Dyconn XCarger 5000 Manual de usuario
1
TM
Introduction
The Dyconn XCharger is a portable battery bank
for all your mobile devices and accessories. The
XCharger has the impressive capability of charging
two devices at the same time. As a measure of
convenience, the XCharger features four bright LED
lights that serve as a battery indicator to show the
amount of charge left in the unit. The XCharger
automatically shuts down when not in use to
save power.
Package Contents:
• XCharger Device
• Micro USB Cable
• Mini USB Cable
• USB Sync/Charge Cable
(compatible with Apple devices)
• Instruction Guide
Product Features:
• 2 USB output
• Powerful with Long Operation Time
• Portable and Convenient
• Power-Saving Function
• Long Life Cycle
• 5000 & 7800 Rapid charge (for iPad)*
*When charging with only 1 port
• 10000 Rapid charge (for iPad)*
*When charging only with the 2.1A port
Specications:
Model: 5000mAh
• USB 1 Output 5V/1A
• USB 2 Output 5V/1A
• Input 5V/1A max
• Capacity 5000mAh
• Cell Type Polymer Lithium-Ion
Battery
• Dimension (W*H*D) 3.75” x 2.45” x 0.8”
(95 x 62 x 21mm)
• Weight 4.4 oz. (124g)
• Charging Time 6 Hours
• Charge/Discharge 500 times
Life Cycle
• OperatingTemperature -10˚C~45˚C
Specications:
Model: 7800mAh
• USB 1 Output 5V/1A
• USB 2 Output 5V/1A
• Input 5V/1A max
• Capacity 7800mAh
• Cell Type Polymer Lithium-Ion
Battery
• Dimension (W*H*D) 3.75” x 2.45” x 0.9”
(95 x 62 x 23mm)
• Weight 6.34 oz. (180g)
• Charging Time 8 Hours
• Charge/Discharge 500 times
Life Cycle
• OperatingTemperature -10˚C~45˚C
Specications:
Model: 10,000mAh
• USB 1 Output 5V/1A
(Dedicated Port)
• USB 2 Output 5V/2.1A
(Dedicated Port)
• Total Max Output 3.1A (Dual Ports)
• Input 5V/2A max
• Capacity 10,000mAh
• Cell Type Polymer Lithium-Ion
Battery
• Dimension (W*H*D) (5.23” x 2.75” x 0.8”)
(133 x 70 x 22mm)
• Weight 8.8 oz. (240g)
• Charging Time *6 Hours~11Hours
*(5V/2A power adapter
sold separately)
• Charge/Discharge 500 times
Life Cycle
• OperatingTemperature -10˚C~45˚C
Protection:
Protection: Smart chip protection, overcharge
protection, overload protection, overheat protection
and short circuit protection.
Extended Usage
XCharger Charging Output
Using the XCharger affords different charging output
depending upon the device that is being charged.
Therefore, the following information provides insight
as to the charging capability of the XCharger based
on product type.
The extended usage of the Dyconn XCharger is
dependent upon your device. Due to the diversity of
electronic devices, they inherently possess variances
of mAh (1000-11000mAh) which determines
charging capacity.
Getting Started
Thank you for purchasing the Dyconn XCharger
5000, 7800, 10,000. The Dyconn XCharger charges
your iPad, tablet, PDA, iPhone, smart phone, mobile
phone, MP3 player, mobile game system, and
almost any device that can be charged via USB
cable connection.
The Dyconn XCharger 5000 and 7800 offers load
balancing. The total output on a single port is 2.1A,
but when using the dual ports, it will split the output
to 1.0A to each port. To fully charge an iPad or tablet,
one port must be used as it requires 2.1A. You can
use either port to charge your iPad or tablet.
The Dyconn 10000 charges two devices at the same
time with a maximum output of 3.1A. Use either of
the designated ports (1.0A or 2.1A) based on your
preferred charging method. To fully charge an iPad or
tablet, use the designated 2.1A port.
Product Part Identication
1. LED Indicator 4. USB Output Port 2
2. Power Button 5. Micro USB Port
3. USB Output Port 1
1.
2.
3.
5.
4.
7800 Model Shown
Getting Started
Product Part Identication (Continued)
XCharger Cables
1. USB Sync/Charge Cable 2. Micro USB Cable
(compatible with Apple devices)
3. Mini USB Cable 4. Power Adapter
(sold separately)
1.
3.
2.
4.
Operating Your XCharger
Checking Battery Life
You have the option of checking the remaining
battery life (charge) left in the XCharger. To check
the remaining battery life, simply push the Power
button while the Dyconn XCharger is connected to
any device.
1. One LED indicate 0% - 25% power
2. Two LEDs indicate 26% - 50% power
3. Three LEDs indicate 51% - 75% power
4. Four LEDs indicate 76% - 100% power
1. 2. 3. 4.
Operating Your XCharger
Charging your XCharger
You can charge the Dyconn XCharger with the
included Micro-USB to USB cable. Just plug the
Micro-USB cable into the Micro-USB input port, and
the other end into your computer’s USB port. If you
have a USB wall plug style adapter or a USB car
adapter, you can use these as well.
The LED status indicators show the current charging
status of the Dyconn XCharger. The 4th LED will
show a solid blue light when charging. (Waiting on
complete charge LED).
Note:
TheDyconnXChargermustbechargedpriortorst
use and may become warm during charging and use.
Connecting Your XCharger to your Device
Attach your device using the provided adaptors or
your USB charging/sync cable (not included) to the
Dyconn XCharger. Once USB cable is attached, push
the Power Button once, turning it “ON”. Depending
on the device, the XCharger will either power or
charge it. If it detects no device is connected within 10
seconds, it will automatically shut down.
Caution:
When not in use, unplug the Dyconn XCharger from
all cables and devices. Do not drop. Recycle or
dispose of the Dyconn XCharger properly. If disposed
ofinreorashortcircuit,theDyconnXChargermay
leak or explode, causing personal injury.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Manuales populares de Paquete de baterías de otras marcas
IOGear
IOGear GBP24V Series Manual de usuario
Inventus Power
Inventus Power PROTRXion S-12V100-TRX-HD Manual de usuario
Clas Ohlson
Clas Ohlson PW-290A Manual de usuario
EINHELL
EINHELL MULTI-Ah Power X-Change Plus Manual de usuario
Samsung
Samsung EB-U3300 Manual de usuario
ECTIVE
ECTIVE LC Series Manual de usuario