8
Push the right arrow until the display reads
OPERATING MODE/ 1 x N (M) MODE.
Please see page 9 for detailed instructions to
determine the Number of Pulses (N) Per Water
Meter Signal.
Pulse/Stroke Volume is calculated in relation to
the pressure in the irrigation line. Use the values
below to determine volume.
Push the down arrow to enter into the program.
Use the right arrow button to enter number of
pulses for each gallon of water. Press the down
arrow to save the settings.
Push the START/STOP button to begin the
program operation.
You can now turn on the irrigation water to begin
operation of the system using the water meter.
7 8
910
See operating manual for complete
instructions and safety standards.
When connecting a metering pump either to a
public water supply or to its own water source,
you must respect the regulations in force
concerning protection of the source
i.e. backflow prevention, etc.
!CAUTION
Micro-Doser Kit Installation
NEED HELP? CALL 1-800-451-6628
PUMP
MODEL PSI Single Pulse
Volume (mL)
Maximum
Volume (mL)
0110
30 0.23 41.4
35 0.22 39.6
40 0.22 39.6
45 0.21 37.8
50 0.21 37.8
55 0.20 36
60 0.19 34.2
65 0.19 34.2
70 0.18 32.4
Pump Programming
11
