EARNSHAW NASMYTH Manual de usuario
Vol.1.06 EN
INSTRUCTION
MANUAL
Congratulations
on your purchase of this nely
crafted Earnshaw Timepiece.
You are now the owner of a
timepiece that draws its roots from
the renowned English horologist,
clock and watch maker
Thomas Earnshaw
1749 - 1829
A) DISPLAY
MECHANICAL
AUTOMATIC
2 HANDS
WITH DUAL TIME
This timepiece is equipped with
a self-winding Mechanical
Automatic movement.
It does not need a battery.
It is powered by the motions of the
user’s own wrist during the wear of
the watch.
You may also choose to wind the
watch manually.
For more details on operating this
timepiece please refer to the enclosed
booklet or visit :
IM.THOMAS-EARNSHAW.COM
Dual Time
Minute Hand
Of Home Time
Hour Hand
of Home Time
Sun & Moon
Display
0 1
Crown
Fly-Wheel
1
C) TIME SETTING
1. Pull the crown to Position 1.
2. Turn the crown clockwise to set
the Home Time.
3. As the center hands move, the Sun
& Moon Display also moves
correspondingly.
4. Push the crown back to Position 0
after setting the time.
B) WINDING
THE MAINSPRING
Automatic winding watch can be
hand wound by turning the crown in
it’s normal crown position.
Wind 5-10 times and it will start to
move naturally after shaking slightly.
2 3
10
01
D) DUAL TIME SETTING
1. Pull the crown to Position 1.
2. Turn the crown anti-clockwise to
set the Dual Time. (The dual time
hand at 9 o’clock position will
move clockwise simultaneously.)
3. Turn the crown clockwise to set
the Home Time.
4. Push the crown back to position 0
after setting the time.
NOTE:
This watch MUST be worn for at
least 8 (Eight) hours each day to
ensure it is fully wound.
An automatic watch will only wind
when the watch is on your wrist and
your arm moves.
Winding the watch by the crown will
put power on the spring but not
enough to allow the watch to
function fully.
If your watch stops overnight or
loses time it means it is not being
fully wound.
45
10
01
WATER RESISTANCE
The water resistance indicated on
your timepiece serves only as a
guide. Actual water resistance may
vary depending on a number of
important factors including
temperature, water salinity, and
actual use under water.
The water resistance of your
timepiece may eventually be
compromised over time with general
wear and tear and the use of your
watch under adverse conditions.
Always remember to employ the
screw down crown (if available) to
maintain the water resistance of your
timepiece. Warranty may be voided if
the screw down crown has not been
properly employed.
Note that you should NEVER wear
your watch in a jacuzzi, hot shower or
steam room where steam may enter
the case despite the watertight seals
used to protect your watch.
The steam may cause condensation
inside your watch, which may affect
and damage the inner workings of
your watch – which would also not be
covered by the warranty.
6 7
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Mirar de EARNSHAW
EARNSHAW
EARNSHAW London Manual de usuario
EARNSHAW
EARNSHAW ES-0016 Manual de usuario
EARNSHAW
EARNSHAW ES-8046 Manual de usuario
EARNSHAW
EARNSHAW London Manual de usuario
EARNSHAW
EARNSHAW TOURBILLON LIMITED EDITION Manual de usuario
EARNSHAW
EARNSHAW ES-8066 Manual de usuario
EARNSHAW
EARNSHAW ES-8083 Manual de usuario
EARNSHAW
EARNSHAW ES-8058 Manual de usuario
EARNSHAW
EARNSHAW ES-0019 Manual de usuario
EARNSHAW
EARNSHAW ES-8083 Manual de usuario
