2

I/O/T

GPIO2, ADC1_CH2, FSPIQ

IO3

I/O/T

GPIO3, ADC1_CH3

GND

ground

RST

CHIP_PU

GND

ground

IO1

I/O/T

GPIO1, ADC1_CH1, XTAL_32K_N

IO1

I/O/T

GPIO1, ADC1_CH1, XTAL_32K_N

IO10

I/O/T

GPIO10, FSPICS0

GND

ground

5V power supply

GND

ground

GND

ground

IO19

I/O/T

GPIO19

IO18

I/O/T

GPIO18

GND

ground

IO4

I/O/T

GPIO4, ADC1_CH4, FSPIHD, MTMS

Chengdu Ebyte Electronic Technology Co.,Ltd. ESP32-C3-MINI Dev. Board User Manual

IO5

I/O/T

GPIO5, ADC2_CH0, FSPIWP, MTDI

IO6

I/O/T

GPIO6, FSPICLK, MTCK

IO7

I/O/T

GPIO7, FSPID, MTDO

GND

ground

IO8

I/O/T

GPIO8, RGB LED

IO9

I/O/T

GPIO9

GND

ground

I/O/T

GPIO20, U0RXD

I/O/T

GPIO21, U0TXD

GND

ground

Notes:

1. P: power supply ; I: input; O: output; T: can be set to high impedance.

2. GPIO2, GPIO8, and GPIO9 are the strapping pins of the ESP32-C3FN4 chip. During c

hip power-on and system reset, the strapping pin controls the chip function according to t

he binary voltage value of the pin. For the specific description and application of the stra

pping pins, please refer to the chapter on strapping pins in the ESP32-C3 chip manual .

3. The power supply mode is Micro-USB interface power supply (default), 5V and GND

pin header power supply, 3V3 and GND pin header power supply.

2.3 Function introduction

ESP32-C3-MINI-1-TB&ESP32-C3-MINI-1U-TB The main components and connection methods are

shown in the following diagram:

Chengdu Ebyte Electronic Technology Co.,Ltd. ESP32-C3-MINI Dev. Board User Manual

3 Program Burning Guide

Before powering on, make sure the ESP32-C3-MINI-1-TB &

ESP32-C3-MINI-1U-TB are intact.

Tools to prepare: ESP32-C3-MINI-1-TB or ESP32-C3-MINI-1U-TB, USB 2.0

cable (Standard A to Micro-B , computer -Windows, Linux or macOS. Please

make sure to use Appropriate USB cables, some cables are for charging only, not

for data transfer and programming.

Connect the USB data cable, and burn the program from computer software;

4 Revision History

Version

revision date

Revision Notes

Name

1.0

2022-10-27

initial version

Hao

Technical support: [email protected]

Documents and RF Setting download link: https://www.cdebyte.com

Thank you for using Ebyte products! Please contact us with any questions or suggestions: info@cdebyte.com

------------------------------------------------------------------------------------------------------------

Fax: 028-64146160 Web: https://www.cdebyte.com

Address: B5 Mould Industrial Park, 199# Xiqu Ave, High tech Zone, Chengdu, Sichuan, China

Otros manuales para ESP32-C3-MINI-1

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Ebyte

Ebyte

Ebyte E77-400MBL-01 Manual de usuario

Ebyte

Ebyte E103-W04-TB Manual de usuario

Ebyte

Ebyte E30-900MBL-01 Manual de usuario

Ebyte

Ebyte ESP32-S3-WROOM Series Manual de usuario

Ebyte

Ebyte MBL Series Manual de usuario

Ebyte

Ebyte EoRa PI Manual de usuario

Ebyte

Ebyte E104-BT5011A-TB Manual de usuario

Ebyte

Ebyte E104-BT5010A-TB Manual de usuario

Ebyte

Ebyte MBL Series Manual de usuario

Ebyte

Ebyte ESP32 Series Manual de usuario

Ebyte

Ebyte MBL Series Manual de usuario

Ebyte

Ebyte E73-TBA Manual de usuario

Ebyte

Ebyte ESP32-S3-MINI Series Manual de usuario

Ebyte

Ebyte MBL Series Manual de usuario

Ebyte

Ebyte E104-BT5010A-TB Manual de usuario

Ebyte

Ebyte E32-400MBL-01 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario