Duplo DP-63P Manual de usuario
Store this manual so that it can be retrieved whenever needed.
Instruction Manual
DP-63P
Ver.1
Correct operation and periodic maintenance are
essential for ensuring safe use of this machine.
Thoroughly read this manual before using this
machine.
DUPLO CORPORATION
DP-43SH/63SH
DP-43SH/63SH
1
1
2
1
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Thank you for your purchase of the Duprinter DP-43SH/63SH.
To ensure safe and efficient prolonged use of this machine, read and thoroughly understand this manual before
using this machine. After using this manual, be sure to keep it in a place to handy reference.
Introduction
PLEASE NOTE
In the interest of upgrading our products, specifications and other data given in this manual are subject to
change without notice. If the manual contains anything that you do not understand, contact the manufac-
turer for clarification.
2
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
The following is a quick reference to the functions of the DP-43SH/63SH printer.
A3 Printout
B5 Printout
A4 Document
Enlargement/Reduction ........ (aP.41)
This function copies a document on one standard paper size to another larger or smaller standard paper size.
94% Reductio .........(aP.50)
This function slightly reduces the size of a document when printing to the same standard paper size as the docu-
ment.
Auto Zoom .........(aP.51)
This function automatically sets the zoom ratio according to the size of the document and the selected print paper
size.
1%-Step Enlargement and Reduction .........(aP.54)
This function enlarges or reduces a document in 1% steps between 50% and 499%.
A4 Document A4 Printout
(94%)
B4 Document A4 Printout
(81%)
Document
Printout
Function Quick Reference
3
2
1
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Function Quick Reference
Text/Photograph/Text and Photograph/Finelettering Print Modes ..........(aP.57)
This function selects the optimum print quality to match the document.
Screen Mode .........(aP.58)
This function processes non-screened photographs.
Photo Dark Mode ........ (aP.60)
This function enhances the dark portions of photographs.
Book Shadow Eraser Mode .........(aP.61)
This function erases the shadows on the center or edges of book or other folded documents when printing the open
spread.
ABCDEFGH
ABCDEFGHIJKLNO
PQRSTUVWXYZ
abcdefghijklmnopqrs
tuvwxyz
ABCDEFGHIJKLNO
PQRSTUVWXYZ
abcdefghijklmnopqrs
tuvwxyz
ABCDEFGHIJKLNO
PQRSTUVWXYZ
ABCDEFGHIJKLM
ABCDEFGHIJKLNOPQRST
UVWXYZ
abcdefghijklmnopqrstuvwxyz
ABCDEFGHIJKLNOPQRST
UVWXYZ
abcdefghijklmnopqrstuvwxyz
ABCDEFGHIJKLNOPQRST
UVWXYZ
abcdefghijklmnopqrstuvwxyz
ABCDEFGHIJKLNOPQRST
UVWXYZ
abcdefghijklmnopqrstuvwxyz
ABCDEFGHIJKLNOPQRST
UVWXYZ
ABCDEFGHIJKLM
ABCDEFGH
ABCDEFGHIJKLNO
PQRSTUVWXYZ
abcdefghijklmnopqrs
ABCDEFGHIJKLNOPQRST
UVWXYZ
abcdefghijklmnopqrstuvwxyz
ABCDEFGHIJKLNOPQRST
UVWXYZ
Text
Text/PhotographText/Fine lettering
Photograph/Fine lettering
Photograph
With Photo Dark Without Photo Dark
Document
Printout
Document
Printout
Printout
With shadow eraser
Without shadow eraser
Screen1 Screen2
4
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Function Quick Reference
Multiple Printing ........ (aP.63)
This function prints multiple images of a document on one page.
2-in-1 Layout available only with ADF installed .........(aP.65)
This function prints two different documents on one page.
Sectional Printing ........ (aP.70)
You can print the specified number of sets of copies in each set.
2 images
4 images
8 images
Document
Documents
Printout
1
1
1
1
1
1
1
1
Document 1st set
5 copies x 2 sets 2nd set
3 copies x 4 sets 3rd set
2 copies x 5 sets
11 1 1
5
2
1
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Function Quick Reference
Changing Print Quantity per Document .........(aP.73)
This function changes the number of prints made from each document.
2
2
2
3
2
3
3
3
3
1
Documents
1
13
1st document
5 copies x 2 sets 2nd document
3 copies x 4 sets 3rd document
2 copies x 5 sets
2
6
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Contents
Introduction......................................................................................................................... 1
Function Quick Reference ................................................................................................. 2
Notes on Safety (Please Read and Observe) ................................................................... 9
Safety Precautions .............................................................................................. 9
Warning Sticker ........................................................................................................ 12
Positioning the Machine ........................................................................................... 14
Maintenance............................................................................................................. 15
Printing and Duplicating Cautions ............................................................................ 16
Conventions Used in This Manual ............................................................................ 17
Chapter 1 Before UsingThis Machine
System Setup.................................................................................................................... 20
Part Names and Their Functions..................................................................................... 21
Printer Appearance .................................................................................................. 21
Control Panel............................................................................................................ 24
LCD Panel ................................................................................................................ 26
Keys Inside Panel Cover .......................................................................................... 26
Turning Power ON/OFF .................................................................................................... 28
Turning ON Printer Power......................................................................................... 28
Turning OFF Printer Power....................................................................................... 29
Standard Mode......................................................................................................... 29
Key Card Counter [Available only with Key Card Counter installed]......................... 30
Document/Printing Paper Specification ......................................................................... 31
Acceptable Documents ............................................................................................ 31
Acceptable Printing Paper ........................................................................................ 31
How Platemaking and Printing is Performed ................................................................. 32
Platemaking.............................................................................................................. 32
Printing ..................................................................................................................... 32
Chapter 2 Printing Using Basic Functions
Basic Printmaking ............................................................................................................ 34
Loading and Replacing Paper ......................................................................................... 37
Loading Documents ......................................................................................................... 38
Positioning the Document......................................................................................... 38
Loading Document on Document Glass Plate ......................................................... 39
Loading Document in ADF [Available only when ADF is installed]........................... 40
Enlarging/Reducing from Standard-Size Document to Standard-Size Paper ..... 41
Selecting Printing Paper Size .................................................................................. 43
Print Output....................................................................................................................... 45
Output to Print Tray................................................................................................... 45
7
2
1
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Contents
Chapter 3 Printing With Various Function
Enlargement and Reduction............................................................................................ 50
94% Reduction
x94%
................................................................................................. 50
Auto Zoom
AUTO
........................................................................................................ 51
1%-Step Enlargement and Reduction .............................................................. 54
Adjusting Darkness.......................................................................................................... 55
Adjusting Plate Darkness ................................................................................. 55
Adjusting Print Darkness .................................................................................. 56
Printing Photographs and Color Documents ................................................................ 57
Text/Photograph/Text and Photograph Mode .................................................... 57
Fine Text/Screen Mode
S
/ ............................................................................. 58
Photo Dark Mode .............................................................................................. 60
Book Shadow Eraser Mode ...................................................................................... 61
Multiple Printing on One Page ........................................................................................ 63
Multiple Printing
MULTIPLE
PRINTING
................................................................................................ 63
2-in-1 Layout
2 in 1
[Available only with ADF installed] ............................................. 65
Saving Settings
MEMORY
......................................................................................................... 67
Saving Settings ........................................................................................................ 67
Retrieving Settings ................................................................................................... 69
Sectional Printing ...................................................................................................... 70
Sectional Printing ..................................................................................................... 70
Sectional Printing (changing print quantity per document)....................................... 73
Dividing Sections with Tape [Available only with Tape Cluster Device]..................... 76
Chapter 4 Miscellaneous Functions
Confidential Safeguard Function ............................................................................ 78
Total Counter Display Function....................................................................................... 79
Print Speed Adjustment Function
SPEED
........................................................................... 80
Printing Position Adjustment Function .................................................................. 81
Special Functions ..................................................................................................... 82
Fine Start “Startup Time Setting”.............................................................................. 82
Fine Start “Operation at Next Platemaking” ............................................................. 85
Auto Clear ................................................................................................................ 88
Preprint..................................................................................................................... 90
Print Number Input Mode ......................................................................................... 92
Change Initial Settings ............................................................................................. 94
On-Line Print Function [Available OnlyWith Interface Kit Installed]........................... 96
8
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Contents
Chapter 5 Replacing Consumables
Replacing the Ink Pack..................................................................................................... 98
Replacing the Master Roll.............................................................................................. 101
DP-43SH ................................................................................................................ 101
DP-63SH ................................................................................................................ 104
Replacing the Master Ejection Core ............................................................................. 107
Replacing the Drum Unit................................................................................................ 109
Removing the Drum Unit ........................................................................................ 109
Installing the Drum Unit .......................................................................................... 110
Chapter 6 Troubleshooting
Power Does NotTurn ON ............................................................................................... 114
Platemaking/Printing is Not Possible ........................................................................... 115
Error Messages............................................................................................................... 116
Supplying or Changing Paper While Printing .............................................................. 120
If Paper Runs Out During Printing.......................................................................... 120
Adding Paper While Printing................................................................................... 120
Changing Paper Selection...................................................................................... 121
Paper Jams ..................................................................................................................... 122
When “PAPER JAM” is displayed (Feed Tray) ........................................................ 122
When “PAPER JAM” is displayed (Print Tray) ......................................................... 123
When“PLATE EJECTION ERROR” is Displayed ......................................................... 127
When“MASTER SETTING ERROR”is Displayed ........................................................ 130
When“SET MASTER ROLL PROPERLY”is Displayed................................................ 132
Chapter 7 Specifications and Maintenance
Specifications ................................................................................................................. 136
Appendix
Index ................................................................................................................................ 140
Quick Operation Guide .................................................................................................. 143
9
2
1
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Notes on Safety (Please Read and Observe)
Safety Precautions
Various symbols and pictures are used in this manual and on the stickers affixed to the machine. These symbols and
pictures provide warnings and instructions to prevent danger to you or other personnel, and to prevent damage to office
property. The meanings of these symbols and pictures are explained below.
WARNING Indicates a high degree of potential danger. If the warning is ignored, death or serious
injury may result.
CAUTION Indicates a medium degree of potential danger. If the caution is ignored, medium injury or
damage to property may result.
[Examples of Pictorial Symbols]
A circle with a line through it indicates a prohibited action. The particular act prohib-
ited is indicated by a picture inside the circle. (In the example shown here, the prohibited
act is disassembly.)
A black disc indicates an instruction, or sometimes a prohibited action. The instruction
itself is indicated by pictorial symbols drawn in white on the disc. (In the example shown
here, the instruction is “Remove the plug from the outlet.”)
• These are particularly important safety points and should always be observed.
WARNING
If the machine is used after foreign matter (metal fragments, water, or liquid) has entered the
machine, this may result in fire or electric shock.
• Turn the main unit’s power switch OFF, and then remove the power plug from the outlet. Contact
the sales distributor.
If the machine is used after heat, smoke, strange smell, or other abnormality is detected, this may
result in fire or electric shock.
• Turn the main unit’s power switch OFF, and then remove the power plug from the outlet. Contact
the sales distributor.
Use only the power cord that is provided among the accessories.
Tabla de contenidos
Otros manuales de Impresora de Duplo
Duplo
Duplo Duprinter DP-203 Manual de usuario
Duplo
Duplo DSF-2000 Manual de usuario
Duplo
Duplo DUPRINTER DP-C100 Manual de usuario
Duplo
Duplo DSF-2000 Manual de usuario
Duplo
Duplo DSC-10/60i Manual de usuario
Duplo
Duplo DSF-2000 Manual de usuario
Duplo
Duplo DP-J450 Manual de usuario
Duplo
Duplo Duprinter DP-43E Manual de usuario
Duplo
Duplo DP-U850 Manual de usuario
Duplo
Duplo DUPRINTER DP-440 Manual de usuario
