Eaton SPD Series Manual

Instruction Leaet IL158006EN Effective November 2020

PX-SPD quick start guide

Device information

Features and benefits

• Surge protective device (SPD)

Designed to protect against damaging transient

voltage events

• Surge counter

Captures surge events on each phase, which

are categorized as low, medium, and high

according to the IEEETstandard C62.41 and

logs up to 5000 events

• Time-and-date stamped surge log

Logs transient surge events from your system,

records and saves in an event log with time

and date stamp viewable on a local display and

webpage, as well as a downloadable .csv file

• Alarm

When an audible alarm is produced, an alarm

message is viewable on the display as well as

the web interface; an activated alarm can be

silenced locally

• LED indicators

The tricolored (green/red/yellow) LED

protection status indicators are standard for

each phase and for neutral-ground protection

mode, when applicable

• Percentage protection status

Indicates the amount of surge protection

active per phase and for neutral-ground,

when applicable

• Connectivity

The RJ45 Ethernet port provides

communication between the Power Xpert™

SPD and webpage, ModbusTTCP/IP, or

BACnet/IP communications

• Form C relay contact

Provides remote SPD status; the NO and NC

contacts change states when any phase detects

a total loss of protection

Remote monitoring capabilities

• Onboard webpage

• BACnet/IP

• Modbus TCP/IP

• PXG900 Gateway

• Power Xpert Dashboard

Instruction Leaet IL158006EN

Effective November 2020

PX-SPD quick start guide

EATON www.eaton.com

Configuring your LCD display

Up and Down buttons

Use these to move between options in the menu and select an

alphanumeric character where appropriate in the menus.

Back and Enter buttons

Use these to make menu selections, navigate to other menus, and

exit or edit/save your selection.

1. Apply power to the product.

2. Press the Enter button (>) to navigate from the home screen to

the next menu.

3. Select the Setting menu and press Enter.

a. Enter a 6-digit numeric password for the LCD

b. Use the Up and Down buttons to scroll through the numbers

c. Press Enter to skip to the next digit

d. Press Enter at the end of the 6th digit to save the password

4. Select Set Date and Time under the Settings menu and

press Enter.

a. Set the date and time using the navigation buttons

b. Scroll to the end of the seconds in time setting

row to save the date and time

Time will initially be read as UTC time on the webpage

and can be changed later through the webpage

5. Select Set Device Name under the Settings menu and

press Enter.

a. Use the Up and Down buttons to scroll through the

alphanumeric characters

b. Press enter to skip to the next character

There is a selection to enter a blank space; it is located

between the number 0 and character Z

ote:N You must enter a blank space in between words to separate them.

c. When finished entering the name and to save the results,

keep pressing the Enter button until the cursor reaches end

of the row, and then press the Enter (>) button one more

time to save the entry

Instruction Leaet IL158006EN

Effective November 2020

PX-SPD quick start guide

EATON www.eaton.com

Communications setup

Configuration of Ethernet communication

Device default IP Address (192.168.1.254)

Connect Cat 5, or better, Ethernet cable between product and PC.

ote:N Configuring Modbus and BACnet/IP communication settings can be

found in the Instruction Manual.

Changes to WindowsTPC Ethernet adapter settings for IPv4

1. Search for Change Adapter Settings in your Control Panel

Network Settings.

2. Right click on Local Area Connection.

3. Click on Properties.

4. Click on Internet Protocol Version 4 (TCP/IPv4).

5. Click on Properties.

6. On General Tab, select Use the Following IP Address:

a. Enter 192.168.1.10 for the IP Address

b. Enter 255.255.255.0 for the Subnet Mask

c. Enter 192.168.1.1 for Default Gateway

7. Click on OK button and then exit out of all these open windows.

ote:N Configuration of IPv4 was done with Windows 10 in this guide.

Eaton

1000 Eaton Boulevard

Cleveland, OH 44122

United States

Eaton.com

Printed in USA

Publication No. IL158006EN / Z24391

November 2020

Eaton is a registered trademark.

All other trademarks are property

of their respective owners.

PX-SPD quick start guide

Instruction Leaet IL158006EN

Effective November 2020

Accessing the PX-SPD webpage

1. Open a web browser (e.g., Chrome).

2. Type in the Stored IP Address (e.g., 192.168.1.254) into a web browser search field.

ote:N When directed to unsecure site warning page, click advanced and proceed to site.

3. Log on to PX-SPD webpage with the following default parameters:

a. Username: admin

b. Password: Admin*1

4. Change password when prompted.

a. Make a note of the new admin password for future webpage access

5. Now you can view the status of the PX-SPD remotely. View the Instruction Manual for

steps to download the site security certificate to avoid the warning page in the future.

ote:N For more detailed instructions, refer to the integrated or side-mounted Instruction Manuals, IM01005019E and IM01005031E, respectively.

For more information, visit

Eaton.com/PXSPD

Sidemounted

instruction manual

SCAN ME

Integrated

instruction manual

SCAN ME

Sidemounted

technical data

SCAN ME

Integrated

technical data

SCAN ME

Cybersecurity

Guide

SCAN ME

Otros manuales para SPD Series

Este manual sirve para los siguientes modelos

Otros manuales de Protector contra sobretensiones de Eaton

Eaton

Eaton EM3SSK3T2 Manual de usuario

Eaton

Eaton Crouse-Hinds SD Series Guía del usuario

Eaton

Eaton SPI-35/440 Manual

Eaton

Eaton SPC Series Manual de usuario

Eaton

Eaton BUSSMAN Series Manual de usuario

Eaton

Eaton Memshield 4 Manual de usuario

Eaton

Eaton AFDD+ Manual

Eaton

Eaton Powerware SPDT60-255 Manual de usuario

Eaton

Eaton SPD Series Manual de usuario

Eaton

Eaton SPC Series Manual de usuario

Eaton

Eaton PXL Series Manual de usuario

Eaton

Eaton SPBT12-280/3 Manual

Eaton

Eaton BRSURGECSA Series Guía de instalación

Eaton

Eaton SPD Series Manual de usuario

Eaton

Eaton TRIPP LITE Series Manual de usuario

Eaton

Eaton Bussmann Series Manual de usuario

Eaton

Eaton AFDD+ Manual

Eaton

Eaton EBMAFDD24 Manual de usuario

Eaton

Eaton DSFi Manual de usuario

Eaton

Eaton PH Series Manual de usuario

Eaton

Eaton CVX050 Manual de usuario

Eaton

Eaton IM01005012E Manual de usuario

Eaton

Eaton Protection Box 5 Manual de usuario

Eaton

Eaton ESF Series Manual de usuario

Manuales populares de Protector contra sobretensiones de otras marcas

ELAC

ELAC ProteK PR91-W Manual de usuario

Tsubaki

Tsubaki TSM4000M1 Manual de usuario

QVS

QVS PP134C Manual de usuario

CyberPower

CyberPower CSP604T Manual de usuario

Davis Instruments

Davis Instruments Radio Surge Protector Manual de usuario

M-system

M-system MGA-100 Manual de usuario

CyberPower

CyberPower CSP706T Manual de usuario

CyberPower

CyberPower B300WRC1 Manual de usuario

M-system

M-system MGD-24 Manual de usuario

Leviton

Leviton 51120-3R Manual de usuario

Panamax

Panamax MAX 5400-EX Manual de usuario

CyberPower

CyberPower B1006T Manual de usuario

OBO Bettermann

OBO Bettermann ÜSM-20-230I1PE65 Manual de usuario

Minuteman

Minuteman MMS7120RCT Manual de usuario

Leviton

Leviton 52412-DS3 Manual de usuario

Savio

Savio LZ-07 Manual de usuario

Siemens

Siemens HNM3M120 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric LITOL LTM-125RF Manual de usuario