Dual XHUD1000 Manual de usuario
1. Turn on the XGPS190 and choose your
XGPS190 under the Bluetooth list from
the Android settings.
2. Power up XHUD1000. Dual logo will
appear on HUD screen. After logo
disappears, open Dual ADS-B Status
Tool app.
3. Go to HUDControl tab of app, and tap
the “XHUD” switch to connect HUD.
4. Tap “Dual ADS-B Receiver” and choose
the XGPS190.
Your HUD should now be connected. You can select
AHRS, Traffic, and other settings from HUD Control Tab.
XHUD1000 Quick Start
For XHUD1000 & XGPS190 with Android
XHUD1000 Firmware
update steps for Android devices
1. Power up XHUD1000. Dual logo will appear
on HUD screen for a few seconds. After logo
disappears, open Dual ADS-B Status Tool app.
2. Select HUDControl tab, and tap ‘XHUD’ to
connect your HUD.
3. Tap ‘Check Update’.
4. Tap ‘Download’, if there is new version
available. Follow the instructions on your
mobile device. Process takes several minutes.
Reminders:
•When updating firmware, ONLY HUD and Android device
should be powered on. Do not power up portable GPS
receiver or other devices.
•Ensure that WiFi and Bluetooth are enabled in Android
device, and that Android device is connected to internet.
•Do not unplug HUD during firmware update process.
Otros manuales para XHUD1000
1
Tabla de contenidos
Otros manuales de Pantalla aviónica de Dual
Manuales populares de Pantalla aviónica de otras marcas
Smart Avionics
Smart Avionics PB-4 Manual de usuario
Midcontinent
Midcontinent SAM MD302 Manual
MGL Avionics
MGL Avionics Stratomaster Maxi Single FF-3 Manual de usuario
Garmin
Garmin GI 275 Manual de usuario
Mid-Continent Instruments
Mid-Continent Instruments 4300 Series Manual
Avidyne
Avidyne 700-00182 Series Manual de servicio
