Eastwood 11797 Manual de usuario

4" THROATLESS

SHEARS

INSTRUCTIONS

Item #11797

The Eastwood 4” Throatless Shear for metal cutting is precision designed

and manufactured to allow precise control when making straight or intricately

curved cuts of any length, in any direction.

Hardened, fi nely honed blades produce clean, burr-free cuts in aluminum,

steel and other mild metals. The gear-driven, design delivers maximum

shearing power with minimal handle force.

position with the Locking Pin inserted through both

the Upper Blade Housing and the Body in the

CLOSED position (FIG A). The weight of the handle left

in the up position can cause the upper blade to suddenly

INCLUDE

(1)

4” Metal Shear Body (1) Safety Chain & Pin

(1)

17” Handle

SPECIFICATIO

Maximum material cutting thickness: 14 Gauge•

READ

INSTRUCTIONS!

• Read this entire manual before set up and use.

• Keep this manual in a safe location as it will be necessary to refer to it often.

INJURY

HAZARDS!

• WARNING

This tool has

EXTREMELY

SHARP cutting blades with amplified

leverage on the upper blade which can

quickly cause severe injury or loss of

fingers!

Keep fi ngers and hands away

from

moving parts when operating and always

keep blades closed with the Locking Pin

inserted through both the Upper Blade

Hous-

ing and the Body in the

position

(FIG

)

when the tool is not in use.

Wear thick, well fi tting work gloves to• prevent cuts from sharp metal.

Frequently inspect blades. If cracks or chips• develop, discontinue tool use immediately

and replace damaged

blades.

• Always place the handle in the down

SAFETY

INFORMATION

FIG. A

FIG. A1

Ope

STORAGE

•Lower the Upper Blade assembly, insert the Locking Pin through both

the Upper Blade Housing and the Body in the CLOSED position (FIG

A). and Remove Handle.

•Apply a thin fi lm of light oil or a rust-preventive product to all bare steel

areas. CAUTION! The blades are extremely sharp! Use extreme care

when handling to avoid severe cuts or loss of fi ngers!

•Store in a clean, dust-free, dry, dampness free area preferably covered

with plastic sheeting.

MAINTENANCE

NOTE: Maintenance should be performed before each use.

•Check tightness of all hardware.

•Check operation for binding. Lubricate pivot points and gears

periodically with a medium bodied lubricating oil.

•Inspect Blades for cracks, damage or premature wear. Replace if

damaged.

•Clean dirt and debris from Shear Deck.

TROUBLESHOOTING

•PRODUCES A ROUGH, JAGGED CUT:

- Blades out of adjustment. Follow adjustment procedure.

- Worn Blades. Replace blades.

- Material too thick.

•FAILS TO CUT:

- Blades out of adjustment. Follow adjustment procedure.

- Worn Blades. Replace blades. - Material too thick.

ADDITIONAL ITEMS

#11798 Replacement Blades

Tabla de contenidos

Otros manuales de Herramientas eléctricas de Eastwood

Eastwood

Eastwood 31753 Manual de usuario

Eastwood

Eastwood 32290 Manual de usuario

Eastwood

Eastwood 30216 Manual de usuario

Eastwood

Eastwood 21640 Manual de usuario

Eastwood

Eastwood 11737 Manual de usuario

Eastwood

Eastwood 51460 Manual

Eastwood

Eastwood 31483 Manual de usuario

Eastwood

Eastwood 21749 Manual de usuario

Eastwood

Eastwood Perfect Panel Prep Tool Manual de usuario

Eastwood

Eastwood 54442 Manual de usuario

Eastwood

Eastwood 13475 Manual de usuario

Eastwood

Eastwood 20644 Manual de usuario

Eastwood

Eastwood 21304 Manual de usuario

Eastwood

Eastwood 20198 Manual de usuario

Eastwood

Eastwood 33862 Manual de usuario

Eastwood

Eastwood 14041 Manual de usuario

Eastwood

Eastwood 31338 Manual de usuario

Eastwood

Eastwood 2-PS Manual de usuario

Eastwood

Eastwood 13630 Manual de usuario

Eastwood

Eastwood 54441 Manual de usuario

Eastwood

Eastwood 13650 Manual de usuario

Eastwood

Eastwood 21560 Manual de usuario

Eastwood

Eastwood B60 Manual de usuario

Eastwood

Eastwood 31752 Manual de usuario

Manuales populares de Herramientas eléctricas de otras marcas

AEG

AEG OMNI-JS Manual de usuario

SIP

SIP 01533 Manual de usuario

Ribimex

Ribimex PRS499 Manual de usuario

3M Fiber Optic Connector Crimp Tool Manual de usuario

Ryobi

Ryobi P524 Manual de usuario

ROJEK

ROJEK FSN 300A Manual de usuario

Kemper

Kemper 1740PRO Manual de usuario

WABCO

WABCO OptiTire Manual de usuario

EINHELL

EINHELL TE-MS 18/210 Li Manual de usuario

Orgapack

Orgapack OR-T 85 Guía rápida

TOUGHCUT

TOUGHCUT Diamond 400 Manual de usuario

Yaros

Yaros PB-3603 Manual de usuario

Fein

Fein BSS 2.0 E Guía de configuración

Baileigh Industrial

Baileigh Industrial SS-2725 Manual de usuario

Milwaukee

Milwaukee 2674-20 Manual de usuario

Fein

Fein BLs 1.6 Manual de usuario

Princess

Princess Electric Multi Sharpener Manual de usuario

FOREDOM

FOREDOM K.1050 Manual