EAE Miola Touch Panel 10 Manual de usuario
EAE KNX Touch Panel 10” Quick Start Guide
Miola Touch Panel 10”
EAE KNX Touch Panel 10” Quick Start Guide
Miola Touch Panel 10”
TOUCH PANEL
www.eaetechnology.com
2. Connect cables to related connectors
3. Adjust Magnets for perfect fit
4. Mount Touch Panel
Switch o mains voltage
before connecting cables
Mounting Magnet
wall
box
panel
EAE Teknoloji Araştırma ve Geliştirme A.Ş.
İkitelli O.S.B. Ziya Gökalp Mh. Eski Turgut Özal Cd. No:20 Başakşehir İstanbul Türkiye
Touch Panel is configured via built-in web interface. It has dual Ethernet network interfac-
es which use DHCP by default.
Connect Touch Panel to a network that has DHCP server via home or building network.
Go to Settings in Touch Panel user interface and then get IP address of Touch Panel.
Enter IP address to web-browser, then enter username and password
Default username: webAdmin Default password: wa1234
If you need support in further steps, visit www.eaetechnology.com and check Miola
Product Manual.
EAE KNX Touch Panel 10” Quick Start Guide
Miola Touch Panel 10”
EAE KNX Touch Panel 10” Quick Start Guide
Miola Touch Panel 10”
PRODUCT OVERVIEW REAR VIEW
Miola Touch Panel is designed as all-in-one controller to meet needs for residential buildings.
It works as smart home controller and monitoring panel, SIP Intercom Indoor Panel and
Security Panel in today’s and tomorrow’s smart homes.
Smart Home Controller: Touch Panel can be connected to multiple interfaces to control and
monitor smart devices from dierent protocols.
Intercom Indoor Panel: It is compatible with SIP Protocol which is mostly used communication
protocol in IP intercom system. Thus Touch Panel can work as indoor Intercom Panel in SIP
Intercom Networks.
Security Panel: Touch Panel has built-in digital inputs which can be connected to security
sensors. Then Touch Panel can work as security panel to satisfy basic needs for security
solutions.
FRONT VIEW CONFIGURATION
INSTALLATION
TOP VIEW
touch panel
microphone
lcd
speaker
208.00
264.00
54.65
264.00
1. Power Supply: 12V- 30V DC
2. USB Mini: Reserved for debugging
3. USB-C: Reserved for programming
4. ETH0: Building network. Connection to intercom
clients, smart devices and internet access in building.
5. ETH1: Home network. Connection to smart devices,
intercom clients and internet access at home
6. Inputs (I1-I5): Digital Inputs
7. KNX: Connection to KNX-TP bus line
Note: Miola Touch Panel is able to connect to two
dierent IP networks at the same time. This feature
allows to isolate home and building networks in
buildings.
208.00
264.00
1
3
2
4
5
7
6
wall
box
side front
1. Insert Miola Touch Panel 10” Mounting Box
Mounting Box should be
aligned vertically
Mounting Box sold separately.
Mounting Box dimensions:
127mm x 217mm x 60mm
Otros manuales de Panel táctil de EAE
Manuales populares de Panel táctil de otras marcas
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manual de usuario
YASKAWA
YASKAWA TP 610C Manual de usuario
B&R
B&R Power Panel C Series Manual de usuario
Beijer Electronics
Beijer Electronics X2 control Manual de usuario
AXIOMTEK
AXIOMTEK GOT321W-521 Manual de usuario
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manual de usuario
