Eaton SG48-RC-LCD-30 Manual de servicio

CEAG Remote Display for Central Power Supply Systems

Mounting and Operating Instructions

Remote Display for Central Power Supply Systems

Target group, part 1: Qualified electrician acc. to EN 50110-1

Target group. part 2: Electrical instucted persons

2CEAG Remote Display for Central Power Supply Systems 40071860348 October 2019 www.ceag.de

1 General Information............................................... 3

2 Connection of a remote display............................. 3

3 Mounting options .................................................. 4

4 Operation............................................................... 6

4.1 All user menu ..................................................... 7

4.1.1 Monitor ............................................................. 7

4.1.2 System info ...................................................... 7

4.1.3 Language ......................................................... 7

4.1.4 Login ................................................................ 8

4.2 Admin main menu ............................................10

4.2.1 Display settings ..............................................10

4.2.2 Block and Reset Alarm...................................11

4.2.3 Test.................................................................11

4.2.4 Faults and Events ...........................................11

4.2.5 Conﬁg Parameters..........................................13

4.2.6 Features..........................................................19

4.2.7 Manage Account ........................................... 20

4.2.8 Logout ........................................................... 20

5 Servicing / Maintenance ..................................... 20

6 Disposal / Recycling............................................. 20

Notes .......................................................................21

General Safety instructions - devices ..................... 22

Contents

1 General Information 3

CEAG Remote Display for Central Power Supply Systems 40071860348 October 2019 www.ceag.de

1 General Information

The remote display is an optional accessory of SelvGuard Low

Power System (LPS) and it’s meant to ease the notiﬁcation of an

emergency lighting event from a remote location (i.e. a recepti-

on desk). It contains a back-lit graphical LCD with 128x64 pixels

resolution for increased clarity of information, 3 status LEDs

and a buzzer for acoustic reporting and notiﬁcation.

Navigation through the menu is done via a 5 way joystick (left,

right, up, down, press).

It can be ordered separately (see below ordering details) and it

can be installed in any stage of the project.

Remote display is an optional hardware which allows control

and visualization of the system remotely. When correctly wi-

red, Remote display will work without additional conﬁguration

(plug-and-play).

If Remote Display will be disabled at any time, reconnecting a

remote display to the system will not automatically enable

functionality. Functionality shall be enabled via Features menu

(4.6.2 Features).

Remote display provides a mirror display of SelvGuard local

display. Only the display logged in as Admin will operate at a

time. Normal operation will resume after logout or automati-

cally 5 minutes after back light time off (see section 4.2.8 Lo-

gout)

NOTE

Only one Remote display can be connected to one SelvGuard.

Figure 1- Remote display

SG48-RC-LCD-30 Remote display for

SG48, 30° mount.

base

SG48-RC-LCD-55 Remote display for

SG48, 55° mount.

base

2 Connection of a remote display

Figure 2- (1) Main display module; (2) 30°/55° inclined mounting base

The remote display is powered via the 24 V voltage supply of

the control unit inside the SelvGuard LPS.

ATTENTION!

Do not use an external supply for this module other than the

LPS!

NOTE

Observe national rules and regulations governing the indicating

and signalling behaviour when using a remote switch or a re-

mote indicator for emergency lighting systems.

1 General Information

4CEAG Remote Display for Central Power Supply Systems 40071860348 October 2019 www.ceag.de

3 Mounting options

The Remote display is supplied with a 30° or 55° inclined

mounting base for different mounting options.

To install Remote display, follow next steps:

Break knockouts from the mounting base using a tool.

Fix mounting base with screws on the wall or desk. If using

concealed cable, please run cable through the mounting base

ﬁrst.

Remote display 55°

wall side entrywall back entry desk

Remote display 30°

LEDs

LEDs User viewing side

User viewing side

Navigation switch

LEDs

User viewing side

Navigation switch

Figure 4- fixing mounting base

Figure 3 - break knockouts

3 Mounting options

CEAG Remote Display for Central Power Supply Systems 40071860348 October 2019 www.ceag.de

Run cable through designed bottom grommet.

For wall mounting installation, the base shall be mounted with

the grommet on the bottom side; for the desk mounting instal-

lation, the base shall be mounted with the grommet top side

like below ﬁgure.

Figure 6 - wall mounting installation (left), desk mounting installation (right)

Figure 5- installing concealed cable (left) or cable coming below (right)

Connect the cable to the Remote display terminal

Rotate the Remote display to almost 45°, push it against the

mounting base and turn it straight like below ﬁgures

Figure 8 - fixing main display module on mounting base

Figure 7 - Connect remote display terminals

3 Mounting options

6CEAG Remote Display for Central Power Supply Systems 40071860348 October 2019 www.ceag.de

4 Operation

Use the 5 way joy-stick to navigate through the menu (Up,

Down, Right, Left, Press)

5 way joystick

•

Up – scroll up through the menu or increment

value (when digit is blinking)

•

Down – scroll down through the menu or decre-

ment value (when digit is blinking)

•

Right – move cursor to next digit when editing or

jump to Back, Cancel, Ok button (when available

on the screen)

•

Left – move cursor to previous digit when editing

or jump to Back, Cancel, Ok button (when available

on the screen)

•

Press – enter selected menu, select/deselect any

row for editing, escape editing. When cursor is

on Back, Cancel or Ok button press joy stick for

action.

LCD actions buttons

•

Goes to previous menu

•

Save + go to previous menu

•

Goes to previous menu without saving

5-way joystick

Back

Cancel

Back

Cancel

Back

Cancel

Buzzer

Status LEDs LEDs status

Status LED

Operation mode

No failure Green On

Emergency Mode Red On + Yellow On

Delay on mains return

Green On + indication on LCD of

remaining time before normal

operation

Function/Duration Test Yellow On

Luminaire is blocked All LEDs are off

Error

message

Charging failure Red Blinking

Function test failed Red Blink + Yellow ON

4 Operation

CEAG Remote Display for Central Power Supply Systems 40071860348 October 2019 www.ceag.de

4.1 All user menu

Main menu is made up of 4 submenus:

- Monitor

- System Info

- Language

- Login

Monitor, System Info and Language menu is accessible for all

personel. Login submenu is only accessible to Admin and

User (housekeeper, facility manger, etc.).

Main Menu

Monitor

System Info

Language

Back

Cancel

4.1.1 Monitor

This screen is use to view

running parameters.

• Battery Voltage

• Charge Current

• Discharge Current

• Battery Temperature

• Battery 1 Voltage

• Battery 2 Voltage

• Battery 3 Voltage

• Battery 4 Voltage

• Battery SOC

• Load Voltage

• Load Current

• Load Power

• PSU1 Current (Only Admin

can view)

• PSU2 Current (Only Admin

can view and visible only for

900W and 1200W systems)

• PSU Voltage (Only Admin

can view)

Monitor

Batt. Vtg

52.00 V

Charge Crt

00.20 A

Discharge Crt

00.00 A

4.1.3 Language

Use joy-stick to select language menu where you can select/

change desired language. Available options are: English,

French and German.

Main menu

Monitor

System Info

Language

English

Français

Deutsch

4.1.2 System info

This screen shows system information regarding the controller

and the display:

Ver. – Hardware version of the system/display

SN. – Serial number of the system/display

Z-Number – Firmware number of the system/display

System Info

Ver. A

SN. 02550962

Z-Number Z1200.A

Display

Ver. A

Part No. 08899091

Z-Number Z1201.A

Back

Cancel

Back

Cancel

Back

Cancel

4.1 All user menu

8CEAG Remote Display for Central Power Supply Systems 40071860348 October 2019 www.ceag.de

4.1.4 Login

This screen is used to select different access levels, e.g. Ad-

min or User. At ﬁrst start-up User is deactivated. User can be

activated / deactivated when logged in as Admin from 6.2 Ad-

min main menu- Manage account.

The default password for Admin is 111111. The default pass-

word for User is 222222.

ATENTION

If the password is lost then follow the instructions mentioned

in Recover Password section.

NOTE

For enhanced safety of the system we recommend you to

change default password.

To change password, please follow instructions described in

chapter "4.2.5 Conﬁg Parameters". Change password

Admin Login and its Main Menu

In main menu screen press on Login option. It will switch in to

After successful login, Main Menu will show additional sub-

menus like below.

User Login and its Main Menu

If User is activated, you can login as User from Login menu.

To recover User password, enter Recover Password menu, go

to User and then enter Admin password. you'll be prompted to

select new user password.

Main menu

Monitor

System Info

Language

Back

Cancel

Admin

User

Recover Password

Back

Cancel

Admin vs. User

Menu Items Admin User No login

Monitor 

Test   

Faults and Events   

Config Parameters   

Features   

Display Settings   

System Info 

Block and Reset Alarm   

Language 

Manage Account   

4.1.4 Login

CEAG Remote Display for Central Power Supply Systems 40071860348 October 2019 www.ceag.de

Recover Password

Admin

User

Recover Password

Admin

User

Admin Password

Password:

******

Default Password

Password:

******

Change User Password

Password:

******

Change Admin Password

Password:

******

User Password

Set Successful

Admin Password

Set Successful

Back

Cancel

Back

Cancel

Back

Cancel

Back

Cancel

Back

Cancel

Back

Cancel

Back

Cancel

Back

Cancel

Back

Cancel

Back

Cancel

Recover Password

To recover password, ﬁrstly call/email your Eaton service cen-

ter and provide your details together with the controller Serial

Number. You'll ﬁnd serial number on the System Info page, un-

der SN. after you send this number to your service center, you

will receive a 6 digit password which you will need to enter in

the recover password menu. After correctly introducing the 6

digit password provided by the service team, you'll be promp-

ted to change the Admin password.

Recover Password

10 CEAG Remote Display for Central Power Supply Systems 40071860348 October 2019 www.ceag.de

4.2 Admin main menu

After Admin/User activation, additional menu features will be

available in the menu:

- Monitor

- Test

- Faults and Events

- Conﬁg. Parameters (only Admin)

- Features

- Display Settings

- System Info

- Block and Reset Alarm

- Language

- Manage Account

- Logout

4.2.1 Display settings

Use joy-stick to access Display Settings menu.

Here you can adjust brightness and contrast level, select

language, set buzzer function and adjust backlight On

time.

Brightness

Use joy-stick to select, adjust and store LCD brightness

level.

Contrast

Use joy-stick to select, adjust and store LCD contrast

level.

Buzzer

Use joy-stick to select, adjust and store buzzer functional-

ity. You can select out of four options: Mute, Low, Medium

and High.

By default, buzzer is muted. Enter Buzzer tab to activate

buzzer by selecting Low, Medium, High sound level. In

configuration mode the buzzer will sound for 2 seconds so

you can acknowledge the sound level. In case of an alarm

or fault the buzzer will sound for 5 seconds continuously

and LPS will show the respective LED information.

Backlight

Use joy-stick to set backlight switch off time.

By default, backlight is set to switch off after 2 minutes of

inactivity. Inactivity duration time can be configured from

1min to 10 min.

Main menu

Monitor

System info

Test

Faults and Events

Config Parameters

Features

Display settings

Mute

Low

Medium

High

Display settings

Brightness

55 %

Contrast

55 %

Buzzer

Low

Display settings

Brightness

55 %

Contrast

55 %

Buzzer

Mute

4.2 Admin main menu

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor de Eaton

Eaton

Eaton BreakerVisu NZM-XMC-MDISP35-MOD Manual

Eaton

Eaton XV400 10.4" Manual de usuario

Eaton

Eaton PXBCM-DISP-6-XV Manual de usuario

Eaton

Eaton XV400 Manual de usuario

Eaton

Eaton Cutler-Hammer IQ DP-4000 Manual de programación

Eaton

Eaton PXM4/6/8K Manual de usuario

Eaton

Eaton E5324E Series Manual de usuario

Eaton

Eaton PDI WaveStar Manual de instrucciones

Eaton

Eaton Power Xpert Branch Circuit Monitor Manual de usuario

Eaton

Eaton PXMP Series Manual de usuario

Eaton

Eaton EASY-RTD-DC-43-03B1-00 Manual de usuario

Eaton

Eaton PXM468K-DISP-6-XV Manual de usuario

Eaton

Eaton XV400 5.7" Manual de usuario

Eaton

Eaton Cutler-Hammer Pow-R-Command 750 Manual de usuario

Eaton

Eaton POW-R-COMMAND 1000 Manual de usuario

Eaton

Eaton XV360 Manual de usuario

Eaton

Eaton XV-102 Series Manual

Eaton

Eaton Power Xpert Multi-Point Manual de usuario

Eaton

Eaton MFD-Titan Manual de usuario

Eaton

Eaton PanelMate Power Series Manual de operación

Eaton

Eaton MFD-XM-80 Manual

Eaton

Eaton MFD4-5-XRC-30 Manual

Eaton

Eaton MFD-Titan MFD-80 Series Manual

Eaton

Eaton EASY-RTD-DC-43-03B1-00 Manual

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación