DuraVision FDS1702N Guía del usuario
中文
English Deutsch Français
Setup Manual
Important: PleasereadthisSetupManualandtheUser’sManualstored(ontheCD-
ROM)carefullytofamiliarizeyourselfwithsafeandeffectiveusage.Please
retainthismanualforfuturereference.
Installationshandbuch
Wichtig: LesenSiediesesHandbuchzurEinrichtungunddasBenutzerhandbuch
(aufderCD-ROM)aufmerksamdurch,umsichmitdersicherenund
efzientenBedienungvertrautzumachen.BewahrenSiediesesHandbuch
zumspäterenNachschlagenauf.
Manuel d’installation
Important : VeuillezlireattentivementceManueld’installationetleManueld’utilisation
(inclussurleCD-ROM)andevousfamiliariseravecceproduitetde
l’utiliserefcacementetentoutesécurité.Veuillezconservercemanuel
pourréférenceultérieure.
设定手册
重要事项： 请仔细阅读本设定手册和用户手册（储存在光盘上），以便掌握如何安全、
有效地使用本产品。请保留本手册，以备日后参考。
1
English
SAFETY SYMBOLS
This manual and this product use the safety symbols below. They denote critical information. Please read them
carefully.
WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life
threatening.
CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or
property or product damage.
Indicates an attention to be required. For example, the symbol illustrates the hazard type
such as “the risk of electric shock”.
Indicates a prohibited action. For example, the symbol illustrates a particular prohibited
action such as “Do not disassemble”.
Indicates a mandatory action that must be followed. For example, the symbol illustrates
the notication of general prohibition such as “Grounding the unit”.
About Setup Manual and User’s Manual
Setup Manual
(this manual)
Describes basic information ranging from connection of the
monitor to a PC to using the monitor.
User’s Manual of
this monitor*1 Describes the application information of the monitor such as
screen adjustments, settings, and specications.
NetDA Manager
User’s Manual*1
Describes the installation and use of the NetDA Manager
(special software for network connection) and the network
conguration of the monitor.
Touch Panel Driver
User’s Manual*1*2 Describes the installation and use of the touch panel driver.
*1 PDF le on the CD-ROM (Installation of Adobe Reader is required.)
*2 Used only for the FDS1702NT.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation. EIZO Corporation
is under no obligation to hold any submitted material or information condential unless prior arrangements are made
pursuant to EIZO Corporation's receipt of said information. Although every effort has been made to ensure that this
manual provides up-to-date information, please note that EIZO monitor specications are subject to change without
notice.
2
PRECAUTIONS
IMPORTANT
• To ensure personal safety and proper maintenance, please read carefully this section and the caution statements
on the monitor.
Location of the Caution Statements
WARNING
If the unit begins to emit smoke, smells like something is burning, or makes strange
noises, disconnect all power connections immediately and contact your local EIZO
representative for advice.
Attempting to use a malfunctioning unit may result in re, electric shock, or equipment damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in re, electric shock, or burn.
Refer all servicing to qualied service personnel.
Do not attempt to service this product yourself as opening or removing covers may result in re, electric
shock, or equipment damage.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet
may result in re, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet,
unplug the unit immediately. Have the unit checked by a qualied service engineer before using it again.
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the unit falls,
disconnect the power immediately and ask your local EIZO representative for advice. Do not continue
using a damaged unit. Using a damaged unit may result in re or electric shock.
Use the unit in an appropriate location.
Not doing so may result in re, electric shock, or equipment damage.
• Do not place outdoors.
• Do not place in a transportation system (ship, aircraft, train, automobile, etc.) where it may be affected
by strong vibration or shock.
• Do not place in a dusty or humid environment.
• Do not place in a location where water is splashed on the screen (bathroom, kitchen, etc.).
• Do not place in a location where the steam comes directly on the screen.
• Do not place near heat generating devices or a humidier.
• Do not place in a location where the product is subject to direct sunlight.
• Do not place in an inammable gas environment.
• Do not place near devices which generate a strong electromagnetic eld (magnets, radios, wireless
devices, etc.).
3
English
WARNING
To avoid danger of suffocation, keep the plastic packing bags away from babies and
children.
Make sure the power cord meets the following requirements.
This product does not include a power cord. Please provide separately a power cord which meets the
requirements. (For more information, please contact your local EIZO representative.)
• The power cord is compatible with the standards of the country and region in which this product is to be
used.
For example
For Europe : The power cord set has rated value of at least AC250V/ 6A and has cord type H05VV-F,
GTCE-3, 0.75mm2.
For USA : The power cord set has rated value of at least 125V/ 10A and has cord type SVT,
3/18AWG (0.75mm2).
To disconnect the power cord, grasp the plug rmly and pull.
Tugging on the cord may damage and result in re or electric shock.
The equipment must be connected to a grounded main outlet.
Failure to do so may result in re or electric shock.
Use the correct voltage.
• The unit is designed for use with a specic voltage only. Connection to another voltage than specied
in this User’s Manual may cause re, electric shock, or equipment damage.
• Do not overload your power circuit, as this may result in re or electric shock.
Handle the power cord with care.
• Do not place the cord underneath the unit or other heavy objects.
• Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may result in re or electric
shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user’s manual of the arm stand and
install the unit securely.
Not doing so may cause the unit to become unattached, which may result in injury or equipment damage.
When the unit is dropped, please ask your local EIZO representative for advice. Do not continue using a
damaged unit. Using a damaged unit may result in re or electric shock. When reattaching the tilt stand,
please use the same screws and tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth. If any part
of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical
symptoms result, please consult your doctor.
4
CAUTION
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is
dangerous. It may result in injury.
When carrying the unit, grasp and hold it rmly by the bottom as shown
in the illustration on the right.
Dropping the unit may result in injury or equipment damage.
Do not install the unit in a closed space.
If the interior becomes hot, it may result in re, electric shock or damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in re.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric shock.
If you plan to leave the unit unused for an extended period, disconnect the power cord
from the wall socket after turning off the power for safety and power conservation.
5
English
Package Contents
Checkthatallthefollowingitemsareincludedinthepackagingbox.Ifanyitemsaremissingordamaged,contact
yourlocalEIZOrepresentative.
Note
• Please keep the packaging box and materials for future movement or transport of the monitor.
• Monitor
• WirelessLANantenna(2pcs.)
• EIZOLCDUtilityDisk(CD-ROM)
• SetupManual(thismanual)
• CautionsforSetup
• Clamper(2pcs.)
Attention
• This product does not include a power cord. Please provide separately a power cord which meets the usage requirements.
For more information, please contact your local EIZO representative.
Controls and Functions
20
18
9 10 11
12
13 14 1516
71 2 3 4 5 6 8 9
17
a b
a
b
c
d
CONNECT ALERT STATUS LINK
19
Adjustmentmenu
(ScreenManager*1)
1. Auto EcoView sensor Detectsambientbrightness.AutoEcoViewfunction.
2. button Displaysthecongurationinformationofthenetwork.
3. button Displaysthevolumeadjustmentmenu.(Press or toadjustvolume.)
4. button Switchesinputsignalsfordisplay.
5. button DisplaystheAdjustmentmenu,determinesanitemonthemenuscreen,andsaves
valuesadjusted.
6. button • Providesthemenuselectionaswellastheadjustmentandsettingofafunction.
• Displaysthebrightnessadjustmentmenu.(Press or toadjustbrightness.)
7. button Turnsthepoweronoroff.
8. Power indicator Indicatesthemonitor’soperationstatus.
Blue:OperatingOrange:PowersavingmodeOFF:Mainpower/Poweroff
9. Speaker*2 Outputsaudiosource.
10. Main power switch Turnsthemainpoweronoroff.
11. Power connector Connectsthepowercord.
12. LAN Port Connectsthenetworkcable.
a) LinkLED Green/
Darkorange
Lightsupdarkorange:
AnetworkconnectionisestablishedviaawiredLAN
(1000BASE).
Lightsupgreen:
AnetworkconnectionisestablishedviaawiredLAN
(10BASE/100BASE).
OFF:AnetworkconnectionisdisabledviaawiredLAN.
b) StatusLED Orange Flashes:Datatransferisinprogress.
6
13. USB Port (Down) ConnectsaperipheralUSBdevice.
Attention
• The connected device can only be operated using a PC linked via a network.
• When connecting a storage device, it is necessary to enable “Storage Device Connection”.
For details, refer to the NetDA Manager User’s Manual (on the CD-ROM).
14. Mic input connector*2 Connectsthestereominijackcable(micinput).
15. Line output
connector*2 Connectsthestereominijackcable(speakeroutput).
16. Input signal connector D-Submini15-pinconnector
17. Wireless LAN antenna ThisisanantennatobeattachedforawirelessLANcommunication.
Attention
• Protective caps are attached before shipping. Leave the protective caps in place when the
wireless LAN is not being used with the monitor.
• If the antenna mounting position has any dust particles attached or static electricity present,
it may cause a malfunction.
18. Network LED Displaysthenetworkstatus.
a)LINKLED Green/
Orange
Lightsuporange:
Anetworkconnectionisestablishedinthe2.4GHz
band.
Lightsupgreen:
Anetworkconnectionisestablishedinthe5GHzband.
OFF:Wirelesscommunicationisdisabled.
b)STATUSLED Orange Flashes:Wirelessdatatransferisinprogress.
c)ALERTLED*3 Green/
Red
Flashesinred(0.25secinterval):Wirelessdeviceerror
Flashesinred(1secinterval):
Failedtoauto-connectwhenthemonitorwasturnedon./
Failedtomakealinkviakeyboardoperation.
Flashesingreen:
SearchingforradiowavesattheDFSstartupisin
progress.
Lightsupgreen:
SwitchingchannelsbyDFSfunctionisinprogress.
OFF:Operatingcorrectly
d)CONNECTLED Green Lights:ConnectingtoaPC
Flashes:NotconnectedtoaPC
19. Clamper
Securescables.
20. Stand Usedtoadjusttheangleofthemonitorscreen.
*1 ScreenManager is an EIZO’s nickname of the Adjustment menu. For how to use ScreenManager, refer to the Monitor User’s
Manual (on the CD-ROM).
*2 Audio input to and output from the monitor are possible only when the monitor is linked to a PC via a network. (When the
monitor is connected to a PC using an analog signal cable, the audio input/output is not supported.)
When inputting/outputting audio, it is necessary to set up an “Audio Device Connection”. For details, refer to the NetDA
Manager User’s Manual (on the CD-ROM).
*3 This product supports the DFS (Dynamic Frequency Selection) function.
(The DFS is a function in which the frequency band currently being used is changed on a wireless LAN access point. It
prevents the wireless LAN communication from adversely affecting other devices such as weather radar.)
7
English
Setup
There are two ways to connect the monitor to a PC as follows (analog and network connections).
Set up the monitor depending on the desired monitor usage.
Analog Connection (see “Analog Connection” (page 8))
Connectionusingasignalcable
Signal Cable
(Analog Connection)
Network Connection (see “Network Connection” (page 9))
LinkingviaawiredLAN
Network cable
(Network Connection)
Video/Audio
USB communication
LinkingviaawirelessLAN
Video/Audio
USB communication
(Network Connection)
Note
• When multiple PCs are connected to the monitor, press on the front of the monitor to switch the input signal.
• A speaker with built-in amplier can be connected to the line output connector of the monitor to output audio.
External speaker
• Audio input to and output from the monitor are possible only when the monitor is linked to a PC via a network.
Example:
8
● Analog Connection
Attention
• Check that the monitor and the PC are powered off.
• When replacing the current monitor with this monitor, be sure to change the PC settings for the resolution and vertical
scan frequency to those appropriate to the this monitor.
For details regarding compatible resolutions, refer to the Monitor User’s Manual (on the CD-ROM).
• Audio input/output is not supported for analog connections.
1. Connect the signal cables to the input signal connectors and PC.
Check the shape of the connectors, and connect the cables.
After connecting the signal cable, tighten the screws of the connectors to secure the coupling.
DVI
D-SUB
D-SUB
2.
Plug the power cord into a power outlet and the power connector on the
monitor.
3.
Press to turn on the monitor.
The monitor’s power indicator lights up blue.
4.
Turn on the PC.
The screen image appears.
If an image does not appear, refer to “No picture” (page 14) for additional advice.
Attention
• Turn off the monitor and PC after using them.
• For the maximum power saving, it is recommended that the Power button be turned off. Turning off the main power
switch or unplugging the power plug completely shuts off power supply to the monitor.
Signalcable
FD-C16(option)
Signalcable
MD-C87(option)
or
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
