DVDO High Definition Video Processor & Hub Edge Manual de usuario

DVDO EDGE

High Definition Video Processor & Hub

Setup Guide

Version 1.0

This Setup Guide presents setup and configuration guidance for

DVDO EDGE in summary form. For more complete information

please refer to the DVDO EDGE Product Manual

included on the CD.

Customer Support Information

email: [email protected]

phone: 1-877-382-EDGE (1-877-382-3343)

web site: www.dvdo.com/edge

Check the web site for news and updates for your DVDO EDGE

To learn about VRS Video Processing Technology, visit

http://www.anchorbaytech.com/vrs_technology/

DVDO by Anchor Bay Technologies

983 University Avenue, Building A

Los Gatos, California 95032 USA

System Configuration: Most people will use one of the two configurations shown on this page and the next.

Digital Display Using Built-in Audio

For this configuration to work, your display should have HDMI input and built-in audio. Connect your source components (DVD Player,

Set Top Box, Game console, etc.) to EDGE’s inputs. Connect EDGE’s Video/Audio HDMI output to your display.

The DVDO universal remote can control EDGE and up to 7 other components in your system.

Digital Display with a Separate AV Receiver

This configuration features a separate AV Receiver for audio processing. Your Display must have either an HDMI or DVI input. If the

Display has DVI input, you will need an HDMI to DVI adapter cable. Your AV Receiver can be connected using HDMI or Optical cables.

Details of the Display and AV Recveiver connections are shown on the next page.

EDGE Output Connections

DVDO Edge -- Rear View of output Connectors

Connect your TV to

the Video/Audio output.

1. If you don’t have an AV Receiver, skip to # 2.

If your AV receiver has HDMI input,

connect an HDMI cable from Edge’s Audio

Only HDMI output to an HDMI input on your

AV receiver.

If your AV Receiver does not have HDMI,

connect an Optical cable from the Optical

Audio Out to an optical input on your

AV Receiver.

Use your AV Receiver’s remote to power

on the AV Receiver and set its input

to Edge.

2. Connect your TV.

If your TV has HDMI input,connect an HDMI to

HDMI cable from Edge’s Video/Audio output to

an HDMI input on your TV.

If your TV or monitor has DVI input, you will need

an HDMI to DVI adapter cable. Connect the

HDMI end to Edge’s Video/Audio HDMI output

and the DVI end to your TV or monitor.

Use your TV’s remote to power up and set

its input to Edge.

Plug in Edge’s AC cable (if you haven’t done

so already).

Connect your AV Receiver to

the Audio Only HDMI output

if the Receiver has HDMI.

Connect your AV Receiver to

the Optical Audio Out

connector if your Receiver

does not have HDMI.

Display Wizard: Step 1, Configure Your Outputs

EDGE automatically chooses a Display Name, Video Output Format, and Audio Output Connector. Use the Display Wizard to make

any changes you would like, OR accept the automatic settings, and EXIT the Wizard (Left Arrow).

1a. Name your Display

If you want to change the name of

your display, press Right Arrow

to go to the on-screen keyboard.

Otherwise, press Down Arrow

to go to the next setup step 2.

1b. Name your Display - Keyboard

Use this on-screen keyboard

to rename your display.

When you are finished, highlight

“Finish” then press OK to accept the

new name.

If you want to exit the keyboard

screen with no changes,

highlight “cancel” then press OK.

You should see the Display Wizard

on your TV as shown left. The Display

Wizard assists setup of your TV and

your audio.

Using Display Wizard, you can

1. Name your Display.

2. Select an output video format.

3. Select an output connector for

audio.

If you don’t want to change anything,

press Left Arrow to Exit the Wizard.

Display Wizard: Step 2, Video Output Format

EDGE automatically chooses a Video Output Format by polling your display for its preferred format. Or, you may use the Display

Wizard to change your Video Output Format as shown on this page.

2a. Select an output video format.

EDGE defaults to “Auto Select”

and communicates with your TV to find

the TV’s preferred format.

If you want to change the output format,

press Right Arrow to go to the Output

Format screen, shown below.

Otherwise, use Down Arrow to use

the preferred format, and proceed to

the next step 3.

2b. Output Format Selection.

Use the Down Arrow to highlight

the output format you want, then

press OK.

EDGE will switch to the new output

format. You will have to confirm that

you can see a picture within 10 seconds.

If you don’t confirm, EDGE assumes that

you can’t see the picture and will return

to the previous format.

Display Wizard: Step 3, Audio Output Connector

EDGE automatically chooses an Audio Output Connector. Or, you may choose an Audio Output Connector manually using the Display

Wizard, as shown on this page.

3a. Select an audio output connector.

You have 4 choices for audio output:

A. Auto: Default setting.

Automatically chooses an output

depending on the capabilities

of the attached, powered-on

components.

B. Video HDMI: Outputs audio on the

Video HDMI connector.

Use this setting if your TV has

audio capability and you don’t

have (or don’t want to use)

an AV Receiver.

C. Audio HDMI: Outputs audio on the

Audio HDMI connector.

Use this setting if you have

an HDMI capable AV Receiver.

D. Optical: Outputs audio on the

Audio Optical connector.

Use this setting if you have

an AV Receiver that does not

have HDMI input.

Make a selection and/or press < to exit

this screen.

You finished with your Video and Audio

output setup.

Left Arrow Exits Display Wizard

Input Wizard -- Configure Your Inputs: Step 1, Naming an Input

Input Wizard guides you through Naming an Input, Setting Input Priority (for automatic input switching),

and Associating an Audio Input with a Video Input.

Input Wizard guides you through the setup

of your input components. You can run the

Input Wizard for every input component.

Using the Input Wizard, you may

1. Rename an input component.

2. Set an Input Priority for the component.

3. Associate an Audio Input with the

video input.

1a. Input Name

Use the on-screen keyboard to

rename this input, or press

Down Arrow to go to step 2.

1b. Input Name - Keyboard

Use this on-screen keyboard

to rename your display.

When you are finished, highlight

“Finish” then press OK to accept the

new name.

If you want to exit the keyboard

screen with no changes,

highlight “cancel” then press OK.

Input Wizard: Step 2, Set Input Priority

Input Priority is used to select inputs if EDGE is set for Auto Input Select, which is the default. If one or more inputs has active signal,

EDGE will choose the active signal with the highest priority. You may use the Input Wizard to change priority as shown on this page.

2a. Set Input Priority

Input Priority is used to auto-

matically select inputs when

EDGE is in Auto Input Select

mode, which is the default.

If EDGE is in Auto Input

Select Mode, and multiple

inputs are powered on, then

EDGE will select the input

with the Highest Priority.

If you don’t want to change

Input Priority, press Down

Arrow to go to step 3.

2b. Change Input Priority

To change Input Priority put

the highlight bar over the

input you want to change

then press OK.

Use Down Arrow to move

the selection, then press OK

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Convertidor de medios de DVDO

DVDO

DVDO EDGE Manual de usuario

DVDO

DVDO EDGE Manual de usuario

DVDO

DVDO iScan Duo Manual de usuario

DVDO

DVDO iScan Duo Manual de usuario

DVDO

DVDO DVDO-VGAHDMI-1 Manual de usuario

DVDO

DVDO DVD VCR Combo Guía de configuración

DVDO

DVDO iScan VP20 Instrucciones de funcionamiento

DVDO

DVDO iScan VP50 Manual de usuario

DVDO

DVDO iScan Ultra Manual de usuario

DVDO

DVDO iScan VP20 Manual de usuario

DVDO

DVDO iScanPlus V2 Manual de usuario

DVDO

DVDO EDGE Manual de usuario

DVDO

DVDO iScan Duo Manual de usuario

DVDO

DVDO DVDO-DAConv-1 Manual de usuario

DVDO

DVDO DVDO-Splitter-14-SE Manual de usuario

DVDO

DVDO iScan VP50PRO Manual de usuario

DVDO

DVDO EDGE GREEN Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario