Eaton Powerware 5125 Manual de usuario
Powerware 5125 (9910-E65) UPS
Installation Guide for IBM Applications
®
®
This product is covered by one or more of the following US Patent numbers: 5177676, 6314007, 6330176,
6391489, 6483730, and 6599657.
IBM, pSeries, AIX, xSeries, AS/400, OS/400, and RS/6000 are registered trademarks and iSeries, OpenPower, and
i5/OS are trademarks of International Business Machines Corp.
Eaton, Powerware, X-Slot, and LanSafe are registered trademarks and ConnectUPS is a trademark of Eaton
Corporation or its subsidiaries and affiliates.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
Linux is a registered trademark of Linus Torvalds.
Burndy is a registered trademark of Framatone Connectors International.
ECopyright 2007 Eaton Corporation, Raleigh, NC, USA. All rights reserved. No part of this document may be
reproduced in any way without the express written approval of Eaton Corporation.
Special Symbols
The following are examples of symbols used on the UPS or accessories to alert you to important
information:
RISK OF ELECTRIC SHOCK - Indicates that a risk of electric shock is present and the
associated warning should be observed.
CAUTION: REFER TO OPERATOR’S MANUAL - Refer to your operator’s manual for
additional information, such as important operating and maintenance
instructions.
This symbol indicates that you should not discard the UPS or the UPS batteries
in the trash. This product contains sealed, lead-acid batteries and must be
disposed of properly. For more information, contact your local recycling/reuse or
hazardous waste center.
This symbol indicates that you should not discard waste electrical or electronic
equipment (WEEE) in the trash. For proper disposal, contact your local
recycling/reuse or hazardous waste center.
This page intentionally left blank.
EATON Powerware®5125 (9910-E65) UPS Installation Guide for IBM®Applications S164201698 Rev 1 i
Table of Contents
1 Installation 1.........................................................
Parts List 1..........................................................................
Setup and Installation 3.................................................................
Tools Required 4....................................................................
Rack-Mount Setup 4.................................................................
Installing the Internal Batteries 13...........................................................
EBM Installation 14.....................................................................
UPS Installation 16.....................................................................
Remote Emergency Power-off Installation 17...................................................
Power Connections and Startup 19..........................................................
Load Segments 25......................................................................
2 Operation 27..........................................................
Turning the UPS On 27...................................................................
Starting the UPS on Battery 27.............................................................
Turning the UPS Off 27...................................................................
Initiating the Self-Test 28.................................................................
Operating Modes 28....................................................................
Normal Mode 29....................................................................
Battery Mode 29....................................................................
Bypass Mode 30.....................................................................
Standby Mode 30....................................................................
Configuration Mode 30...................................................................
3 Communication Options 35..............................................
i5, iSeries, or AS/400 and Serial Server Interface Overview 35.......................................
Serial (TTY) Interface Overview 38...........................................................
p5 or pSeries with Logical Partitions Interface Overview 39.........................................
4 Service and Support 41.................................................
TABLE OF CONTENTS
EATON Powerware®5125 (9910-E65) UPS Installation Guide for IBM®Applications S164201698 Rev 1
ii
This page intentionally left blank.
EATON Powerware®5125 (9910-E65) UPS Installation Guide for IBM®Applications S164201698 Rev 1 1
Chapter 1 Installation
Parts List
IBM part numbers are subject to change without notice.
Table 1. E65 Base Configuration (42R8077)
Quantity IBM MN IBM FC IBM PN Eaton®PN Description
1E65 —42R8077 103003611-3992 E65 UPS 5000 VA, 4500W (in shipping carton or
factory-installed in rack)*
103006304 Accessory Kit*:
S(1) Left Rail Assembly (103006314)
S(1) Right Rail Assembly (103006315)
S(2) Mounting Brackets (157606083-003)
S(4) Mounting Bracket Screws (#6-32×3/8”)
(180500167-203)
1 — — 42R8078 103004715-3992 E65 Accessory Kit
2 — — 39J4828 103004696-3991 Battery Trays
* If the UPS is factory-installed in an IBM rack, these items are pre-assembled.
Table 2. E65 Application Matrix
IBM MN IBM FC IBM PN Eaton PN Description
Quantity for
p5/pSeries®
Rack Worldwide
Quantity for
i5/iSeriest
Rack Worldwide
—2939142R4332 103004741-5591 Relay-Serial Card and Cable
Kit (DB-9, 1.8m/6 ft;
(DB-25, 9.1m/30 ft)
— 1
—2972225R2555 IBM-Supplied IBM PDU to UPS Power Cord
(4.3m/14 ft)
1
E
6
5
U
P
S
—2973242R4331 103004733-3991 IBM PDU to UPS Power Cord
(1.2m/4 ft)
1 per E65 UPS
Varies3Varies Varies IBM-Supplied UPS Input Power Cord 1 per E65 UPS
1Maximum: One FC 2934 or 2939 per E65 UPS.
2Maximum: One FC 2972 or 2973 per E65 UPS.
3See “Typical Power Connections” on page 21.
INSTALLATION
EATON Powerware®5125 (9910-E65) UPS Installation Guide for IBM®Applications S164201698 Rev 1
2
Table 3. E65 Options Matrix
IBM MN IBM FC IBM PN Eaton PN Description
Quantity for
p5/pSeries Rack
Worldwide
Quantity for
i5/iSeries Rack
Worldwide
—2934139J4824 116750221-001 -X Web/SNMP
Card2Kit
ConnectUPStMin: 0, Max: 1 —
—6645 42R8075 103003387-3992 Extended Battery Module
(EBM)
Min: 0, Max: 4
— — 42R8076 103003947-3992 EBM Accessory Kit 1 per FC 6645
1Maximum: One FC 2934 or 2939 per E65 UPS.
2ConnectUPS-X Web/SNMP Card required if implementing Logical Partitions (LPARs) on p5 or pSeries.
Table 4. E65 Accessory Kit (42R8078)
Quantity Eaton PN Description
1164201541 Powerware 5125 Rack-Mount UPS (5000/6000 VA) User’s Guide
1164201698 Powerware 5125 (9910-E65) Installation Guide for IBM Applications
4152601942-001 IEC 320-C13 to C14, 10A Equipment Power Cords (2m/6.6 ft)
1152601971-001 IEC 320-C19 to C20, 16A Equipment Power Cord (4.5m/14.8 ft)
1103004870 Software Suite CD
1157809009-002 UPS Front Cover
1116750226-001 UPS to Server Communication Cable (RJ-45 to DB-9, 1.8m/6 ft)
1124102042-002 UPS to Server Communication Cable (DB-9 to DB-9, 3.6m/12 ft)
1103002843-3992 Rail Hardware Kit (metric):
S(8) M5×12 Pan-Head Screws
S(8) M5×10 Flat-Head Screws
S(4) M5×16 Hex-Head Screws
S(4) M5 Clip Nuts
S(2) Square-Hole Adapter Plates
1154105635-001 Connector Plug, 10A, 2-Pin
INSTALLATION
EATON Powerware®5125 (9910-E65) UPS Installation Guide for IBM®Applications S164201698 Rev 1 3
Table 5. E65 6645 EBM Components (42R8075)
Quantity IBM MN IBM FC IBM PN Eaton PN Description
1 — 6645 42R8075 103003387-3992 E65 6645 EBM 3U High (in shipping carton or
factory-installed in rack)*
103006308 Accessory Kit*:
S(1) EBM Front Cover (157604790-002)
S(1) Left Rail Assembly (103006173)
S(1) Right Rail Assembly (103006172)
1 — — 42R8076 103003947-3992 EBM Accessory Kit
* If the EBM is factory-installed in an IBM rack, these items are pre-assembled.
Table 6. EBM Accessory Kit (42R8076)
Quantity Eaton PN Description
1164201518 Powerware 240V Extended Battery Module (EBM 240) User’s Guide
1103002843-3992 Rail Hardware Kit (metric):
S(8) M5×12 Pan-Head Screws
S(8) M5×10 Flat-Head Screws
S(4) M5×16 Hex-Head Screws
S(4) M5 Clip Nuts
S(2) Square-Hole Adapter Plates
2157605902-003 Joining Brackets
4180500153-306 Joining Bracket Screws (M4×10 mm)
Setup and Installation
The E65 UPS can be purchased separately or factory-installed in an IBM
iSeries or pSeries rack.
NOTE If the UPS is pre-installed in an IBM rack, continue to “Installing the Internal
Batteries” on page 13. If you are installing the UPS in an IBM iSeries (0550, 0551, 0553, 0554
or 0555 type) or pSeries (7014 type) rack, continue to the following section, “Tools Required.”
INSTALLATION
EATON Powerware®5125 (9910-E65) UPS Installation Guide for IBM®Applications S164201698 Rev 1
4
Tools Required
To assemble the components, the following tools may be needed:
SMedium flat-bladed screwdriver
S#2 Phillips screwdriver
S8mmwrenchorsocket
Rack-Mount Setup
The rail kit can be mounted in 48-cm (19-inch) panel racks from 61 to
76 cm (24 to 30 inches) deep.
NOTE Mounting rails are required for each individual cabinet and are located in the UPS
and EBM cartons. All hardware is supplied.
NOTE If placing the E65 in a rack with existing equipment, the rack must be reconfigured
to install the heaviest item in the bottom of the rack. The UPS weighs 73 kg (161 lb) and the
EBM weighs 77.1 kg (170 lb).
Each rail kit requires one (1) of each item in the following list:
SLeft adjustable rail assembly (located in the UPS and EBM cartons)
SRight adjustable rail assembly (located in the UPS and EBM cartons)
SRail hardware kit (located in the E65 UPS and EBM accessory kits)
Otros manuales para Powerware 5125
9
Tabla de contenidos
Otros manuales de Unión Postal Universal de Eaton
Eaton
Eaton Powerware BladeUPS Manual de usuario
Eaton
Eaton 9155 UPS Manual de usuario
Eaton
Eaton 9PX 1000i Manual de usuario
Eaton
Eaton Powerware 9130 Manual de usuario
Eaton
Eaton Powerware 9135 Manual de usuario
Eaton
Eaton 5S 1000VA Manual de usuario
Eaton
Eaton Power Xpert PXGX Manual de programación
Eaton
Eaton FERRUPS Manual de usuario
Eaton
Eaton TRIPP LITE Series Instrucciones de montaje
Eaton
Eaton Powerware 9125 Manual de usuario
Eaton
Eaton Ellipse ECO 500 Manual de usuario
Eaton
Eaton Eaton 5PX Instrucciones de montaje
Eaton
Eaton 9PXM8S4K Manual de usuario
Eaton
Eaton Power Xpert Plus 1 Manual de usuario
Eaton
Eaton E Series DX Manual de usuario
Eaton
Eaton 9155 N Manual de usuario
Eaton
Eaton 9125 Two-in-One UPS 2500 Manual de usuario
Eaton
Eaton 5S 550 Manual de usuario
Eaton
Eaton Power Xpert 9395 550 Manual de usuario
Eaton
Eaton 5E Instrucciones de montaje
Manuales populares de Unión Postal Universal de otras marcas
Pylontech
Pylontech Victron & Pylontech US5000 Manual de usuario
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Manual de usuario
Mecer
Mecer ME-1000-WTU Manual de usuario
Mustek
Mustek PowerMust 530(B) Plus Manual de instalación y operación
Emerson
Emerson Liebert NXL series Manual de usuario
MAKELSAN
MAKELSAN BOXER SERIES Manual de usuario
