EARDATEK KINGSAT KM-V3 Manual de usuario

KINGSAT Satellite TV Antenna System

www.kingsat-tech.com

sales@kingsat-tech.com

KINGSAT Satellite TV Antenna System

Table of Contents

1. INTRODUCTION..................................................................................... 3

1.1 Introduction to KINGSAT KM-V3/V4/V6/V7.................................3

1.2 Features of KINGSAT KM-V3/V4/V6/V7....................................... 3

2. INSTALLATION........................................................................................ 5

2.1 Preparation................................................................................... 5

2.2 Planning the Installation...............................................................6

2.3 Installation and Mounting of Antenna.........................................7

2.4 Installing the ACU....................................................................... 12

3. OPERATION INSTRUCTION.................................................................. 16

3.1 Introduction................................................................................ 16

3.2 Operating the ACU......................................................................17

3.3 Error Code and Solutions........................................................... 28

4. PREPARATION FOR TRANSPORTATION................................................29

KINGSAT Satellite TV Antenna System

1. INTRODUCTION

1.1 Introduction to KINGSAT KM-V3/V4/V6/V7

KINGSAT KM-V3/V4/V6/V7 is a digital satellite antenna system. It’s designed for all

types of vessels to automatically search, track and capture satellite signal from the

Digital Video Broadcasting (DVB) compatible satellites.

Figure 1: Maritime Satellite TV Antenna

1.2 Features of KINGSAT KM-V3/V4/V6/V7

KINGSAT Satellite TV Antenna System

Strong Signal Receiving performance

Using self-made LNB and RF processing components, which offers the best reception

quality and maximum antenna performance.

Fast Satellite Search and Position

An integrated GPS antenna allows for the antenna control system to update the GPS

data automatically for accurate positioning and faster satellite locking.

Excellent Anti-Heavy Sea Tracking Ability

Proprietary algorithm, advanced mechanical design, embedded GPS and

high-sensitive gyro enable always-lock connectivity and worldwide deployment.

Expendable Worldwide Satellite Library

The ACU is installed with Worldwide satellite database and can be easily revised or

expended manually.

Easy-to-install Aesthetic Design

Simple installation and setup design with aesthetic maritime white of

environment-resistant feature save labor and maintenance costs.

KINGSAT Satellite TV Antenna System

2. INSTALLATION

2.1 Preparation

Standard components

Antenna Unit*1

Antenna Control Unit(ACU)*1

24V/3A Adapter for ACU*1

Hex head bolt , Spring washer , Flat washer , Nut , Mounting bracket , Tapping screw

Cables:

15-meter coaxial cable * 2

Power cable*1

*M8 is applicable on V3/V4/V6, M12 is applicable on V7.

Figure 2: Required Tools for Installation

KINGSAT Satellite TV Antenna System

2.2 Planning the Installation

Antenna Unit

Install the antenna in accordance with the following procedures to ensure maximum

performance of the antenna.

The antenna must be installed at the position:

(1) It has an all-around clear view of the horizon.

(2) There are no obstacles within 1 degree above the antenna.

(3) Far away from the Radar.

Figure 3: Position of Radar and Antenna

(4) The mounting platform should be firm enough and not subjected to excessive

vibration.

Figure 4: Elevation Limit of Obstacles

KINGSAT Satellite TV Antenna System

Cables

Cables must be routed correctly. Before installing the system cables, consider the

following points:

(1) All cables need to be well clamped and protected from physical damage and

exposure to heat and humidity.

(2) Do not bend cables excessively.

(3) Where a cable passes through an exposed bulkhead or deck head, a watertight

grommet or swan neck tube should be used.

Power Requirement

Following the power requirement to avoid damage to the system. KINGSAT

KM-V3/V4/V6/V7 has been designed to work on a boat which power supply is in the

range of 110-240V AC.

RF Cable

This cable is supplied at a length of 15m.If longer length is required you should

replace this cable with an extended RF cable supplied by Earda Technologies.

Note: Exceeding the indicated cable length will result in reduced performance of your

system.

2.3 Installation and Mounting of Antenna

The method of installation mounting of antenna may be due to vessel design but the

following procedures are applicable in most situations, and will result in a secure and

effective installation.

Confirmation of Size Prior to Installation

(1) Check the height and diameter of the bottom surfaces of the antenna before

installing.

(2) The space must be sufficient for installing the antenna unit considering the

height and diameter of the antenna.

(3) The height and the diameter of the bottom surface of the antenna are as shown

in the following drawings.

Note: Before installing the antenna, open the radome and remove the shipping

constraints from the antenna interior.

KINGSAT Satellite TV Antenna System

Figure 5.1: Radome Dimension of KM-V3 Figure 5.2: Radome Dimension of KM-V4

Figure 5.3: Radome Dimension of KM-V6 Figure 5.4: Radome Dimension of KM-V7

KINGSAT Satellite TV Antenna System

Confirming of the Antenna Mounting Position

Referring to the mounting template, mark where antenna will be mounted on board

(it must be a flat surface) or on a separate power tower.

Note: Exposed cable must be protected because an exposed cable may cause electric

shock and cause serious damage to the equipment.

Figure 6.3: Mounting Hole Position of KM-V6 Figure 6.4: Mounting Hole Position of KM-V7

Figure 6.1: Mounting Hole Position of KM-V3

Figure 6.2: Mounting Hole Position of KM-V4

KINGSAT Satellite TV Antenna System

Connection of the Cable

Remove the rubber cap from RF connector. Connect the RF cable to the RF connector

at the bottom of the base plate through the access hole using an adjustable spanner.

Be careful not to over tighten and damage the connector.

Note: Do not tighten excessively when using the spanner, it will damage the threads.

Be careful that the connectors do not touch the mounting surface of the antenna, it

might cause a critical malfunction and serious damage to the equipment.

Figure 7: Connectors on Bottom of Antenna

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Antena de EARDATEK

EARDATEK

EARDATEK KINGSAT Z3 Instrucciones de funcionamiento originales

EARDATEK

EARDATEK KINGSAT M8 Instrucciones de funcionamiento originales

EARDATEK

EARDATEK KINGSAT P6A Instrucciones de funcionamiento originales

EARDATEK

EARDATEK KINGSAT Maritime VSAT P8 Instrucciones de funcionamiento originales

EARDATEK

EARDATEK KINGSAT Maritime VSAT P8 Instrucciones de funcionamiento originales

Manuales populares de Antena de otras marcas

Alfa Network

Alfa Network APA-L01 Manual de usuario

Naval

Naval PR-422CA Manual de usuario

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manual de usuario

TERK Technologies

TERK Technologies TV44 Manual de usuario

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manual de usuario

HP J8999A Manual de usuario

MobilSat

MobilSat MSP-S Manual de usuario

Steren

Steren ANT-UHF 13 Manual de usuario

Novatel

Novatel 600-G Manual de operación

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manual de usuario

TRENDnet

TRENDnet TEW-AO12O Manual de usuario

Radio Shack

Radio Shack 15-1837 Manual de usuario

CommScope

CommScope CMAX-OMFX-43M-I53 Manual de usuario

Ramsey Electronics

Ramsey Electronics DAP25 Manual de usuario

COBHAM

COBHAM SAILOR 800 VSAT Manual de uso y cuidado

Trango Systems

Trango Systems AD900-9 Manual de usuario

Steren

Steren ANT-100 Manual de usuario

Proxim

Proxim 5054-PA-23 Manual de usuario