DVS Clipster Instrucciones de instalación
CLIPSTER Hardware Guide (Version 2.0)
Video Workstation
CLIPSTER
Hardware Guide
Hardware Guide Version 2.0 for CLIPSTER
Copyright © 2006 by DVS Digital Video Systems GmbH, Hanover. All rights reserved.
The manuals as well as the soft- and/or hardware described here and all their constituent parts are
protected by copyright. Without the express permission of DVS Digital Video Systems GmbH any
form of use which goes beyond the narrow bounds prescribed by copyright legislation is prohibited
and liable to prosecution.
This particularly applies to duplication, copying, translation, processing, evaluation, publishing, and
storing and/or processing in an electronic system.
Specifications and data may change without notice. We offer no guarantee that this documentation
is correct and/or complete. In no event shall DVS Digital Video Systems GmbH be liable for any
damages whatsoever (including without limitation any special, indirect, or consequential damages,
and damages resulting from loss of use, data, or profits, or business interruption) arising out of the
use of or inability to use the hardware, software and/or manual materials.
Those parts of this documentation that describe optional software or hardware features usually
contain a corresponding note. Anyway, a lack of this note does not mean any commitment from
DVS Digital Video Systems GmbH.
CLIPSTER is a registered trademark of DVS Digital Video Systems GmbH. Windows is a registered
trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Any other product names mentioned in this documentation may be trademarks or registered trade-
marks of their respective owners and as such are subject to the usual statutory provisions.
Headquarters:
Support:
For the Americas:
Support:
DVS Digital Video Systems GmbH
Krepenstr. 8
30165 Hannover
GERMANY
Phone: +49-511-67807-0
Fax: +49-511-630070
E-mail: [email protected]
Internet: http://www.dvs.de
Phone: +49-511-67807-25
Fax: +49-511-67807-31
E-mail: [email protected]
U.S. Headquarters:
DVS Digital Video, Inc.
300 East Magnolia Boulevard, Suite 102
Burbank, CA 91502
USA
Phone: +1-818-846-3600
Fax: +1-818-846-3648
E-mail: [email protected]
Internet: http://www.dvsus.com
E-mail: [email protected]
Registration Form
Dear customer,
this product was developed and tested thoroughly. Unfortu-
nately, the possibility of problems and errors can never be ruled
out. To support us in helping you as fast as possible if such a
case occurs, please fill in this registration form and send or fax
it to the address on the right.
You may also use our online registration form which can be accessed from the following
internet page: http://www.dvs.de/english/support/support.html
Customer
Name:
Company:
Contact:
Address:
Phone:
Fax:
Vendor:
CLIPSTER
Serial No.:
Remarks:
Connected devices
(Brand and type of edit controller, VTR, color grading system, etc.)
PLEASE SEND TO:
DVS GmbH
Krepenstr. 8
30165 Hannover
GERMANY
Fax: +49-511-630070
i
C
Contents
1Introduction ............................................................................... 1-1
1.1 Overview ............................................................................. 1-4
1.2 Target Group ........................................................................ 1-5
1.3 Conventions Used in this User Guide.................................... 1-5
1.4 Safety Instructions ................................................................ 1-6
1.5 Important Notes ................................................................... 1-8
2Overview .................................................................................... 2-1
2.1 Hardware Variants of CLIPSTER............................................ 2-2
2.2 Overview of the Front .......................................................... 2-3
2.2.1 The Front of the Video System...................................... 2-3
2.2.2 Operation Items .......................................................... 2-4
2.2.3 LEDs .......................................................................... 2-5
2.2.4 Faceplate ................................................................... 2-7
2.2.5 DVD Drive ................................................................. 2-9
2.3 Overview of the Rear ......................................................... 2-10
2.3.1 Main System Rear ..................................................... 2-10
2.3.2 Disk Array Rear ......................................................... 2-11
2.4 Connectors in Detail ........................................................... 2-13
2.4.1 Digital Video I/Os ..................................................... 2-13
2.4.2 Main Connector Panel ............................................... 2-14
2.4.3 Slot Panel Connectors (Main System) .......................... 2-17
2.4.4 ATX Connector Panel................................................. 2-20
2.4.5 Slot Panel Connectors (Disk Array) .............................. 2-21
3Installation ................................................................................. 3-1
3.1 One-Chassis Setup ............................................................... 3-2
ii
CLIPSTER Hardware Guide
3.2 Two-Chassis Setup ............................................................... 3-3
4Operation ................................................................................... 4-1
4.1 Starting the Workstation....................................................... 4-2
4.1.1 Starting a One-Chassis Setup ........................................ 4-2
4.1.2 Starting a Two-Chassis Setup ........................................ 4-2
4.2 Shutting Down the System ................................................... 4-3
4.2.1 Shutting Down a One-Chassis Setup ............................. 4-3
4.2.2 Shutting Down a Two-Chassis Setup.............................. 4-4
5Maintenance .............................................................................. 5-1
5.1 Hard Disk Maintenance ........................................................ 5-2
5.1.1 Replacing a Hard Disk .................................................. 5-2
5.1.2 Setting Up the Stripe Set .............................................. 5-5
5.1.3 Formatting the Video Hard Disks ................................... 5-6
5.2 Opening and Closing the Casing(s) ...................................... 5-7
5.2.1 Opening a Casing ....................................................... 5-7
5.2.2 Closing a Casing ......................................................... 5-7
5.3 Fan Maintenance.................................................................. 5-8
5.4 Power Supply Maintenance ................................................ 5-11
AAppendix ....................................................................................A-1
A.1 Troubleshooting ...................................................................A-2
A.2 Technical Data ......................................................................A-4
A.3 Hardware Specifications .......................................................A-5
A.4 Video Rasters .......................................................................A-7
A.5 Signal In- and Outputs .........................................................A-8
A.6 Internal Wiring from Video Board to Outputs .....................A-13
A.7 Packing Instructions............................................................A-14
A.8 Conformity Declarations .....................................................A-16
A.8.1 RoHS Compliance .....................................................A-16
A.8.2 EC Declaration of Conformity (CE Marking) .................A-16
A.8.3 FCC Compliance Statement ........................................A-17
IIndex............................................................................................. I-1
Otros manuales para Clipster
3
Tabla de contenidos
Otros manuales de De oficina de DVS
